• Journal of the Korea Society for Simulation
• /
• v.21 no.1
• /
• pp.35-43
• /
• 2012

In this study, underwater behaviors of negative buoyant body and positive buoyant body, which are ejected from a platform, are compared through eject test and simulation. CFD(Computational Fluid Dynamics) method is used to calculate the hydrodynamic derivatives of negative buoyant body with varied hull. Hydrodynamic derivatives that cannot be calculated with CFD are used with the same values of base shape. The pitch angles of test data are much bigger than those of simulated data, and the reason is supposed to be the trailing air effect. A more accurate simulation is possible via modified force modeling which reflects this phenomenon. The underwater behaviors of positive buoyant body and negative buoyant body are somewhat different with each other at the same eject condition, but it may not be a problem in the view of operation.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.63-69
• /
• 2008

It has an important meaning that the maintenance and management of facility for a onshore construction shall be damaged by oceanic environment. A movement and displacement of these shall be investigated by up-to-date machinery tools like GPS and Lidar and MBES & Gyro. In current a lot of tools and methods for investigation shall be used as a displacement and movement on land mainly. For underwater facility it is very difficult to check because of special conditions below the water surface. In this study, a surveying methods for a movement and displacement of underwater facility as caisson shall be used, i.e. multibeam-echo-sounding system. A possibility as basic data for displacement and environmental monitoring shall be studied by MBES to acquire a caisson's inclination.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.2
• /
• pp.95-104
• /
• 1998

The dynamic behavior of the marine cable is essentially nonlinear and dominated by geometric nonlinearity. Furthermore, fluid drag force makes the problem more complex and difficult. Therefore, it has certain limitations to obtain the dynamic behavior of the marine cable by analytical method. The purpose of this paper is to apply the elastic catenary cable element to the problem of under water cable including the hydrodynamic effects of fluids. The static and dynamic formulations for the three-dimensional elastic catenary coble under water effects are derived and the finite element analysis procedures are presented. In the analysis, the hydrodynamic forces are modeled by modified Morison equation. A comparison of the results obtained using present method with previously published results showed the validity of present method. The dynamic behavior of the marine cable subjected to current is investigated using present method and it can be illustrated that the dynamic behavior of the marine cable subjected to current varies with the incident angle of the current and inclined angle of the cable.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.167-170
• /
• 2004

본 논문에서는 수중익 버블 캐비테이션과 날개 끝 볼텍스 캐비테이션의 거동 및 소음을 Eulerian-Lagrangian 기법을 이용하여 수치적으로 해석하였다. Eulerian-Lagrangian 기법은 캐비테이션 버블이 유동장에 미치는 영향이 거의 없다는 가정하에 유동장과 캐비테이션 거동을 일방으로 연계하여 해석하는 방식이다. 수중익 버블 캐비테이션 해석을 위한 유동장은 비압축성 RAMS 방정식을 해석하여 구하고 날개 끝 볼텍스 캐비테이션 유동장은 일반적 CFD 기법의 큰 수치 소산으로 그 특성이 잘 나타나지 않으므로 Sculley 볼텍스 모델을 이용하여 해석한다. 해석한 유동장 정보를 입력치로 하고 버블의 지배 방정식인 Rayleigh-Plesset 방정식과 Newton의 제2법칙에 근거한 궤적 방정식을 연계하여 캐비테이션의 성장-붕괴와 운동을 예측한다. 계산된 거동 정보를 이용하여 버블 캐비테이션과 날개 끝 볼텍스 캐비테이션의 소음을 예측하였다. 본 연구는 수중 운동체에서 발생하는 캐비테이션의 거동과 소음의 특성을 파악하고 그에 따른 대비책을 마련하는 기본 연구로서 활용할 수 있을 것이다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.5
• /
• pp.369-377
• /
• 2014

In this paper, to recognize the collision behavior between a submerged floating tunnel(SFT) and underwater navigation vessel(UNV), both structures are modeled and analyzed. The SFT of collision point is modeled tubular section using concrete with steel lining. The other part of SFT is modeled elastic beam elements. Mooring lines are modeled as cable elements with tension. The under water navigation vessel is assumed 1800DT submarine and its total mass at collision is obtained with hydrodynamic added mass. The buoyancy force on SFT is included in initial condition using dynamic relaxation method. The buoyancy ratio (B/W) and the collision speed are considered as the collision conditions. As results, energy dissipation is concentrated on the SFT and that of the UNV is minor. Additionally, the collision behaviors are greatly affected by B/W and the tension of mooring lines. Especially, the collision forces are shown different tendency compare to vessel collision force of current design code.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.1
• /
• pp.27-41
• /
• 2023

