• Applied Chemistry for Engineering
• /
• v.1 no.2
• /
• pp.124-132
• /
• 1990

In order to improve the mechanical properties and fracture toughness of HPT 1071/DDS system, poly(aryl etherimide) (PEI) was incorporated in the resin system. In HPT 1071/DDS system, mechanical properties of cured epoxy resins were not strongly dependent on the concentration of DDS curing agent strongly. In the case of HPT 1071/DDS/PEI system, the fracture toughness and flexural properties of epoxy resins increased with increasing the concentration of PEI. SEM micrographs of cured epoxy resin indicated that the phase separation occured at the low concentration of PEI in this system. In addition, investigation of the relationship between mechanical properties and the morphology of modified epoxy resin was undertaken in HPT 1071/DDS/PEI system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.2
• /
• pp.141-147
• /
• 2014

A nondestructive ultrasonic technique was applied to evaluate the thermal characteristics and degradation of synthetic polymer resin (plastics) with better cost-effectiveness and functionality than glass and metal. Thermoplastic and transparent acrylic resin (PMMA) specimens were annealed at below the glass transition temperature ($T_g$), and the propagation characteristics (attenuation and velocity) were measured. The attenuation increased and the velocity decreased with thermal degradation. The results showed that the thermal aging of the specimens could be evaluated quantitatively and that the Tg could be evaluated qualitatively.

• Korean Journal of Clinical Laboratory Science
• /
• v.54 no.1
• /
• pp.38-48
• /
• 2022

Carcinoembryonic antigen (CEA) is an oncofetal antigen primarily detected in the peripheral blood of cancer patients, particularly in those with colorectal cancer. CEA is considered a valuable target for antigen-specific immunotherapy. In this study, we induced the anti-tumor immunity for CEA through the administration of a dendritic cell (DC) vaccine. However, there was a limitation in inducing tumor regression in the DC vaccinated mice. To enhance the efficacy of anti-tumor immunity in MC38/CEA2 tumor-bearing mice, we evaluated the effects of DC vaccine in combination with cyclophosphamide (CYP). Administration of CYP 100 mg/kg in mice resulted in significant inhibition of tumor growth in the 2-day tumor model, whereas a lower inhibition of tumor growth was seen in the 10-day tumor model. Therefore, the 10-day tumor model was selected for testing chemo-immunotherapy. The combined CYP and DC vaccine not only increased tumor antigen-specific immune responses but also induced synergistic anti-tumor immunity. Furthermore, the adverse effects of CYP such as weight loss and immunosuppression by regulatory T cells and myeloid-derived suppressor cells showed a significant reduction in the combined chemo-immunotherapy treatment compared with CYP alone. Our data suggest that chemoimmunotherapy with the DC vaccine may offer a new therapeutic strategy to induce a potent anti-tumor effect and reduce the adverse effects of chemotherapy.

• Composites Research
• /
• v.24 no.5
• /
• pp.34-38
• /
• 2011

Carbon nanotubes (CNTs) have been widely investigated as reinforcements of CNT/polymer nanocomposites to enhance mechanical and electrical properties of polymer matrices since their discovery in the early 90's. Furthermore, the number of studies about incorporating CNTs into carbon fiber reinforced plastics (CFRP) to reinforce their polymer matrices is increasing recently. In this study, single-walled carbon nanotubes (SWNT) were dispersed in epoxy with 0.2 wt.% and 0.5 wt.%. Then, the SWNT/epoxy mixtures were processed to carbon fiber composites by a vacuum assisted resin transfer molding (VARTM) and a wet lay up method. The processed composite samples were tested for the interlaminar shear strength (ILSS). The relationship between the interlaminar shear strengths and processing, and the reinforcement mechanism of carbon nanotubes were investigated. CNT/epoxy nanocomposite specimens showed the increased tensile properties. However, the ILSS of carbon fiber composites was not enhanced by reinforcing the matrix with CNTs because of processing issues caused by increased viscosity of the matrix due to addition of CNTs particularly for a VARTM method.

