Processing math: 100%
  • Title/Summary/Keyword: 수적층

Search Result 1,406, Processing Time 0.024 seconds

Rethinking of Quaternary deposits and implication of rice seeds in Cheongju Sorori Site, Korea (청주 소로리 유적의 제4기 퇴적층과 볍씨 출토의 의미 재고찰)

  • Ju Yong Kim;Dong-Yoon Yang;Sangheon Yi;Wook-Hyun Nahm
    • The Korean Journal of Quaternary Research
    • /
    • v.31 no.2
    • /
    • pp.13-22
    • /
    • 2017
  • The age of the Sorori old fluvial deposits is assumed as old as Last Interglacial(MIS 5) when appying the thalassostatic terrace formation in mid- to downstream Keum river basin, while the young fluvial deposits are interpreted to be formed since the post-LGM(last glacial maximum), including both the Bølling-Allerød (B/A) Interstadial(12,700~14,700 cal-yrBP), and the Younger Dryas Stadial(11,700~12,900 cal-yrBP). The wild rice seed like Oryza rufipogon found in the middle organic muds of the young fluvial deposits dated after about 15,000 cal-yrsBP, when the transition from the subalpine conifer forest to the deciduous broad-leaved forest was conspicuously evidenced in the upper part of OC-2 palynofloral zone of the in Cheonju Sorori site, In particular the OC-2 palynofloral zone ranging towards the upper part of middle organic muds(peaty muds) is interpreted to be formed in the B/A Interstadial. It is regarded that Cheongju Sorori rice seeds are associated with warm palynological evidences and backswamp insects during the Lastest Glacial, showing appearance of relatively warm climate similar to the present.

Optimal Shear Strength Enhancement using Corrugated CFRP Panel for H beam with Slender Web (세장판 복부를 갖는 H형 보의 파형 CFRP 패널을 이용한 최적 전단보강)

  • Ga-Yoon Park;Min-Hyun Seong;Jin-Kook Kim
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.28 no.5
    • /
    • pp.10-19
    • /
    • 2024
  • In this study, FEM analysis was performed with the goal of optimal design of corrugated CFRP panels reinforcing H-shaped beams with slender plate webs. The buckling reinforcement performance of corrugated CFRP panels according to various specifications was evaluated, and in particular, a new reinforcement method was proposed by analyzing the effect of the ratio of vertical reinforcement according to the net height of the abdomen of the H-type beam on the location of the first elastic buckling mode. To minimize the amount of CFRP used, the attachment angle was set to 45 degrees. Furthermore, parameter analysis was performed according to changes in the specifications of the corrugated CFRP panel, and the buckling reinforcement performance of the corrugated CFRP panel was evaluated through the ductility factor. In addition, we attempted to use the material efficiently by simultaneously considering the maximum load and ductility factor along with the volume of the corrugated CFRP panels. It was confirmed that the model with two or three-layer CFRP laminate have a high ductility factor and efficient use of materials, and that the buckling reinforcement performance is predominantly affected by the length and height of the corrugated CFRP panel rather than the width.

Comparison and Evaluation of Printing Angle Dependent Fabrication of Microneedles Using Polyjet and DLP-SLA 3D Printers (Polyjet과 DLP-SLA 3D 프린터를 이용한 인쇄 각도에 따른 마이크로니들 제작의 비교 및 평가)

  • Seung Hui An;Heon-Ho Jeong
    • Applied Chemistry for Engineering
    • /
    • v.35 no.5
    • /
    • pp.423-428
    • /
    • 2024
  • Microneedles with micron-sized needle arrays are an emerging technology for the transdermal administration of active pharmaceutical ingredients with minimally invasive pain. Over the past decade, although various additive manufacturing technologies have been employed for precise fabrication of microneedles, these methods are often limited by material compatibility and bioavailability, in addition to being time-consuming and costly. In here, we compare the resolution of Polyjet and DLP-SLA 3D printing methods for the precise fabrication of biodegradable PCLDA/PEGDA microneedles. To enhance the structural accuracy of the microneedles from both printing methods, we evaluate the 3D printing conditions, including 3D printing angle and needle height and diameter. Molds for microneedles are fabricated using optimized 3D printing methods, and subsequent replica molding processes are employed to fabricate the polymeric microneedles with sharp need tips. Finally, we use photocurable PCLDA and PEGDA for biodegradable and biocompatible microneedles, and their mechanical properties as PCLDA concentrations are analyzed to assess the strength required for skin insertion. This study has demonstrated the efficient and low-cost fabrication of high-resolution microneedles for transdermal drug delivery.

