• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.191-192
• /
• 2015

국내 배전계통은 일반적으로 수지상 계통으로 운영하고 있으며 배전선로 내 과부하 해소 및 배전계통의 유지보수를 위해 상시 개방점과 구분 개폐기를 통해 루프계통으로 운전하는 경우가 있다. 이 과정은 신속한 고장 구간 분리 및 무정전 절체를 위해 루프계통 운전 시 흐르는 루프조류 등을 정확히 고려하여 판단해야 한다. 특히 배전계통 내에 에너지저장장치(Energy Storage System, ESS) 등의 분산전원이 다수 도입된 이후로, 배전계통이 기존의 단방향에서 양방향 전력공급의 특징을 갖게 됨으로 인해 기존의 루프계통 운전에 대한 판단에 추가적인 과정을 필요하게 된다. 따라서 본 논문은 배전계통 내 에너지저장장치가 연계된 경우, 루프계통 운전을 위한 에너지저장장치의 출력변동에 대한 판단을 PSCAD/EMTDC로 모델링하여 수행한다.

• Journal of Welding and Joining
• /
• v.17 no.4
• /
• pp.60-68
• /
• 1999

The previously developed two dimensional model was modified in order to predict more accurately the degree of microsegregation and eutectic fraction on in weld metal whose solidification rate is very fast. The model employed the same assumptions with previous model but considered of a tip undercooling. The previously predicted microsegregation and eutectic fraction has the discrepancies between simulated and examined results in the weld metal solidification. The experiments for the weld metal solidification of 2024 A1 and Fe-Ni alloy were carried out in order to examine the reasonability and feasibility of this modified model. The concentration profile of the solute and eutectic fraction predicted by the simulation agreed well with those found from experimental works. According to the results, it was believed that the dendrite tip undercooling considered in the modified model be reasonable for predicting the degree of microsegregation more accurately in weld metla solidification. In the GTA welds, degree of dendrite-tip undercooling increases with increasing solidification rage(welding speed). This serves to increase the concentration of dendrite core and thus result in reducing the degree of segregation. And solid state diffusion(back diffusion) during solidification is very low in the weld metal solidification so that little additional homogenization of solute occurs during solidification. With consideration of tip undercooling this modified model can predict exactly degree of microsegregation and eutectic fraction from slow solidification(casting) to fast solidification(welding).

• Journal of Korea Water Resources Association
• /
• v.34 no.5
• /
• pp.567-575
• /
• 2001

A methodology is developed for designing the minimum-cost water distribution network. The method is based on network simulations and an optimization scheme using genetic algorithms. Being a stochastic optimization scheme, genetic algorithms have advantages over the conventional search algorithms in solving network problems known for their nonlinearities and herculean computational costs. While existing methods focus on the design of either entirely new or parallel augmentation of network systems, the proposed method can be applied to problems having both new branches of tree-type and paralle augmentation in loops. The applicability of the method was shown through a case study for Baekryeon water supply system. The optimized design resulted in the maximum 5.37% savings compared to the conventional design without optimization, while meeting the hydraulic constraints.

• The Korean Journal of Food And Nutrition
• /
• v.19 no.3
• /
• pp.267-270
• /
• 2006

In Korea, for a long time Rhus verniciflua has traditionally been used as an herbal medicines plants. A stem of Rhus verniciflua has been used to treat gastrointestinal trouble with in form of boiled chicken as a folk medicine. But it has been recognized as an extremely active allergen causing skin reactions. The chief allergenic component, urushiol, is found within the oleoresinous sap of Rhus verniciflua. Most components of urushiol have unsaturated side chains. These unsaturated side chains of urushiol are important to polymerization of these natural products. The urushiol components in Korean lacquer were isolated by reversed phase HPLC. The molecular weight of purified urushiol was determined as 340 from mass analysis. This compound was identified as Heptadecatetraenyl catechol (MW 340).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.6
• /
• pp.533-538
• /
• 2004

