• The korean journal of orthodontics
• /
• v.33 no.2 s.97
• /
• pp.73-84
• /
• 2003

This study was performed to find out how much projection errors in the cephalometric measurements were made by vertical head rotation in taking posteroanterior cephalograms. 25 adults without any apparent facial asymmetry or severe sagittal skeletal discrepancy were selected and the posteroanterior cephalograms were taken with the head rotated $5^{\circ},\;10^{\circ}$ superior and inferior each to the reference $position(0^{\circ})$. The 7 height, 5 width and 6 angular measurements were taken at each 5 positions. Through the statistical analysis of all measurements taken at each rotated position, folowing results were obtained.1. The projection errors of height measurements were remarkably target than those of width or angular measure nents. f. Among the height measurements, the farther to the rotation axis the measurements were, the larger the projection errors were. 3. Among the width measurements, mandibular width and mandibular width of mandibular first molars showed significant differences between the values taken at each rotated position, while nasal width, maxillary width and intermolar width of maxillary first molars did not. 4. Among the angular measurements, the angle between horizontal reference line and the line that is connected to crista galli and antegonion or maxillare showed significant differences between the values taken at each rotated Position. The above results suggest that it is needed to the effort to keep constant head position for taking the useful posteroanterior cephalogra, because projection errors are caused by vertical head rotation.

• The korean journal of orthodontics
• /
• v.32 no.2 s.91
• /
• pp.91-105
• /
• 2002

In general, orthodontists make problem lists and treatment plans based on norms of several cephalometric standards. But consideration of dentoalveolar compensation, which tends to maintain normal dental arch relationship in various skeletal jaw relationships, helps orthodontists make more individualized treatment objectives and plans. The purpose of this study was to classify skeletal patterns of normal occlusion samples by cluster analysis and to investigate the dentoalveolar compensation according to skeletal patterns. The subjects were consisted of 125 subjects who were normal occlusion samples at Seoul National University Dental Hospital, Department of Orthodontics. Lateral cephalograms in centric occlusion were traced and digitized. The skeletal patterns of normal occlusion samples were classified into three horizontal groups and three vertical groups by cluster analysis and ANOVA on the skeletal and dentoalveolar measurements among the groups were carried out. The results were as follows ; 1. Anteroposterior and vertical skeletal relationships of normal occlusion samples were very variable. 2. As the mandibular position was anterior to the maxilla, the maxillary incisors inclined more labially, the mandibular incisors more lingually, and the occlusal plane was flattened due to the anteroposterior dentoalveolar compensation. dentoalveolar height was decreased and upper posterior teeth was uprighted to the palatal plane and lower incisors and lower posterior teeth to the mandibular plane. 4. Lower incisors were more strongly associated with the dentoalveolar compensation than upper incisors according to the anteroposterior and vertical skeletal relationship.

• Fire Science and Engineering
• /
• v.34 no.1
• /
• pp.47-54
• /
• 2020

This paper proposes a solution to the problems of constructing and installing sway braces for existing standpipes in narrow spaces and pits. The study develops a floor-fixed sway brace for a narrow space that can support the ground area under horizontal seismic loads (X-axis, Y-axis) as well as vertical seismic loads (Z-axis). The results of structural analysis using SolidWorks simulation showed that the eccentric load was generated in the first design according to the anchored position along the vertical direction, and the problem of exceeding the allowable stress of the material along the horizontal and vertical directions. In the second design model, deformation caused by the eccentric load along the vertical direction, similar to the first design model, did not occur. The maximum strain rate was 0.17%, which is approximately 12.84% less than the first design model (Maximum strain rate of 13.01%). It was confirmed that the structural stability and durability improved. Compressive and tensile load testing of the prototypes showed that all of them meet the performance criteria of the standard.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.137-143
• /
• 2014

Recently, as new paradigm for government operation called government 3.0, government is actively operating policy opening and sharing public data. In addition, the Ministry of Land are operating an open platform integrated map service (the VWorld) which provides a variety of video contents such as the country's national spatial information, traffic information and three-dimensional building for the public. According to W3C Foundation's Open Data Status Report(2013), our country has the evaluated results that the part of the government's policy support and planning is good while the part of the data management is vulnerable. So our country needs the quality improvement for the data management. In addition, a digital aerial photograph image data is required to be up-to-date for the three-dimensional spatial object data. In this paper, we present the method for enhancement of the accuracy of vertical position and for maintainment of up-to-date vertical position. Our methods evaluate the data quality and analyze the cause of error of measurement utilizing the national standard quality assessment method. The result of research shows that the accuracy of vertical position is improved if the height of the building captain is adjusted by the quality assessment values and a three-dimensional model has up-to-date data if reconstruction and extension information of construction register is utilized.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.12
• /
• pp.81-92
• /
• 2017

According to the revision of the Housing Act in 2013, it has been possible to carry out an apartment remodeling project involving two to three floor vertical extension. The remodeling project with vertical extension requires foundation reinforcement because structural safety due to additional load and enhanced seismic criteria must be met. In this case, structural analysis is performed to analyze the load distributed to existing PC pile and reinforced additional pile. The vertical stiffness ($K_v$) of the pile is required for structural analysis, but the research on the 20~30 year old PC pile stiffness is very limited. In this paper, the stiffness of the PC pile in accordance with the change of diameter and length was analyzed by examining the results of 38 field pile load tests performed during the construction of the apartments in the 1990's. As a result of the analysis, the pile stiffness decreases with the increase of the length-diameter ratio (L/D). In addition, the results of on-site pile load test are compared with the coefficient 'a' for estimating pile stiffness proposed in Korea Highway Bridge Design Standard (2008) and the Pile Foundation Design Guideline of Korea Railroad Corporation (2012). It shows that 'a' obtained through the estimation of the literature is very similar to the field test results in the range of 10