• Applied Chemistry for Engineering
• /
• v.19 no.5
• /
• pp.547-553
• /
• 2008

To achieve the ideal performances of paint film, resins and hardeners have to be chosen and designed in a proper way depending on the exposure circumstance of substrate and the requested physical properties. Six different kinds of clear paints were made in this experiment using alkyd polyol, polyester polyol, polyester modified acrylic polyol and another 3 acrylic polyol resins whose $T_g$ and OH value were partially modified. Then the tests for chemical, physical, and mechanical properties were measured after forming the paint films using aliphatic and aromatic polyisocyanate. The viscosity and elasticity of paint film were then measured in terms of gel point and $tan{\delta}$ using Rheometer and DMA. Through this viscoelastic characteristic test of polyurethane resin, we were able to choose the adequate resins and hardeners which are the most important in the top and primer painting system of urethane paint and, as a result of observing the physical, mechanical, and chemical properties of paint film by urethane, we have finally reached the conclusion that we could apply the proper polyol to top and primer paint for developing the polyurethane paint system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.213-213
• /
• 2015

밭에서의 점적 관개를 이용한 노지 재배의 경우 적정 관개 계획 수립을 위해서는 작물 및 토양의 수분 정보에 대한 정확한 파악이 필요하다. 본 연구에서는 밭 토양을 GIS(Geographic Information System)를 통해 격자 형태로 분할하여 작물의 증발산량 및 토양의 수분함량을 모의할 수 있는 격자 기반 토양 물수지 모형을 개발하였다. 본 모형을 통해 작물의 소비수량 및 필요 수량을 파악함으로써 작부기간 중 필요한 관개수량을 제시하는 것이 가능하다. 고도화 기상자료로는 국가농림기상센터에서 운영 중인 고해상도 WRF(Weather Research and Forecasting) 모형에서 생산된 격자 형태의 복사, 온도, 바람, 강수 자료를 사용하였고 고도화 기상자료의 격자 해상도 별로 모의되는 작물 및 토양의 수분 정보 간 비교 및 분석을 실시하였다. 토양 물수지 모형에 입력되는 격자형태의 자료로는 기상, 토성 및 토지이용 자료가 있으며 기상자료의 경우 가로 및 세로의 크기가 각 270, 810, 2430m로 동일한 3가지 경우로 나누어 적용했으며 토성 및 토지이용 자료의 경우 기상 격자의 최소 크기에 맞춰 가로 및 세로의 크기가 각 270m인 격자로 분할하였다. 이와 같은 과정에 의한 모의 결과 각 격자별 작물 증발산량, 토양수분함량 및 관개수량의 일 연별 시계열 자료를 얻을 수 있으며 동시간대 격자별 수문인자 값을 산정하고 위치에 따른 공간적 상호 상관성을 분석하였다. 결과적으로, 고도화 기상자료의 격자 크기에 따른 밭 토양 물수지 분석 결과를 통해 고도화 기상 격자의 규모별 밭 토양 물수지 분석 효용성을 파악하고자 하였다. 더불어, 시험 지역(Test Bed) 선정을 통해 토양수분 및 증발산량을 실측하고 본 모형의 모의 결과와 비교함으로써 검정하는 것을 향후 연구 계획으로 한다.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.493-502
• /
• 2018

