• Horticultural Science & Technology
• /
• v.29 no.4
• /
• pp.298-305
• /
• 2011

This study was conducted to enhance the stem firmness of standard chrysanthemum 'Baekma' bred in Korea for commercial quality improvement and inhibition of stem breaking during transportation through foliar spray with calcium agents. Calcium agent screening 'Baekma' was examined using $CaCl_2{\cdot}2H_2O$, $Ca(NO_3)_2{\cdot}4H_2O$, and OS-Ca (natural liquid calcium compounds extracted from oyster shell) depending on each concentration (0, 0.001, 0.01, 0.1, and 1.0%, respectively). All calcium agents sprayed with 1.0% caused chemical injury such as stem bending or leaf burn. OS-Ca also showed more sensitive response to chemical injury than the other calcium agents because OS-Ca was absorbed very well by 'Baekma' leaves. Maximum stem firmness measured during the final harvest was greater in OS-Ca than in the other calcium agents. Especially, maximum stem firmness was greatest in 0.01% OS-Ca. However, elastic strength and maximum bending stress were greater in 0.001% OS-Ca than in the others. Thus, OS-Ca ranged from 0.005 to 0.05%, which did not show any chemical injury, was finally selected as the first candidate for hardening the stem of 'Baekma'. The next experiment using OS-Ca was conducted with the concentrations of 0, 0.005, 0.01, and 0.05%, respectively. From the results, 0.05% OS-Ca showed better plant growth and parameters such as plant height, stem diameter (upper and middle part), the number of leaves, and dry weights of each part than the other concentrations of OS-Ca and control. As for stem firmness depending on OS-Ca concentration, the Ca content within stem, maximum firmness, elastic strength, and maximum bending stress of stem in 'Baekma' sprayed with 0.05% OS-Ca showed the highest values among all the treatments and it turned out to be very high level of significance between control and OS-Ca treatments. However, the area and percentage of the inside cavity within horizontal stem section in 'Baekma' did not show any significance between any treatments including control. Thus, stem firmness of 'Baekma' did not show any correlation with the inside cavity area of stem. In conclusion, we recommend foliar sprays with 0.05% OS-Ca at vegetative growth stage to enhance stem firmness of 'Baekma' during transportation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.11 no.1
• /
• pp.25-37
• /
• 1978

Since 1976 the catches of sardine increased rapidly in Korea. However due to the poor facilities of preservation, most sardine landed was used only for fish meal as feeds. The aims of this study are to investigate the processing of sardine as a protein. concentrate and to solve related problems under our particular circumstances. Using the ethyl alcohol and isopropyl alcohol, the storage effect for further processing, the optimum processing conditions of sardine protein concentrate and amino acid composition of the product were determined. The utilization of sardine protein ,concentrate as a supplement of bread and noodles was also studied. Chopped sardine meat could be stored in isopropyl and ethyl alcohol without significant deterioration as a raw material for tile further processing. High qualify sardine Protein concentrate could be produced by the method, that is five times five minutes extraction with isopropyl or ethyl alcohol at $80^{\circ}C$ under adequate mixing. In the first step of the extraction, the solvent was added as much as 10 times tile sample amount and the equal volume of additional solvent was also used for the second to fifth step extraction. In the products extracted using isopropyl alcohol and ethyl alcohol, the yields of sardine protein concentrate were $21.2\%$ and $20.3\%$ respectively, and the dry basis contents of protein in the two products were $80.5\%$ and $75.8\%$, the lipid being $0.22\%$ and $0.27\%$ respectively. Isoproyl alcohol was superior to superior alcohol for the extraction of fresh sardine. In amino acid composition of sardine protein concentrate, no difference was found between the products of isopropyl and ethyl alcohol extraction except a little difference in the amount of amino acid between them. In the supplementation of bread and noodles, taste panel showed that supplemented bread and noodles were well accepted when $3\%$ of wheat flour was replaced by sardine protein concentrate.

