• Journal of Korean Tunnelling and Underground Space Association
• /
• v.7 no.1
• /
• pp.27-36
• /
• 2005

The objective of this study was to analyze the smoke movement and to investigate the effect of exhaust ventilation using by shafts for case of fire in long tunnels. Based on Froude modeling, the 1/50 scaled model tunnel (20 m long) was constructed by acrylic tubes and test were carried out systematically. The results of the shaft height test show that the effect on exhaust ventilation by a shaft delays the propagation time of backlayering, and the temperature decreases as the shaft height increases. If the fire occurs downstream of the shaft, the backlayering develops to get stronger by the shaft exhaust effect and then the propagation of CO and temperature increase along with propagation of CO. That is to say, in the case of fire downstream of the shaft, the shaft has the advantage of smoke exhaust effects, but it might result in a dangerous situation for the escaping passengers due to the more developed backlayering.

• Geotechnical Engineering
• /
• v.29 no.11
• /
• pp.27-34
• /
• 2013

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.108-108
• /
• 2023

기후변화 및 도시화로 인해 도시 내에서 증가하는 홍수로 인명 및 재산피해가 꾸준히 발생하고 있다. 특히 2022년 8월 8일 서울특별시 및 경기도 지역에 내린 폭우로 인해 8명 이상의 인명피해와 1300억원 이상의 재산피해가 발생하였다. 이러한 도시홍수를 근본적으로 방어하기 위하여 미국, 일본 등의 국가에서는 대심도 빗물저류배수터널을 활용하고 있다. 국내에서도 2011년 서울특별시 강서구 및 양천구에 발생하는 홍수를 방어하기 위하여 국내 최초 대심도 빗물저류배수터널인 '신월 빗물저류배수시설'을 건설하여 현재 운영 중에 있다. 대심도 빗물저류배수터널은 초기 개수로 흐름에서 만관 후 관수로 흐름으로 전이되는 구조물로 계획과 운영이 매우 어려운 시설이다. 이에 미국, 일본, 중국, 이탈리아 등 국가에서 대심도 빗물저류배수터널과 관련한 연구가 활발히 진행되고 있다. 본 연구에서는 대심도 빗물저류배수터널의 유입시설 중 감세부에 해당하는 수직갱과 감세지의 깊이에 따른 감세지 바닥 압력변화를 알아보기 위하여 수리실험을 수행하였다. 그 결과 감세지 깊이가 깊어질수록 바닥면의 압력이 증가하는 것으로 분석되었으며 바닥면의 압력이 감세지 깊이만큼의 정수압을 포함하는 경우 정수압 대비 최대 2.0배, 정수압을 포함하지 않는 경우 정수압 대비 최대 1.0배 인 것으로 분석되었다. 수직갱 깊이에 대한 실험 결과는 수직갱 깊이가 짧아질수록 압력이 감소하는 경향을 보이는 것으로 분석되었는데 이는 회전수 및 회전력과 관련 있는 것으로 판단된다. 향후 수직갱 직경, 수직갱 깊이에 대한 추가 연구가 필요한 것판단되며 이를 통하여 수직갱 깊이-감세지 깊이에 대한 정량적인 연구와 분석을 통해 경제적이고 안정적인 대심도 빗물저류배수터널 감세지 설계가이드라인을 제시하고자 한다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.6
• /
• pp.559-570
• /
• 2013

High speed railway can transport large quantity of people and commodities in a short time and has become one of the most desirable and environmentally friendly transportation. However, it is hard to have a complicated route for high speed railways, construction of tunnels is essential to pass through a mountain area. When a high speed train enters a tunnel, pressure wave is created in a tunnel and the wave causes micro pressure wave and discomfort to passengers. In order to alleviate pressure wave in a tunnel, constructing a vertical shaft is one of the most efficient ways. This study represents a numerical analysis module, which takes into account the effect of a vertical shaft in a tunnel. The module can be used in a numerical program (TTMA) specialized for aerodynamics in a tunnel, and it was validated by comparing numerical results with various measurements in Emmequerung tunnel and results from numerical analysis using Fluent.

• Magazine of korean Tunnelling and Underground Space Association
• /
• v.6 no.2
• /
• pp.10-37
• /
• 2004

• Magazine of korean Tunnelling and Underground Space Association
• /
• v.2 no.1
• /
• pp.42-52
• /
• 2000

• Magazine of korean Tunnelling and Underground Space Association
• /
• v.6 no.1
• /
• pp.6-34
• /
• 2004

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.1
• /
• pp.49-62
• /
• 2007

A new earth pressure equation acting on the vertical shafts in cohesionless soils has been proposed by modifying the equations proposed by others. In order to verify the modified equation, model tests which can control uniform wall displacement with depth to radial direction were conducted. Model tests were performed with three different wall friction angles and two different relative densities. The measured values were larger than estimated values when assuming $\lambda=1$ ; smaller than those when assuming $\lambda=1-sin\phi$. The parameter, $\lambda$ is the ratio of tangential stress to vertical stress and is the most critical value in proposed equation. A method which can estimate the earth pressure on vertical shafts in layered soils is also proposed by reasonably assuming the failure surface of layered soils and using the modified equation. In order to verify the proposed method, in-situ measurement data have been collected from the three in-situ vertical shafts installed in layered soils. Most of earth pressures converted from measured data match reasonably well with estimated values using proposed method.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.2
• /
• pp.135-141
• /
• 2004

The present paper concerns a smoke movement in a tunnel fire with a vertical shaft. The model tunnel measured 13.4m long, 0.4m wide and 0.4m high. The cross section is 1： 20 of a full scale tunnel. Ethanol was used as a fuel. The fire size in model tests varied from 1.35 kW to 13.37 kW, which corresponds to full scale fires of 2.41 to 23.91 MW. Smoke front velocity and temperatrue were decreased due to the vertical shaft install. Temperature was reduced maximum about 2$0^{\circ}C$ at ceiling and about 23$^{\circ}C$ at vertical position. CO concentration was reduced as the vent width widened. When vent width was more than 15 cm, CO concentration was not reached 100 ppm. Descent degree of the smoke layer was confirmed through the visualization.

• Water for future
• /
• v.52 no.12
• /
• pp.55-61
• /
• 2019