Recently, it is increasing the concern of distributed generations(DGs) that installed small power at a site near by the customer. In deregulation environment, not only distributed generation operation but also state estimation is the key function in distribution systems. This paper process to calculate the impact of distributed generation on a distribution feeder. WLAV state estimation is performed the distribution systems with DGs and bad data test including single, multiple, interacting. Simulations with test cases are performed and the results are presented, using IEEE 34 bus radial distribution systems

• Journal of the Korean institute of surface engineering
• /
• v.49 no.5
• /
• pp.416-422
• /
• 2016

We have investigated the effects of applied potential, deposition time and electrolyte types on shapes and physical properties of Cu dendrites by potentiostatic electrodeposition. Finer shape of dendrites was observed at less cathodic potential by 100mV than at the limiting current, due to 'effective overpotential'. The shape of copper dendrite is related to the deposition time, too. The dendrite depositing for 10 min showed the finest shape. The finer dendrite has the less apparent density and the larger specific surface area. Dendrite from chloride solution has the lowest density and the largest surface area among three plating solutions, sulfate, chloride and pyrophosphate.

• Journal of Korea Foundry Society
• /
• v.19 no.1
• /
• pp.54-65
• /
• 1999

The present work is an attempt to evaluate the relationship between dendrite arm spacing and average cooling rate in gasatomized $Al_{87.3}misch$ $metal_{8.3}Ni_{4.4}$ powder by means of the following methods. One is calculation of heat transfer coefficient and average cooling rate, which are derived from estimated particle velocity during gas-atomization. The other is measurement of secondary dendrite arm spacing, which are observed on the particle surface. Then, we make experimental equation for this relationship in case of permanent mold casting and compare it with similar equation in case of rapidly solidified powder. Both average cooling rates and solidification rates are considered to represent the variance of dendrite arm spacings in two types soidification route. Even though there is a considerable difference in each average cooling rate, the dendrite arm spacing values are similar in two cases; particle diameter, $100\;{\mu}m$, and casting width, 2.05 mm. It is because that each solidification route has similar solidification rate.

• The Journal of the Korean bone and joint tumor society
• /
• v.13 no.2
• /
• pp.119-123
• /
• 2007

Giant cell reparative granuloma (GCRG) is an uncommon benign lesion that is most commonly found in the mandible and maxialla, and is a very rare condition in finger. We report an unusual case of GCRG arising in the index finger of a 21-year-old man. Histology was characteristic of giant cell reparative granuloma.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.5
• /
• pp.207-215
• /
• 2010

This study was carried out for the purpose of obtaining the basic data for identifying the origin of amethyst. For this, the three dimensional shapes of inclusions contained in various amethyst were observed with Stereo Zoom microscope. The shape and chemical composition of cross section of solid inclusion and the chemical composition of evaporite were investigated by SEM-EDS. The evaporite is made from evaporating of liquid inclusion which is flowed out of amethyst sample by decompressing. Lastly, The trace mineral composition of amethyst was investigated by ICP-AES after digesting the amethyst sample with HF-$H_2SO_4$ solution.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.25 no.2
• /
• pp.45-57
• /
• 1999

Melanocytes, derived from neural crest, make melanin and protect skin from the hazardous ultraviolet light. Melanocytes with dendritic process has similar morphology with neurogenic cells and share growth factor receptors such as neurotrophin receptors. Melanogenesis can be regulated by ultraviolet light and inflammation of the skin. In addition, several factors such as hormone, cytokines, arachidonic acid can affect the proliferation and melanogenesis of melanocytes. For melanogenesis, melanocytes need expression of various genes including tyrosinase, TRP-1, TRP-2. In addition, melanin need to be transferred from melanocytes to surrounding keratinocytes. The biology of melanocytes is complex and mechanism of melanocytes proliferation and melanogenesis is still under the investigation.