Countermeasure and Outbreak Mechanism of Cochlodinium polykrikoides red tide 1. Environmental characteristics on outbreak and disappearanceof C. polykrikoides bloom (Cochlodinium polykrikoides 적조 발생기작과 대책 1. Cochlodinium polykrikoides 적조 발생과 소멸의 환경특성)

  • Park, Young-Tae;Kim, Young-Sug;Kim, Kui-Young;Park, Jong-Soo;Go, Woo-Jin;Jo, Yeong-Jo;Park, Seong-Yoon;Lee, Young-Sik
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.6 no.4
    • /
    • pp.259-264
    • /
    • 2001
  • Typhoon and neap tide on Cochlodinium polykrikoides bloom and water temperature on disappearance of C. polykrikoides bloom were investigated to elucidate the outbreak mechanism of C. polykrikoides blooms at Naro and Namhae coastal area in South Sea of Korea. The first observation of C. polykrikoides blooms were observed when thermocline was disappeared by typhoon, tide, etc. The first blooms of C. polykrikoides were observed on neap tide or before one day from neap tide in 1996-1998 and 2000. However, thermocline was disappeared by typhoon in 1994 and 1999, the first blooms were observed early 12-30 day than 1996-1998 and 2000. The main reason of disappearance of C. polykrikoides blooms after typhoon on 1997-2000 seems to be other environmental change by typhoon rather than low water temperature. In the future, the first C. polykrikoides bloom will be appear around the first neap tide of latter part of August with breaking down of thermocline, but if the thermocline be collapsed by typhoon in July, the C. polykrikoides bloom will be appear at beginning of August. The outbreak of C. polykrikoides blooms will be explain as follows: The vegetative cells, which was germinated by environmental change or already exist in surface water at low level, input to the surface water, and then nutrients and trace metals which were suppled from out side of C. polykrikoides bloom area inflow to surface. The vegetative cells are growth by the nutrients and trace metals at suitable environmental conditions e.g. water temperature, salinity, and sufficient light.

  • PDF

Development of New 4D Phantom Model in Respiratory Gated Volumetric Modulated Arc Therapy for Lung SBRT (폐암 SBRT에서 호흡동조 VMAT의 정확성 분석을 위한 새로운 4D 팬텀 모델 개발)

  • Yoon, KyoungJun;Kwak, JungWon;Cho, ByungChul;Song, SiYeol;Lee, SangWook;Ahn, SeungDo;Nam, SangHee
    • Progress in Medical Physics
    • /
    • v.25 no.2
    • /
    • pp.100-109
    • /
    • 2014
  • In stereotactic body radiotherapy (SBRT), the accurate location of treatment sites should be guaranteed from the respiratory motions of patients. Lots of studies on this topic have been conducted. In this letter, a new verification method simulating the real respiratory motion of heterogenous treatment regions was proposed to investigate the accuracy of lung SBRT for Volumetric Modulated Arc Therapy. Based on the CT images of lung cancer patients, lung phantoms were fabricated to equip in QUASARTM respiratory moving phantom using 3D printer. The phantom was bisected in order to measure 2D dose distributions by the insertion of EBT3 film. To ensure the dose calculation accuracy in heterogeneous condition, The homogeneous plastic phantom were also utilized. Two dose algorithms; Analytical Anisotropic Algorithm (AAA) and AcurosXB (AXB) were applied in plan dose calculation processes. In order to evaluate the accuracy of treatments under respiratory motion, we analyzed the gamma index between the plan dose and film dose measured under various moving conditions; static and moving target with or without gating. The CT number of GTV region was 78 HU for real patient and 92 HU for the homemade lung phantom. The gamma pass rates with 3%/3 mm criteria between the plan dose calculated by AAA algorithm and the film doses measured in heterogeneous lung phantom under gated and no gated beam delivery with respiratory motion were 88% and 78%. In static case, 95% of gamma pass rate was presented. In the all cases of homogeneous phantom, the gamma pass rates were more than 99%. Applied AcurosXB algorithm, for heterogeneous phantom, more than 98% and for homogeneous phantom, more than 99% of gamma pass rates were achieved. Since the respiratory amplitude was relatively small and the breath pattern had the longer exhale phase than inhale, the gamma pass rates in 3%/3 mm criteria didn't make any significant difference for various motion conditions. In this study, the new phantom model of 4D dose distribution verification using patient-specific lung phantoms moving in real breathing patterns was successfully implemented. It was also evaluated that the model provides the capability to verify dose distributions delivered in the more realistic condition and also the accuracy of dose calculation.