• Environmental and Resource Economics Review
• /
• v.13 no.1
• /
• pp.119-131
• /
• 2004

A green market refers to a market that consists of environmentally aware consumers. A few researches have been carried out on the effects of environmental policy measures in a green market. These existing researches were based on a vertical differentiation model with firms' price-setting behavior, and derived that unit emission standard and environmental product taxes could not reduce the amount of pollution emission. This note considers a vertical differentiation model with firms' quantity-setting behavior, and shows that, contrary to the previous result, the amount of pollution emission is reduced by the introduction of unit emission standard. This implies the importance of the nature of firms' interaction in figuring out the pollution abatement effect of environmental policy measures in a green market.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.321-325
• /
• 2004

국내 충적층의 철, 망간 문제는 지속적으로 지적되어오던 수질항목이다. 충적층 지하수 내 철과 망간의 용존 특성을 확인하고자 강변여과수 부지에서 지하수의 수리지화학적 특성을 조사하였다. Fe와 Mn에 의해 오염된 관정은 D-2와 DS-3로 모두 3월에 채취한 시료이며 NO$_3$-N는 모두 0 m/L 이다. NO$_3$-N에 대해 다른 관정은 2 mg/L NO$_3$-N를 넘고 있으며, DS-8와 DS-3에서 11.30과 20.2 mg/L NO$_3$-N의 값으로 먹는물 수질기준을 초과하고 있다. Mn에 대해 오염된 관정은 SJ-3이다. 10월에 채취한 시료에서 DS-2+l8 m에서 채취한 시료가 1.16 mg/L인 것을 제외하고 대부분의 시료가 2 mg/L를 초과하고 있고, DS-6+l3 m과 SJ-3＋10 m에서 채취한 시료가 각각 10.71과 10.31 mg/L NO$_3$-N로 먹는물 수질기준을 초과하고 있다. DO 검층 자료와 NO$_3$-N 농도를 이용하여 Fe와 Mn이 먹는물 수질 기준을 초과하는 D-2와 DS-2 관정의 지하수 체의 혐기성 상태임을 확인하였다. 강변여과수 지역은 전반적으로 NO$_3$-N에 대해 인위적인 오염이 발생하고 있으며, 혐기성 상태 구간이 존재함에 따라서 Fe와 Mn이 먹는물 수질 기준을 초과하여 용존 상태로 존재한다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.10a
• /
• pp.25-28
• /
• 2010

최근 건축물의 초고층화에 따른 커튼월 시공에 따라 유리의 비중이 증가하고 있으나 커튼월 구조는 바람, 지진, 화재에 있어서 취약할 것이라 판단되어 국내외 건축용 유리 및 커튼월의 안전기준에 대한 조사를 실시하였다. 그 결과, 국내의 유리 기준은 단열 및 내풍압 성능에만 집중되어있으며 화재 및 지진, 안전 성능에 대한 기준이 미비한 실정이다. 따라서 국내에 적합한 유리 안전성 평가 프로세스를 구축하기 위한 기초 데이터를 마련하기 위해 유리 내화 실험을 시행하였다. 실험 결과, 일반유리, 복층유리, 강화유리, 접합유리 순의 파열 시간을 가지는 것을 알 수 있었으나 시험체 4개가 화재 초기에 파열되는 것으로 나타나 상층부로의 수직 화재 확대 위험성이 높을 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.284-284
• /
• 2022

최근 세계적으로 급변하는 기후는 연 강수량이 여름에 집중되는 한국 강우 특성에 큰 영향을 미치고 있다. 특히 도시화된 대도시의 배수 시설 능력 부족은 돌발 강우, 국지성 집중 호우로 인한 침수 피해를 야기한다. 미국, 유럽, 일본 등의 선진국의 경우 대심도 저류배수터널을 설치하여 운영하고 있으며, 이에 대한 시설운영기준 및 매뉴얼 개발 등에 관한 연구가 활발히 이루어져 왔다. 그러나 국내에는 이와 같은 시설물에 대한 운영사례가 없고, 시설물 내 복잡한 수리 현상에 대한 수리모형 실험도 부족한 실정이다. 따라서 본 연구는 서울시 강서·양천 일대에 설치된 대심도 터널인 신월 빗물저류배수시설을 대상으로 선정하였으며, 안정적인 운영계획 수립을 위한 최적운영기준을 개발하고자 한다. 본 연구는 도시유역 강우유출모의에 적합한 XP-SWMM 모형을 활용하여 강우조건에 따라 달라지는 수직구별 유입유량, 도달시간 등의 유출특성을 반영하고 수문개방시간을 고려한 시설물 운영기준을 산정하였다. 본 연구의 결과는 도시유역 홍수예방을 위한 빗물저류배수시설의 안정적인 운영계획 수립 및 시설물 운영 매뉴얼 개발에 기여할 수 있을 것으로 기대된다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.1
• /
• pp.61-69
• /
• 2003

There is various kinds cause that influence to created DEM and orthoimage using stereo satellite images. Specialty, research about effect that GCP number gives to accuracy of DEM, orthoimage and modeling may have to be gone ahead. Therefore, this research increases GCP number by 5 to 30 and created each modeling, DEM and orthoimage using SPOT panchromatic images that resolution is 10m by digital image processing method. Accuracy assessment did by orthoimage using 20 check point. As a result, GCP number between 10∼30 modeling RMSE is 1 pixel low appear. Horizontal·vertical error that use orthoimage looked tendency that decrease GCP number increases, and confirmed by the most economical in GCP number 10∼15. Also, analyze correlation of GCP number and orthoimage position accuracy and presented improvement plan and research task hereafter.