• The Korean Journal of Mycology
• /
• v.2 no.1
• /
• pp.1-6
• /
• 1974

1. The mycelial growth and sporulation of Mycogone perniciosa was compared on modified Czapek's media deficient in carbon source, nitrogen source, K,Mg, P or the heavy metal elements. The mycelial growth was significantly reduced in solution cultures lacking Mg, K or P and only a trace of growth occurred in solutions lacking carbon source or nitrogen source. Most sparse sporulation and smaller chlamydospores than on any of deficient agar media occurred on agar media dificient in carbon source or nitrogen source. 2. In both potato dextrose agar and malt extract solution, growth of the fungus was optimum at $25^{\circ}C$, and undetectable at $10^{\circ}C$ and $35^{\circ}C$. 3. Optimum pH for growth of this fungus was 7.0. 4. This fungus was killed in soil when exposed to $50^{\circ}C$ or higher for 20 minutes or more.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.1
• /
• pp.16-25
• /
• 1992

A pot experiment was conducted to understand effect of soil temperaute on soybean shoot and root growth, and its relations to nutrient uptake including phosporus and potassium. Pregerminated soybean seedlings, Paldal cultivar, were planted for 43 days on the pots with Ihyeon silt loam and Samgag sandy loam in the temperature controled water baths at 17, 25 and $32^{\circ}C$. Shoot and root samples were taken at four times and analyzed. Shoot and root dry matter weights were heavier as higher soil temperaure. The root dry matter increased faster than shoot at earlier period. Shoot dry matter weights grown at 17 and $25^{\circ}C$ showed little difference between two soils, however, those grown in silt loam at $32^{\circ}C$ were heavier than sandy loam. The total lengths of roots were longer as higher soil temperature, and longer in silt loam than sandy loam. The roots grown in sandy loam at low temperature were thicker than the roots grown in silt loam at high temperature. The uptakes of phosphorus and potassium were higher as higher tempeature with same trend with dry matter. The uptake rate of unit root surface area was higher in sandy loam soil than silt loam. The uptake rates showed strong dependence on soil temperature as well as dependence of water uptake rate. Based on Dalton and Gardner model, at high temperature the dependence trend of phosphorus and potassium on soil temperature showed with active uptake model, while at low temperature the dependence showed without active uptake model.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.535-543
• /
• 2008

Purpose: The objective of this study was to compare the bonding characteristics of a new self-adhesive resin cement to dentin, which does not require bonding and conditioning procedure of the tooth surface, and conventional resin cement. The effect of phosphoric acid etching prior to application of self-adhesive resin cement on the shear bond strength was also evaluated. Material and methods: Fortyfive non-carious human adult molars extracted within 6 months were embedded in chemically cured acrylic resin. The teeth were ground with a series of SiC-papers ending with 800 grit until the flat dentin surfaces of the teeth were exposed. The teeth were randomly divided into 3 experimental groups. In group 1, self-adhesive resin cement, RelyX Unicem (3M ESPE, Seefeld, Germany) was bonded without any conditioning of teeth. In group 2, RelyX Unicem was bonded to teeth after phosphoric acid etching. For group 3, Syntac Primer (Ivoclar Vivadent AG, Schaan, Liechtenstein) was applied to the teeth before Syntac adhesive (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Helibond (Ivoclar Vivadent AG, Schaan, Liechtenstein) followed by conventional resin cement, Variolink II (Ivoclar Vivadent AG, Schaan, Liechtenstein). To make a shear bond strength test model, a plastic tuble (3 mm diameter, 3 mm height) was applied to the dentin surfaces at a right angle and filled it with respective resin cement, and light-polymerized for 40 seconds. All the specimens were stored in distilled water at $37^{\circ}C$ for 24 hours before test. Universal Testing Machine (Z020, Zwick, Ulm, Germany) at a cross head speed of 1 mm/min was used to evaluate the shear bond strength. The failure sites were inspected under a magnifier and Scanning Electron Microscope. The data was analyzed with One way ANOVA and Scheffe test at ${\alpha}$= 0.05. Results: (1) The shear bond strengths to dentin of RelyX Unicem was not significantly different from those of Variolink II/Syntac. (2) Phosphoric acid etching lowered the shear bond strength of RelyX Unicem significantly. (3) Most of RelyX Unicem and Variolink II showed mixed fractures, while all the specimens of RelyX Unicem with phosphoric acid etching demonstrated adhesive failure between dentin and resin cement. Conclusion: Shear bond strength to dentin of self-adhesive resin cement is not significantly different from conventional resin cement, and phosphoric acid etching decrease the shear bond strength to dentin of self-adhesive resin cement.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.4
• /
• pp.317-327
• /
• 1987