Demonstration and Operation of Pilot Plant for Short-circuit Nitrogen Process for Economic Treatment of High Concentration Nitrogen Wastewater (고농도 질소함유폐수의 경제적 처리를 위한 단축질소공정 파일럿플랜트 실증화 및 운영 결과)

  • Lee, Jae Myung;Jeon, Ji-hyeong;Choi, Hong-bok
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.28 no.1
    • /
    • pp.53-64
    • /
    • 2020
  • A 2㎥/d combined wastewater treatment pilot plant containing the multi-stage vertical stacking type nitrification reactor was installed and operated for more than 1 year under the operating conditions of the short-circuit nitrogen process (pH 8, DO 1mg/L and Internal return rate 4Q from nitrification to denitrification reactor). For economically the combination treatment of food wastewater and the leachate from a landfill, the optimal combination ratio was operated by adjusting the food wastewater with the minimum oil content to 5-25% of the total throughput. The main treatment efficiency of the three-phase centrifugal separator which was introduced to effectively separate solids and oil from the food wastewater was about 52% of SS from 116,000mg/L to 55,700mg/L, and about 48% of normal hexane (NH) from 53,200mg to 27,800 mg/L. During the operational period, the average removal efficiency in the combined wastewater treatment process of BOD was 99.3%, CODcr 94.2%, CODmn 90%, SS 70.1%, T-N 85.8%, and T-P 99.2%. The average concentrations of BOD, CODcr, T-N, and T-P of the treated water were all satisfied with the discharge quality standard for landfill leachate ("Na" region), and SS was satisfied after applying the membrane process. On-site leachate had a relatively high nitrite nitrogen content in the combined wastewater due to intermittent aeration of the equalization tanks and different monthly discharges. Nevertheless nitrite nitrogen was accumulated, denitrification from nitrite nitrogen was observed rather than denitrification after complete nitrification. The average input of anti-forming chemical during the operation period is about 2L/d, which seems to be economical compared to the input of methanol required to treat the same wastewater.

Quality Stability of Instant Powdered Soup using Canned Oyster Processing Waste Water (굴통조림 부산물 유래 인스턴트 분말 수프의 품질안정성)

  • KIM Jin-Soo;Heu Min-Soo;HEU Min-Soo;CHO Moon-Lae
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.34 no.4
    • /
    • pp.389-393
    • /
    • 2001
  • For an effective utilization, quality stability of instant powdered oyster soup made of canned oyster processing waste water (IPSW) was determined. Instant powdered soup from oyster hot-water extracts (IPSE) was also prepared by mixing hot-water extract powder (15 g) with table salt (5 g), cream powder (19 g), milk replacer (12 g), wheat flour (20 g), corn flour (15 g), starch (5 g), glucose (7.5 g) and onion powder (1.5 g). In preparing IPSW, mixed powder from wash water and boiling liquid waste, instead of powder from hot-water extracts and table salt, was added (powder from boiling liquid waste: powder from wash water= 12: 8) and other additives were added in proportion to those in the IPSE. The moisture content, water activity, peroxide value and fatty acid composition showed little changes during storage of the IPSW. The pH, volatile basic nitrogen content and brown pigment formation increased slightly, while white index decreased slightly during storage of IPSW. No significant difference was observed in the changes of food component during storage between IPSW and IPSE. According to a sensory evaluation, the change in quality of IPSW was negligible during 12 months of storage. from the results of the chemical experiment and sensory evaluation, IPSW packed with laminated film bag (OPP, 20μm/PE,20μm/paper,45g/m3/PE,20μm/Al,7μm/PE,20μm) was revealed to be preserved in good quality during 12 months of storage.

