• Journal of Chest Surgery
• /
• v.43 no.5
• /
• pp.499-505
• /
• 2010

Background: There have been several reports using animal experiments that CD1-restricted T-cells have a key role in tumor immunity. To address this issue, we studied the expression of markers for CD1c+ myeloid dendritic cells (DCs) isolated from peripheral blood in the clinical setting. Material and Method: A total of 24 patients with radiologically suspected or histologically confirmed lung cancer who underwent pulmonary resection were enrolled in this study. The patients were divided according to histology findings into three groups: primary adenocarcinoma of lung (PACL), primary squamous cell carcinoma of lung (PSqCL) and benign lung disease (BLD). We obtained 20 mL of peripheral venous blood from patients using heparin-coated syringes. Using flow-cytometry after labeling with monoclonal antibodies, data acquisition and analysis were done. Result: The ratio of CD1c+CD19- dendritic cells to CD1c+ dendritic cells were not significantly different between the three groups. CD40 (p=0.171), CD86 (p=0.037) and HLA-DR (p=0.036) were less expressed in the PACL than the BLD group. Expression of CD40 (p=0.319), CD86 (p=0.036) and HLA-DR (p=0.085) were less expressed in the PACL than the PSqCL group, but the differences were only significant for CD86. Expression of co-stimulatory markers was not different between the PSqCL and BLD groups. Expression of markers for activated DCs were dramatically lower in the PACL group than in groups with other histology (CD40 (p=0.005), CD86 (p=0.013) HLA-DR (p=0.004). Conclusion: These results suggest the possibility that CD1c+ myeloid DCs participate in control of the tumor immunity system and that low expression of markers results in lack of an immune response triggered by dendritic cells in adenocarcinoma of the lung.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.1
• /
• pp.9-17
• /
• 2010

The LCC (Liquid Cadmium Cathode) structure to be developed for inhibiting the formation and growth of the uranium dendrite has been known as a key part in the electrowinning process for the simultaneous recovering of uranium and TRU (TRans Uranium) elements from spent fuels. A zinc-gallium (Zn-Ga) experimental system which is able to be functional in aqueous condition and normal temperature has been set up to observe the formation and growth phenomena of the metal dendrites on liquid cathode. The growth of the zinc dendrites on the gallium cathode and the performance of the existing stirrer type and pounder type cathode structure were observed. Although the mechanical strength of the dendrites appeared to be weak in the electrolyte and easily crashed by the various cathode structures, it was difficult to effectively submerge the dendrite into the bottom of the liquid cathode. Based on the results of the aqueous phase experiments, a lab-scale electrowinning experimental apparatus which are applicable to the development of LCC srtucture for the electrowinning process was established and the performance tests of the different types of LCC structure were conducted to prohibit the uranium dendrite growth on LCC surface. The experimental results of the stirrer type LCC structures have shown that they could not effectively remove the uranium dendrites growing at the inner side of the LCC crucible and the performances of the paddle and harrow type LCC structure were similar. Therefore a mesh type LCC structure was developed to push down the uranium dendrites to the bottom of the LCC crucible growing on the LCC surface and at the inner side of the crucible. From the experimental results for the performance test of the mesh type LCC structure, the uranium was recovered over 5 wt% in cadmium without the growth of uranium dendrites. After completion of the experiments, solid precipitates of the bottom of the LCC crucible were identified as an intermetallic compound (UCd11) by the chemical analysis.

• The Korean Journal of Rheology
• /
• v.5 no.1
• /
• pp.85-92
• /
• 1993

수지이동 성형공정에서 수지가 섬유직조망에 함침될 때의 투과계수와 수지의 표면 장력으로 인하여 유동진전면에서 발생하는 모세관압을 실험적으로 측정하였다. 두 종류의 섬유조직망에 대해서 가공율이 증가함에 따라투과계수는 증가한다. 수지, 섬유 그리고 공기 가 서로 다른 세 개의 상을 구성함으로써 수지의 표면장력의 영향을 받는 비정상상태의 투 과계수가 수지의 섬유직조망에 포화된 정상상태에서 측정된 투과계수보다 본 실험에서 수행 된 모든 기공을 범위에서 크다는 것을 보여주었다. 수지 유동진전면에서 발생되는 모세관압 은 기공율이 감소함에 따라 증가하였고 섬유직 조망의 기공율이 0.469인 경우에는 금형입구 에서의 수지주입압력의 25%에 해당되는 모세관압이 발생되는 것으로 나타났다. 따라서 모 세관압을 가공조건으로 고려해다 한다는 것을 제시할수 있었다. 또한 본연구에서 사용된 임 의 배향 섬유직조망에 대해 실리콘 오일과 유리섬유 계면의 동적접촉각 측정을 통하여 섬유 배향 및 기공의 분포를 나타내는 형상인자의 값을 구함으로써 실제 RTM 공정에서 발생되 는 모세관압을 예측할 수 dLT는 기초자료를 제시하였다.