As a series of studies on the suitability as a second intermediate host of Clonorchis sinensis, artificial infection experiments were applied to Tilapia mossambica. And then, in order to elucidate the defence mechanism of the fish to Clonorchis, clonorchicidal substance in the epidermal mucus of the fish was isolated by silica gel column and thin layer chromatography and analyzed for its chemical structure by UV, IR and NMR-spectroscopy. The results obtained are summarized as follows: 1. The cercariae which attempted to contact with the fish in the water were observed under stereomicroscope. After contact, the cercariae began to separate their tail from the body after several minutes and then the number increased to $80\%$ more than 10 minutes after the encounter. But very few cercariae could actually invade the epidermis of the fish. 2. The fish were reared with Parafossarulus manchouricus which were shedding numerous cercariae of Clonorchis in the aquarium for 24 hours. Only a few cercariae could invade the epidermis but most of the invaded cercariae died out before forming their cysts. Very few number of the remaining encysted cercariae were also found to be in a state of suspended animation within 42 hours. 3. In the cases of the control fish, Pseudorasbora parva, numerous cercariae of Clonorchis were found to invade the fish through the epidermis under stereomicroscope. Then many metacercariae of Clonorchis were also found in the fish while they were kept in the aquarium. 4. A sample of the epidermal mucus of Tilapia mossambica was extracted with ethly ether 6 times repeatedly. In silica gel column chromatography, using petroleum ether: chloroform/30:70(v/v) as a first solvent and MeOH as a second solvent, the extract was fractionated into the yellow and brownish red solutions in the first solvent and the clonorchicidal brownish yellow solution in the second sovent. 5. The clonorchicidal brownish yellow solution was added to petroleum ether, and the mixture was stored for 5 days at $5^{\circ}C$ and was, then, separated into supernatant fraction and precipitate. Ten mg/ml of the supernatant fraction killed, in vitro, the excysted metacercariae in 45 minutes but the precipitate in 600 minutes. 6. In silica gel column chromatography, using acetone: benzene/10:90(v/v) as a solvent, the more clonorchicidal supernatant fraction was fractionated into the first fraction with Rf. 0.2966 and the second fraction with Rf. 0.072. In vitro, 10mg/ml of the first fraction killed the excysted metacercariae in 28 minutes, the second fraction in 80 minutes and the first fraction was, therefore, determined to be a final clonorchicidal substance. 7. By this purification procedures, the most clonorchicidal substance from the epidermal mucus of Tilapia mossambica was purified 71-folds with $0.2075\%$ yield. Infra red, nuclear magnetic resonance and ultraviolet spectrometric analysis of the purified substance revealed that the substance is linoleic acid. According to the results of the present studies it seemed that this species can not serve as a proper intermediate host of Clonorchis sinensis, and that defence mechanism to the fluke seems to be correlated with linoleic acid in the epidermal mucus of this species.

• Korean Journal of Soil Science and Fertilizer
• /
• v.4 no.1
• /
• pp.13-19
• /
• 1971

In order to establish the method of improving ill drained paddy soil where the accumulation of absorption inhibitor is worried in the earlier stages of rice growth, proper soil is selected and an field experiment is designed having treatments such as lime materials, none sulfate fertilizers, boron and straw etc. The data of yield and plant analysis in different stages of rice growth is eveluated and discussed to obtain following summaries. (1) Significant yield increase was made by the treatment of lime materials such as slacked lime or wollastonite powder, materials inhibiting the activity of microorganisms such as boron and of none sulfate fertilizers lacking inhibitor producing sources. (2) The crop scientifice causes of decreasing yield are the decreasing the number of panicles per hill, grains per panicle and the weight of grains. (3) The plant nutritional causes of decreasing yield are the lowering of nitrogen content throughout the life, phosphate content since young premodia formation stage of plant and the decreased content of magnesium, calcium and silicate in straw at harvesting stage. (4) The causes of lowering the content of various elements in rice plant grown in ill drained paddy soil are suggested as root damage by producing and accumulating absorption inhibitors such as organic acids and hydrogen sulfide etc, from the following observed facts; (a) In young premodia formation stage, attaining to the maximum production and accumulation of absorption inhibitor, the phosphate accumulation in plant was smaller in the phosphate plots than without phosphate plots and much higher in the neutralized plots by adding lime materials. (b) In the plots of straw addition, the potassium content in plant at the young premodia formation stage is very low probabley due to root damage by absorption inhibitor produced from the process of straw decomposition but higher at the stage of harvesting probably due to the immetabolic negative absorption of damaged roots. (c) The effect of boron, known as the inhibitor of microorganism activity to decompose organic matter, is apparent. (d) The effect of nonsulfate fertilizer treatment, having no source of producing inhibitor such as hydrogen sulfide, was significant. (e) All the yield components, decided around the young premodia formation stage attaining to the maximum inhibitor concentration in soil and minimum root activity, are significantly decreased.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.9 no.1
• /
• pp.1-18
• /
• 1973

