• 한국강구조학회 논문집
• /
• 제17권2호통권75호
• /
• pp.243-251
• /
• 2005

용접접합부 균열의 파괴 역학적 해석을 위해서는 용접 중에 발생하는 잔류응력을 고려하여 해석이 수행되어야 한다. 잔류응력이 존재하면 J-적분은 더 이상 적분경로에 관계없이 일정한 값을 갖는 특성을 잃어버리게 된다. 그러므로 용접접합부 균열의 J-적분 해석을 위해서는 잔류응력이 존재하는 경우에도 적분경로에 관계없이 일정한 값을 갖는 새로운 J-적분식이 도입되어야 한다. 따라서 본 연구에서는 기존의 J-적분을 수정하여 잔류응력이 존재하는 경우에 경로 독립성을 유지하는 J-적분을 고찰하고, 이를 이용하여 잔류응력과 외력이 동시에 작용하는 균열선단에서의 J-적분을 해석할 수 있는 프로그램을 개발하였다. 자체개발한 탄소성 해석 프로그램을 이용하여 용접 시 잔류응력과 외력에 대한 응력분포를 계산하였으며, 이를 이용하여 잔류응력과 외력의 복합하중에 대한 J-적분을 계산하였다.

• 한국전산구조공학회논문집
• /
• 제17권4호
• /
• pp.423-431
• /
• 2004

용접접합부 균열의 파괴역학적 해석을 위해서는 용접중에 발생하는 잔류응력해석과 파괴해석이 병행되어야 한다. 잔류응력이 존재하면 J-적분은 더 이상 적분경고에 관계없이 인정한 값을 갖는 특성을 잃어버리게 된다. 또한 균질한 재료와는 달리 이종재료 계면균열에서는 균열선난에서 Mode I과 Mode II의 파괴거동이 동시에 발생한다. 그러므로 이종강재 용접접합부 균열의 J-적분 해석을 위해서는 이종강재 용접시 발생하는 잔류응력이 존재하는 경우에도 적분경로에 관계없이 일정한 값을 갖는 새로운 J-적분식이 도입되어야 한다. 따라서 본 연구에서는 기존의 J-적분을 수정하여, 이종강재 용접시 발생하는 잔류응력이 존재하는 경우에 경로 독립성을 유지하는 J-적분을 고찰하고, 이를 이용하여 잔류응력과 외력이 동시에 작용하는 균열선단에서의 J-적분을 해석할 수 있는 프로그램을 개발하였다. 자체개발한 탄소성 해석프로그램을 이용하여 이종강재 용접시 잔류응력과 외력에 대한 응력분포를 계산하였으며, 이를 이용하여 잔류응력과 외력의 복합하중에 대한 J-적분을 계산하였다.

• 대한기계학회논문집
• /
• 제13권2호
• /
• pp.221-228
• /
• 1989

본 연구에서는 가상균열진전법과 수정 J-적분식을 연계하여 사용할 수 있는 유한요소 프로그램을 개발하고, 이 프로그램을 기존 결과가 있는 2상재료에 적응하여 타당성을 검토한 후, 다상재료의 경우에도 확장하였고, 실제 상변태가 발생하는 중수(heavy water)형 원자로 압력관(pressure tube)의 균열해석에 적용하여 보았다.

• Journal of Welding and Joining
• /
• 제14권1호
• /
• pp.38-46
• /
• 1996

High temperature low cycle fatigue crack growth behavior is investigated over a range of two temperatures and various frequencies in SUS 304 stainless steel. It is found that low frequency and temperature can enhance time-dependent crack growth. With high temperature, low frequency and long crack length, ${\Delta}J_c/{\Delta}J_ f$, the ratio of creep J integral range to fatigue J integral range is increased and time-dependent crack growth is accelerated. Interaction between ${\Delta}J_f$ and ${\Delta}J_c$ is occured at high frequency and low temparature and ${\Delta}J_c$, creep J integral range is fracture mechanical parameter on transition from cycle-dependent to time dependent crack growth in creep temperature region.

• 대한기계학회논문집A
• /
• 제27권7호
• /
• pp.1159-1169
• /
• 2003

This paper investigates the effects of T-stress and plastic hardening mismatch on the interfacial crack-tip stress field via finite element analyses. Plane strain elastic-plastic crack-tip fields are modeled with both MBL formulation and a full SEC specimen under pure bending. Modified Prandtl slip line fields illustrate the effects of T-stress on crack-tip constraint in homogeneous material. Compressive T-stress substantially reduces the interfacial crack-tip constraint, but increases the J-contribution by lower hardening material, J$\_$L/. For bimaterials with two elastic-plastic materials, increasing plastic hardening mismatch increases both crack-tip stress constraint in the lower hardening material and J$\_$L/. The fracture toughness for bimaterial joints would consequently be much lower than that of lower hardening homogeneous material. The implication of unbalanced J-integral in bimaterials is also discussed.