Currently, the fabrication of a high-tin bronze spoon by traditional manufacturing techniques involves 10 steps in the bronze ware workshop. Hot forging has a major influence on manufacturing and involves two to three steps. The dendritic ${\alpha}$-phase in the microstructure of the high-tin bronze spoon is refined and finely dispersed through hot forging. In addition, twinning is observed in the ${\alpha}$-phase of the hammered part, and the ${\alpha}$-phase microstructure gradually transform from a polygon to a circular shape due to hammering. In this process, the adjacent ${\alpha}$-phases overlap with each other and remain combined after quenching. The microstructure with the overlapping is also observed in bronze artifacts, and this shows the correlation with technical system. The results of the experimental hot forging of Cu-22%Sn alloys show that the decrease in in the amount of the dendritic microstructure, which forms during casting, is in proportion to the number of processing steps and that the refined grain obtained by hammering contributes to the improvement in the strength of the material. From the hammering marks, which are observed on both the bronze artifact excavated from archaeological sites and on the high-tin bronze spoon produced in the traditional workshop, it is presumed that the knowledge regarding the unrecorded manufacturing system of bronze ware in ancient times has been passed down in a traditional way up to the system used currently.

• Journal of Sericultural and Entomological Science
• /
• v.26 no.2
• /
• pp.16-25
• /
• 1984

The sericin fixation of silk fabrics by epoxy resins was studied in the presence of aqueous salt solution in different solvents at the indicated temperature for the desired time. Heavy weight gains were obtained in the reaction with glycerol diglycidyl ether (EX-313) and ethylene glycol diglycidyl ether (EX-810) catalyzed by potassium thiocyanate in such solvents as carbon tetrachloride and p-chloroethylene. The obtained results were summarized as follows; 1) The tested resins were found similar in reaction behavior to silk fabric. The effect of fixation and weight gains was higher in EX-810 than EX-313. 2) The weight gains were increased with reaction time and temperature, and degumming ratio reached a constant value in 90 min at 70$^{\circ}C$. 3) The weight gains and the degumming ratio reached an equilibrium at 3-5% of epoxy concentration. 4) The weight gains were remarkably influenced and increased by the concentration of salt solution. The degumming ratio reached an equilibrium over 0.5N concentration of salt. 5) The weight gains were increased with the dipping time in gently-sloping. The degumming ratio reached an equilibrium over 15 min dipping. 6) The effect of sericin fixation of hydrophobic solvents, such as Carbon Tetrachloride, p-Chloroeth-ylene, Cyclohexane, Xylene and Toluene, was found suitable. 7) The effect of drying temperature was not remarkable on the weight gains and the degumming ratio. 8) There was a slight decrease in the moisture regain of sericin-fixed silk and it may be possible to maintain the moisture regain in the sericin-fixed silk by the epoxy resins. 9) The results on testing physical properties of sericin-fixed silk fabric were as follows; The crease recovery was almost not different from undegummed fabric, but inferior to degummed fabric. The tensile strength was improving in accordance with the effect of sericin fixation, either the elongation did.

• The Korean Journal of Rheology
• /
• v.10 no.4
• /
• pp.185-194
• /
• 1998

Flow-induced voids during resin impregnation and poor fiber wetting give serious effects on the mechanical properties of composites in resin transfer molding process. In order to better understand the characteristics of resin flow and to investigate the mechanism of void formation, flow visualization experiment for the resin impregnation was carried out on plain weaving glass fiber mats using silicon oils with various viscosity values. The permeability and the capillary pressure for the fiber mats of different porosities were obtained by measuring the penetration length of the resin with time and with various injection pressure. At low porosity and low operating pressure, the capillary pressure played a significant role in impregnation process. Video-assisted microscopy was used in taking the magnified photograph of the flow front of the resin to investigate the effect of the capillary pressure on the void formation. The results showed that the voids were formed easily when the capillary pressure was relatively high. No voids were detected above the critical capillary number of 2.75$\times$$10^{-3}, and below the critical number the void content increased exponentially with decrease of the capillary number. The content of void formed was independent of the viscosity of the resin. For a given capillary number, the void content reduced with the lower porosity of the fiber mat.