For regulating the depth of midwater trawl nets towed at the optimum constant speed, the changes in the shape of warps caused by adding a weight on an arbitrary point of the warp of catenary shape is studied. The shape of a warp may be approximated by a catenary. The resultant inferences under this assumption were experimented. Accordingly feasibilities for the application of the result of this study to the midwater trawl nets were also discussed. A series of experiments for basic midwater trawl gear models in water tank and a couple of experiments of a commercial scale gears at sea which involve the properly designed depth control devices having a variable attitude horizontal wing were carried out. The results are summarized as follows: 1. According to the dimension analysis the depth y of a midwater trawl net is introduced by $$y=kLf(\frac{W_r}{R_r},\;\frac{W_o}{R_o},\;\frac{W_n}{R_n})$$) where k is a constant, L the warp length, f the function, and $W_r,\;W_o$ and $W_n$ the apparent weights of warp, otter board and the net, respectively, 2. When a boat is towing a body of apparent weight $W_n$ and its drag $D_n$ by means of a warp whose length L and apparent weight $W_r$ per unit length, the depth y of the body is given by the following equation, provided that the shape of a warp is a catenary and drag of the warp is neglected in comparison with the drag of the body: $$y=\frac{1}{W_r}\{\sqrt{{D_n^2}+{(W_n+W_rL)^2}}-\sqrt{{D_n^2+W_n}^2\}$$ 3. The changes ${\Delta}y$ of the depth of the midwater trawl net caused by changing the warp length or adding a weight ${\Delta}W_n$_n to the net, are given by the following equations: $${\Delta}y{\approx}\frac{W_n+W_{r}L}{\sqrt{D_n^2+(W_n+W_{r}L)^2}}{\Delta}L$$ $${\Delta}y{\approx}\frac{1}{W_r}\{\frac{W_n+W_rL}{\sqrt{D_n^2+(W_n+W_{r}L)^2}}-{\frac{W_n}{\sqrt{D_n^2+W_n^2}}\}{\Delta}W_n$$ 4. A change ${\Delta}y$ of the depth of the midwater trawl net by adding a weight $W_s$ to an arbitrary point of the warp takes an equation of the form $${\Delta}y=\frac{1}{W_r}\{(T_{ur}'-T_{ur})-T_u'-T_u)\}$$ Where $$T_{ur}^l=\sqrt{T_u^2+(W_s+W_{r}L)^2+2T_u(W_s+W_{r}L)sin{\theta}_u$$ $$T_{ur}=\sqrt{T_u^2+(W_{r}L)^2+2T_uW_{r}L\;sin{\theta}_u$$ $$T_{u}^l=\sqrt{T_u^2+W_s^2+2T_uW_{s}\;sin{\theta}_u$$ and $T_u$ represents the tension at the point on the warp, ${\theta}_u$ the angle between the direction of $T_u$ and horizontal axis, $T_u^2$ the tension at that point when a weights $W_s$ adds to the point where $T_u$ is acted on. 5. If otter boards were constructed lighter and adequate weights were added at their bottom to stabilize them, even they were the same shapes as those of bottom trawls, they were definitely applicable to the midwater trawl gears as the result of the experiments. 6. As the results of water tank tests the relationship between net height of H cm velocity of v m/sec, and that between hydrodynamic resistance of R kg and the velocity of a model net as shown in figure 6 are respectively given by $$H=8+\frac{10}{0.4+v}$$ $$R=3+9v^2$$ 7. It was found that the cross-wing type depth control devices were more stable in operation than that of the H-wing type as the results of the experiments at sea. 8. The hydrodynamic resistance of the net gear in midwater trawling is so large, and regarded as nearly the drag, that sweeping depth of the gear was very stable in spite of types of the depth control devices. 9. An area of the horizontal wing of the H-wing type depth control device was $1.2{\times}2.4m^2$. A midwater trawl net of 2 ton hydrodynamic resistance was connected to the devices and towed with the velocity of 2.3 kts. Under these conditions the depth change of about 20m of the trawl net was obtained by controlling an angle or attack of $30^{\circ}$.