• Clinical and Experimental Pediatrics
• /
• v.48 no.7
• /
• pp.779-788
• /
• 2005

Purpose : Echinacea, a traditional plant medicine has been used as immune-stimulant. Recent studies have revealed that extract of Echinacea has immunostimulatory effects on human blood mononuclear cells. This study was designed for the purpose of screening the genes associated with immunologic effects of Echinacea on monocytes and dendritic cells using a cDNA microarray chip. Methods : $CD14^+$ monocyte cells were cultured for one day with Echinacea extract(final concentration : $50{\mu}g/mL$) in experiment 1, but were cultured without Echinacea in experiment 2. The gene expression of these cultured monocytes was analyzed using the cDNA microarray chip. Dendritic cells produced from $CD14^+$ monocyte were cultured for five days with GM-CSF and IL-4, and then cultured for one day with Echinacea in experiment 3, but were done without Echinacea in experiment 4. Results : In experiments 1 and 2, there were 17 significantly expressed genes with average expression ratios above 2.5, including interferon gamma-inducible protein 30(IFI 30), CDC(cell-division-cylcle)-like kinase 2(CLK 2), syndecan binding protein(syntenin), superoxide dismutase 2, etc. In experiments 3 and 4, there were 24 gene, with significantly expressed genes were 24 genes, which were insulin-like growth factor 2(somatomedin A), methyl-CpG binding domain protein 3, IFI 30, small inducible cytokine subfamily A, member 22, etc. The genes encoding CD44, IFI 30, mannose receptor C type 1(MRC 1), chemokine receptor 7(CCR 7), CLK 2, syntenin and cytochrome C oxidase subunit VIII were significantly expressed in both monocytes and dendritic cells cultured with Echinacea. Conclusion : This study employed a cDNA microarray chip to elicit the immune-associated gene profile; the expression was enhanced by Echinacea in CD14+ monocytes and dendritic cells. Thus we laid the basis for the quantitative and functional analysis of genes induced by Echinacea in monocytes and monocyte-derived dendritic cells.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.1
• /
• pp.80-87
• /
• 2004

This study was carried out to improve the properties of powdered tannin adhesive(PT) by adding liquid tannin resin(LT) to PT in the manufacture of particleboard. Mixing the LT to PT from 50% to 100% by weight did not show any difference in particleboard properties, but the higher the powdered tannin resin ratio, the lower the properties of the board. The proper ratio of PT to LT was 30:70 for the improvement of PT-particleboard, unless LT lower than 70%. Internal bonding strength was in proportional to the amount of LT. Mixing amino adhesives and PT did not show any improvements in mechanical and physical properties of the board but they only acted as scavenger for the free formaldehyde.Manufacturing particle board with the adhesive of 30:70 (PT:LT) and by using double blender resulted in high-performance products of E₀ level of formaldehyde emission with high water resistance (U type; below 12%, M type; below 25%), as well as saving chip drying energy.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2008.05a
• /
• pp.247-248
• /
• 2008

• The Journal of Korean Academy of Prosthodontics
• /
• v.25 no.1
• /
• pp.281-302
• /
• 1987