• Proceedings of the Korean Society of Organic Agriculture Conference
• /
• 2009.12a
• /
• pp.307-307
• /
• 2009

우리나라에서 농가단위 경축순환농업 모델에 대한 조사와 농장내 순환구조에서 양분수지를 조사한 사례도는 미미한 실정이다. 이에 경축연계 자원순환 유기농업농가의 실천사례 발굴하고, 실천모델별 축산형태 및 경종형태를 조사하여 경종부분의 양분순환과 양분수지를 조사하고자 하였다. 발굴된 농가단위 경축순환농업 사례는 3가지 형태로 모두 한우를 11~21두 범위에서 사육하는 동시에 $15,510m^2$의 밭농사를 수행하는 농가, $8,019m^2$의 밭농사와 $8,250m^2$ 논농사를 동시에 수행하는 농가, $26,400m^2$의 논농사만 수행하는 농가들이었다. 각 모델에서 배합사료는 모두 외부에서 구입하고 있었으며 조사료의 자급율은 25 ~ 100%인 것으로 조사되었다. 특히, 한우 20두와 논농사 $26,400m^2$를 경영하는 농가에서 조사료(볏짚)의 100%를 자급하였고 동시에 한우사육과정에서 발생한 자급퇴비를 전량 논농사에 사용하여 유기농 벼농사를 유지하고 있었다. 밭농사를 함께 수행하는 농가에서는 자급퇴비 외에 외부로부터 유박비료 및 발효유기질비료를 구입하여 양분을 충당하고 있었다. 각 농가의 토양이화학성을 분석한 결과 pH는 5.49~7.61, 유기물 함량은 1.37~1.40%, 유효인산 함량 253.32~329.63 mg/kg, 칼륨 0.24~0.3, 칼슘 3.97~10.1, 마그네슘 0.89~1.77 $Cmol^+$/kg, CEC는 7.92~11 $Cmol^+$/kg 이었므며 토양내 잔류농약은 검출되지 않았다. 농가별로 발생한 우분퇴비의 성분 분석결과는 전질소 0.68 ~ 0.73%, 전인산 0.68 ~ 0.86%, 칼륨 0.70~0.78% 수준이었다. 각 사례농가별 투입한 실제시비량, 토양분석결과와 사용된 자재의 성분 분석결과를 이용한 시비처방법에 따른 시비량 및 표준시비법에 따른 시비량을 산출하여 3요소의 양분수지를 계산하였다. 이와 함께 유기질비료의 무기화율을 감안한 시비량도 산출하였다. 양분수지를 분석한 결과 3농가 모두 실제시비량은 3요소 모두 초과 되는 것으로 나타났으며, 특히 인산과 칼륨이 2배정도 초과되는 경향을 보였다. 그러나 투입된 자급퇴비 및 유기질비료의 무기화율을 감안한 시비량으로 환산할 경우에는 질소성분이 3농가 모두 부족한 것으로 산출되었으며, 인산과 가리 성분은 충분하거나 초과되는 것으로 계산되었다. 농장내 축산경영을 통해 발생하는 자급퇴비만을 이용할 경우에 경종부문의 양분수지를 산출한 결과를 보면 실제시비량 기준으로 질소는 56~186%, 인산은 90~346%, 칼륨은41~221%로 양분수지가 달라졌으며, 무기화를 감안한 기준으로는 질소는 16~53%, 인산은 52~197%, 칼륨은 41~221%로 양분수지가 달라졌다. 소규모 유기농가단위 경축연계 자원순환 모델 연구를 통해 유기경종농업이 유지될 수 있으나, 3요소별 양분수지의 불균형이 발생할 수 있는 것으로 조사되었으며, 유기질비료의 특성상 무기화율을 감안한 시비량을 적용할 경우에는 질소 성분의 부족과 동시에 인산, 칼륨 성분의 과다가 예측되었다. 따라서 이러한 성분의 불균형을 조정할 시비체계 연구가 필요한 것으로 판단되었다. 본 연구는 농촌진흥청의 "유기가축사양 및 유기 순환체계모델" 연구사업의 세부과제로 수행한 1년차 결과입니다.