• 한국해양공학회지
• /
• 제9권2호
• /
• pp.98-111
• /
• 1995

High temperature low cycle fatigue shows that cycle-dependent crack growth owing to cyclic plastic deformation occurred simultaneosly with time-dependent crack growth owing to intergranular deformation. Consequently, to estimate crack growth rate uniquely, many to investigators have proposed various kinds of parameters and theories but these could not produce satisfactory results. Therefore the goal of this study is focused on prediction of crack growth rate using predominant damage rule, linear cumulative damage rule and transitional parameter ${\Delta}J_c/{\Delta}J_f$. On the basis of these sinusoidal loading waveform at 600$^{\circ}C$ and 700$^{\circ}C$.

• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.548-554
• /
• 1994

The high temperature fatigue crack growth behavior of SUS 304 stainless steel at $550^{\circ}C$ and $650^{\circ}C$ was investigated under various kinds of stress ratio and frequency in sinusoidal waveform on the basis of the non-linear fracture mechanics. The result arranging crack growth rate by modified J-integral J' showed influence of stress ratio and frequency. All the data obtained under the test at $550^{\circ}C$ were plotted within data band of da/dN-${\triangle}J_f$ relationship for cycle-dependent crack growth. On the basis of static creep and cycle-dependent data band; both time- and cycle-dependent crack growth behavior was observed under loading conditions at $650^{\circ}C$, but cycle-dependent crack growth behavior predominantly appeared and time-dependent crack growth behaviour was little observed under loading conditions at $550^{\circ}C$. Fractographic examinations for fracture surface indicated that the fracture mode was generally transgranular. The stripes were found on fracture surface and each stripe was accompanied by a crack tip blunting and an abrupt increase in the load-point displacement. The $J'_{an}$ had a validity in case of $650^{\circ}C, but scarcely had it in case of $550^{\circ}C$.

• 한국해양공학회지
• /
• 제10권1호
• /
• pp.65-74
• /
• 1996

Up to now, the existing crack growth modelling has used a mathematical approximation but an assumed function have a great influence on this method. Especially, crack growth behavior that shows very strong nonlinearity needed complicated function which has difficulty in setting parameter of it. The main characteristics of neural network modelling to engineering field are simple calculations and absence of assumed function. In this paper, after discussing learning and generalization of neural networks, we performed crack growth modelling on the basis of above learning algorithms. J'-da/dt relation predicted by neural networks shows that test condition with unlearned data is simulated well within estimated mean error(5%).

• 대한기계학회논문집A
• /
• 제20권4호
• /
• pp.2752-2759
• /
• 1996

This paper presents crack growth analysis approach on the basis of neural networks, a branch of cognitive science to high temperature low cycle fatigue that shows strong nonlinearity in material behavior. As the number of data patterns on crack growth increase, pattern classification occurs well and two point representation scheme with gradient of crack growth curve simulates crack growth rate better than one point representation scheme. Optimal number of learning data exists and excessive number of learning data increases estimated mean error with remarkable learning time J-da/dt relation predicted by neural networks shows that test condition with unlearned data is simulated well within estimated mean error(5%).

• 한국해양공학회지
• /
• 제6권1호
• /
• pp.122-130
• /
• 1992

The effect of loading waveform on elevated temperature low-cycle fatigue crack growth behavior in a SUS 304 stainless steel have been investigated under symmetrical trangular (fast-fast), trapezoidal and asymmetrical(fast-slow, slow-fast) waveforms at 650.deg. C. It was found that the crack growth rate in fast-slow loading waveform appeared to be higher a little and the crack growth rate in slow-fast loading waveform much higer than that in fast-fast loading waveform, and difference in crack growth rate between fast-show and slow-fast waveforms nearly didn't appear in the region of da/dN>10/sup -2/ The crack growth rate in the trapezoidal loading waveform with t/sub h/=500sec appeared to be faster than that in slow(500sec)-fast(1sec). In addition, parameter modified J-integral could be considered as useful parameter for fatigue crack growth rate in all waveforms. The result obtained are as follow. da/dN=4.91*10/sup -3/ (.DELTA. J/sub c/)/sup 0.565/.