Submerged floating tunnels must be connected to the ground to connect continents. The displacement imbalance at the shore connection between the underground bored tunnel and submerged floating tunnel can cause stress concentration, accompanying a fracture at the shore connection. The elastic joint has been proposed as a method to relive the stress concentration, however, the effect of the elastic joints on the dynamic behavior should be evaluated. In this study, the submerged floating tunnel and shore connection under dynamic load conditions were simulated through numerical analysis using a numerical model verified through a small-scaled physical model test. The resonant frequency was considered as a dynamic behavioral characteristic of the tunnel under the impact load, and it was confirmed that the stiffness of the elastic joint and the resonant frequency exhibit a power function relationship. When the shore connection is designed with a soft joint, the resonant frequency of the tunnel is reduced, which not only increases the risk of resonance in the marine environment where a dynamic load of low frequency is applied, but also greatly increases the maximum velocity of tunnel when resonance occurs.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.130-133
• /
• 2019

수중(submerged)에 부유(floating)식으로 계류되는 거주목적의 구조체 설계(design basis) 관련 연구로서 계류안정성 모델(수중가옥)을 만들고 거동을 정수압적 유체역학적으로 수치분석한다. 임의 가정한 수중가옥의 1)배수량 규모 2) 함체형상에 따른 환경압 하에서의 계류안정성을 a)부력중심, b)무게중심과 가변하중의 변위에 따른 c)함체 기울기를 MATLAB프로그램을 이용하여 산정한다. 나아가 수중가옥의 동적(hydrodynamic) 계류안정성을 임의 시공 장소인 독도의 기상청 울릉도-독도 부이 최근 관측치를 근거로 OrcaFlex프로그램을 이용하여 분석하므로써 수중가옥의 수중건축 시공간상 계류안정성 설계요건(design basis)을 구체화 한다.

• Journal of Navigation and Port Research
• /
• v.42 no.1
• /
• pp.1-8
• /
• 2018

This study covers the selection of systems measuring the behaviour of the slender structure in the underwater environment and its performance assessment. From a comparison of an instrumentation system that can measure the continuous behaviour along the entire length of the slender structure, the underwater camera system is finally selected as the most appropriate semi-permanent measurement system for Deep-sea Ocean Engineering Basin of KRISO. An experiment on the rigid pipes for a basic performance evaluation of the underwater camera is conducted in this study. The motion of a top excited rigid pipe is measured with the utilization of the underwater camera system. The performance of the underwater camera is evaluated by comparing the movement of a pipe measured by the underwater camera with the measured input signals. Through the top excitation experiment for the slender structure, the real-time three-dimensional measurement of the underwater camera system is qualitatively evaluated in this case. The developed underwater camera system can apply to the system to measure dynamic behaviour of a slender structure and mooring line in Deep Ocean Engineering Basin.

• Explosives and Blasting
• /
• v.35 no.3
• /
• pp.21-30
• /
• 2017

When explosives explode in water, the effect of post-explosion gas after explosion should be considered, unlike explosion in the air. During explosion in water, the propagation velocity of the explosion pressure is faster than when the explosion occurs in the air. The generated gas is diffused and trapped in the form of bubbles by water before the energy is dissipated. At this time, the bubble expands and contracts, creating a shock wave. In order to investigate this series of phenomena, a cylinder type steel water tank capable of observing the interior was fabricated and explosion experiments were conducted. In this study, a small amount of shell-free pentolite was exploded in water. Experiments were performed to observe the behavior of the generated gas bubble as well as to measure the shock wave generated. We designed the experimental method of underwater explosion and examined the results.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.447-450
• /
• 2004

선박에서 발생하는 소음 가운데 수중 추진기 소음은 가장 우세한 소음이다. 추진기 소음은 소나에 의해 적을 탐지하는 군용 선박에 경우 생존과 직결된 문제가 되며 쾌적함과 정숙성을 요구하는 여객선의 경우에서도 중요한 문제로 대두되고 있다. 이러한 중요성과 필요성에 따라, 본 연구에서는 수중 추진기의 비공동 및 공동 소음을 수치적으로 해석하였다. 수중 추진기 소음 해석을 위해 유동 해석이 선행되어야 하며 이는 포텐셜을 기반으로 한 패널법을 이용하여 해석한다. 소음 해석은 시간 영역 음향상사법을 이용하였으며, 공동 소음은 홀극 음원으로 모사하여 해석하였다. 또한 향후 수중 추진기의 날개 끝 볼텍스 캐비테이션 해석을 위한 기초연구로서 Eulerian-Lagrangian 접근법을 이용하여 수중익에서의 날개 끝 볼텍스 캐비테이션의 거동과 소음을 예측하였다.