의치상 재료 종류에 따라 의치, 점막 및 하악골에 발생되는 변위 및 응력을 연구하기 위하여 컴퓨터를 이용한 수치적 해석인 2차원 유한 요소법을 이용하였다. 2차원 유한 요소 모형으로선 표준 크기의 하악골 및 의치를 고려하여 231개의 사변형 요소 및 268개의 절점으로 분할한 후 각 구성 성분의 물리적 성질인 탄성률 및 프와송비를 대입시켰다. 사용된 의치로서는 일반 합성수지의치, 2mm후경의 탄성재를 의치상 하부에 이장한 합성수지의치, 2mm후경의 탄성재를 치아와 의치상 중앙에 삽입한 합성수지의치 및 0.5mm후경의 금속상의치의 4종류였으며, 하중시에 하악의 고정 부위로선 생체와 동일 조건을 부여하기 위하여 교근, 내측익돌근, 측두근등의 하악 폐구근이 부착되는 하악각 부위 및 하악 근돌기 부위의 16절점을 고정점으로 하였다. 하중 조건으로선 하악 제1대구치의 일점에 10kg의 수직 집중하중, 하악 중절치의 일점에 7kg의 수직 집중하중 및 하악 제 1소구치로 부터 하악 제2대구치까지의 교합면에 10kg의 수직 분산하중을 부여하여 분석한 결과는 다음과 같다. 1. 하중이 의치 교합면위의 가해진 부위에 따라 다양한 의치 회전 및 강하 현상을 보였으며, 탄성재를 이장 및 삽입한 합성 수지 의치의 변위가 일반 합성수지의치 및 금속상 의치의 변위보다 더 컸다. 2. 주응력을 고려할때 점막 부위에는 주로 압축 응력이 작용하였으며 치조제 부위는 압축응력과 인장 응력이 함께 작용하였다. 3. 탄성재를 삽입한 합성수지의치에 최고 등가 응력이 집중되었으며 그 다음은 탄성재를 이장한 합성수지의치, 일반 합성수지의치의 순이였으며 금속상의 경우는 금속을 따라서 높은 등가 응력이 넓게 분산되었다. 4. 의치상 종류에 관계없이 동일 하중 조건하에선 점막에 나타나는 등가 응력의 크기 및 분산양태는 유사하였다. 5. 하악골에서 등가 응력은 의치지지 부위에만 국한되지 않고 넓게 분산 되었으며 의치상 종류 및 하중 조건에 관계없이 치조제 후방 및 하악연의 후방 부위에 특히 높은 등가응력이 집중되었다. 6. 하악 중절치의 일점에 수직 하중을 가한 경우가 다른 하중 조건에 비하여 지지점과의 거리차이로 인하여 하악골에 가장 높은 등가 응력을 유발하였다. 7. 의치상 재료에 따른 하악 골에 발생되는 응력의 크기 및 분산에는 큰 차이가 없으나 금속상의 경우가 교합압을 분산하는데는 효과적이었다.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.4
• /
• pp.354-358
• /
• 2020

Lipoma arborescens (LA) is a rare lesion that causes joint effusion and pain. LA usually presents as a unilateral knee lesion, and bilateral lesions are extremely rare. LA among adolescent patients is also extremely rare with the disorder having a much higher incidence among adults. This paper reports a 14-year-old boy who was treated for bilateral knee LA. X-rays revealed the characteristic features of LA in both knees, and arthroscopic synovectomy was performed to resect the lesions. Postoperative recovery progressed smoothly, and the patient was eventually relieved of pain and swelling. LA should be considered when adolescent patients present with bilateral pain and swelling, even though this condition is rare in this age group. Furthermore, surgical synovectomy for a complete resection is an appropriate treatment option.

• Journal of Korea Foundry Society
• /
• v.42 no.3
• /
• pp.153-160
• /
• 2022

The effect of thickness on the microstructure and the mechanical properties of centrifugal cast 625 was investigated. Centrifugal cast 625 with various thickness of 10, 17 and 50mm showed partially columnar grained structure 8, 12.3 and 18.5mm respectively from the outer surface. Secondary dendrite arm spacing in the columnar grains slightly increased with increasing casting thickness. Tensile strength of the columnar region was similar regardless of casting thickness. Solidification behavior of the columnar grained region is similar to that of directional solidification, thus solidification rate in the centrifugal cast tube was extrapolated from the secondary dendrite arm spacing data of the directionally solidified material. The equiax grained region formed interior of the thick castings. The tensile strength of the equiaxed region showed the average value of the columnar region which is presumably originated from the grain structure rather than secondary dendrite arm spacing.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.3
• /
• pp.199-206
• /
• 2013

Electrowinning process in pyroprocessing recovers U (uranium) and TRU (Trans Uranium) elements simultaneously from spent fuels using a liquid cadmium cathode (LCC). When the solubility limit of U deposits over 2.35wt% in Cd, U dendrites were formed on the LCC surface during the electrodeposition at $500^{\circ}C$. Due to the high surface area of dendritic U, the deposits were not submerged into the liquid cadmium pool but grow out of the LCC crucible. Since the U dendrites act as a solid cathode, it prevents the co-deposition of U and TRUs. In this study, the electrodeposition of U onto a LCC was carried out at 440 and $500^{\circ}C$ to compare the morphology and component of U deposits. The U deposits at $440^{\circ}C$ have a specific shape and were stacked regularly at the center of the LCC pool, while the U dendrites (i.e., ${\alpha}$-phase) at $500^{\circ}C$ were grow out of the LCC crucible. Through the microscopic observation and XRD analysis, the electrodeposits at $440^{\circ}C$, which have a round shape, were identified as an intermetallic compound such as $UCd_{11}$. It can be concluded that the LCC electrowinning operation at $440^{\circ}C$ achieves the co-recovery of U and TRU without the formation of U dendrites.