• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.107-112
• /
• 1992

선박 내부에 탑재된 추진 기계류에서 발생되는 진동은 마운트 Deck을 통하 여 선체에 전달되어 수중으로 전파된다. 기계류에 의해 발생되는 수중방사소 음을 감소시키기 위해서는 선체로 전달된 진동수준 및 수중방사소음 예측이 우선 중요하다. 수중방사소음 예측 방법으로 FEM과 BEM에 의한 저주파수 대역 예측, 전달함수에 의한 실험적 예측, SEA(Statistical Energy Analysis) 기법을 이용한 고주파수 대역 예측으로 나눌 수 있다. R.H.Lyon 등에 의해 발전된 SEA 기법은 항공기, 선박등 복잡한 구조물의 고주파수 대역 진동해 석에 널리 이용되고 있다. SEA 기법의 선박에 대한 적용은 소형선박의 기계 류에서 발생되는 진동에 의한 선체 진동수준 및 수중방사소음 해석 등에 적 용되고 있다. 본 연구에서는 보강 원통형 셀 모델에 대한 수중방사소음을 SEA 기법을 이용하여 예측하고 실험을 통하여 검증하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.314-319
• /
• 2021

The measurement of the Underwater Radiated Noise (URN) for the underwater vehicle should consider both the acoustic interference due to the surface reflection and the calculation of the Closet Point of Approach (CPA). In this paper, I tried to analyze the underwater vehicle's URN using the Lloyd's mirror effect. First, the theoretical Lloyd's mirror pattern was compared with the sea trial result, and the sea trial results corresponded well with the theoretical predicted pattern. And then the CPA distance could be estimated by the Lloyd's mirror pattern. As a results, acoustic source level shows the spectral fluctuation due to the acoustic interference of the Lloyd's mirror effect.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.7
• /
• pp.789-796
• /
• 2012

Radiated noise analysis from a ship structure is a challenging topic owing to difficulties in the accurate calculation of the fluid-structure interaction as well as owing to a massive degree of freedom of the problem. To reduce the severity of the problem, a new fluid-structure interaction formulation is proposed in this paper. The complex frequency-dependent added mass and damping matrices are calculated using the high-order Burton-Miller boundary integral equation formulation to obtain accurate values over all frequency bands. The calculated fluid-structure interaction effects are added to the structural matrices calculated by commercial finite element software, MSC/NASTRAN. Then, the impedance and underwater radiation noise due to an excitation of structure are calculated. The present formulation is applied to a ship to calculate the underwater radiated noise.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.5
• /
• pp.343-350
• /
• 2015

In this paper, we perform a study on the directionality of broadband ship radiation noise, mainly resulting from propeller cavitation. By examining a few foreign studies for ship radiation noise and domestic data measured in Korean waters, it is reconfirmed that the asymmetric directionality of the ship radiation noise at bow and stern aspect is observed commonly. In order to explore the reason of this asymmetric directionality, a numerical analysis, based on the acoustic boundary element method, is applied into the geometric form equal to the commercial ship used in the domestic experiment. The numerical result demonstrates that the diffraction of the propeller cavitation noise by ship is a primary cause of the bow-stern asymmetry in the directionality of ship radiation noise.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.485-488
• /
• 2012

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.524-532
• /
• 1997

수중음향표적 특히 선박방사소음을 탐지하거나 식별하는 군사적 목적의 수동소나는 수중청음기 배열로 구성되며 각 배열센서에 수신된 신호에 배열 신호처리기술을 적용하여 선박의 거리, 방위 탐지는 물론 선박의 음향적 특징을 식별하는 고도의 음향장치이다. 그러나 이러한 장치운용자의 선박탐지, 식별이나 새로운 수동소나 개발, 나아가 스텔스 능력의 선박 설계를 위해서는 선박방사소음의 측정, 분석 및 예측에 관한 이해가 선행되어야 할 것이다. 본 연구는 대표적인 선박방사소음 측정시스템의 소개, 방사소음발생기구, 측정자료의 분석 및 예측에 관한 기초기술을 연구 분석한 내용이다.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.1
• /
• pp.73-81
• /
• 2019

This paper proposes an acoustical inversion method using cepstrum analysis of underwater ship noise. Through the cepstrum analysis, multipath structure can be extracted from the recorded ship noise. The multipath structure comes from interferences between a direct arrival and multiple reflections from the sea surface and the bottom. The acoustic inversion is the optimization process to find the best parameters which show good correlation between cepstrums of the measured signal and the replica. The inversion method was applied to the underwater ship radiated noise data measured at Straits of Korea in order to estimate the acoustic center of the ship and the hydrophone position. The inversion results showed good agreement with the measured information.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.349-352
• /
• 2001

본 논문은 수중방사소음을 이용한 선박 클래스 식별을 위하여 비선형매핑법을 제안한다. 수중방사소음으로부터의 특성벡터 추출과정은 신호의 주파수영역 변환, 규준화, 및 특성추출 과정들을 포함하며, 비선형매핑법은 이러한 과정을 통하여 추출된 특성벡터를 입력으로 선박의 클래스를 분류한다. 제안된 비선형매핑법은 인공적으로 생성한 데이터들을 이용한 시뮬레이션을 통해 검증되고, 실제 데이터를 이용한 테스트 결과들은 본 논문에서 제시한 방법이 식별을 위해 사용될 수 있음을 보여준다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.5
• /
• pp.394-400
• /
• 2013

Underwater radiated noise is one of the important performances related to stealth of the naval vessel. However, the evaluation can't be performed frequently due to the cost. Therefore, the estimation method of the underwater radiated noise with average hull vibration is suggested in this paper assuming that the hull of the ship is infinite plate which consists of various unit plates. Through the experiment, the estimated noise is verified from the comparison to the measured data. In addition the difference of underwater radiated noise according to the operating equipments is estimated with measured vibration velocity.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.557-559
• /
• 2012