  • PDF

Relationship between Environmental Exposure and Biological Monitoring Values in Workers Exposed to Styrene (스타이렌 폭로 근로자의 환경중 폭로농도와 생물학적 모니터링에 관한 연구)

  • Paik, Jong-Min;Lee, Jong-Yung;Kim, Jung-Man
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.7 no.2
    • /
    • pp.161-170
    • /
    • 1997
  • This is an effort to confirm changes biological monitoring according to changes in levels of exposure to styrene for industrial workers. This study was conducted on 108 workers, including male of 64 and female 44 who were working at factories of FRP, dipping, and coating. An improved passive monitor method(organic vapor monitor; OVM) was employed to determine levels of exposure. The biological monitoring include blood styrene concentration, urinary mandelic acid(MA), and urinary phenylglyoxylic acid(PGA). Biological monitoring were made through the Collection of blood and urine. The mean value of exposure to styrene was 21.0ppm, which is measured by organic vapor monitor, one of improved passive monitors. The highest exposure level was observed among workers in boat factories, laminating procedure workers, processing workers, respectively(p<0.01). For exposure level, 11% of subjects under study showed over 50ppm which is time weighted average(TWA). The correlation coefficient between biological specimens and the exposure level was 0.62 for blood styrene concentration, 0.58 for MA corrected by creatinine, and 0.70 for PGA corrected by creatinine, respectively(p<0.01). The regression analyses found exposure level relative importance in explaining variance in biological monitoring. In additional to that, gender was a significant factor in explaining variance of MA and MA+PGA. Almost half of variance(49%) in blood styrene concentration was explained by predictors, including exposure level, age, gender, duration, and drinking volume during the last week(p<0.01). The very high correlation(higher than 0.95 was found when a comparison was made among three types of corrected methods, including uncorrected specific gravity and creatinine. In conclusion, these findings suggest OVM to represent levels of exposure to styrene for industrial workers. A discussion was made on possible use of specific gravity sample for biological monitoring. Exposure level may be predicted on MA, PGA in urine, which could be applied to represent biological monitoring.

  • PDF

Preparation and Keeping Quality of Vacuum Packed Seasoned-Dried Sardine (진공포장 정어리 조미건제품의 제조 및 품질안정성)

  • LEE Eung-Ho;KIM Jin-Soo;KIM Han-Ho;LEE Jin-Kyung;OH Kwang-Soo;KWON Chil-Sung
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.19 no.1
    • /
    • pp.52-59
    • /
    • 1986
  • As one of trials to process instant sardine foods which can be preserved at room temperature, three kinds of products were prepared as seasoned-dried product (control, C), liquid smoked seasoned-dried product(S) and antioxidant treated seasoned-dried product(E), and their processing conditions and quality stability during storage were examined. Raw sardines were dressed, steamed and then filleted. The sardine fillets were seasoned with the mixed seasoning solution containing 28.0% of sorbitol, 14.0 of sugar, 5.6% of table salt, 1.8% of monosodium glutamate, 0.6% of garlic powder and 50.0% of water at 5C for 15 hours, and dipped for 45 seconds in 10% Smoke-EZ solution. After liquid smoking, the seasoned and liquid smoked sardine fillets were dried at 45C for 4 hours, vacuum packed in laminated plastic film bag(polyester/casted polypropylene= 12μm/70μm,15×16cm), and finally pasteurized in water at 95C for 30 minutes. The results obtained from chemical and microbial experiments during storage are as follows : the moisture contents, water activity and pH of the products showed little change, and VBN of them slightly increased during storage. The TBA value and POV of the products (E, S) were lower than those of control product(C) considerably. In color values, L value (linghtness) decreased while a and b value (red and yellow) revealed a tendency to increase during storage. The fatty acid composition of the products were similar to those of raw sardine, the predominant fatty acids were 16:0, 20:5, 18:1 and 22:6. The products (E, S) have a good preservative effect on highly unsturated fatty acids during storage. Viable cell counts of those products were negative and histamine contents were less than 2.0 mg/100 g. Among the texture profiles, hardness, elasticity and cohesiveness of the products slightly decreased during storage. Judging from the sensory evaluations, liquid smoked seasoned-dried product(S) was the most desirable, and the products could be preserved in good condition for 40 days at 25±3C.

  • PDF

Preparation and Keeping Quality of Seasoned Smoked-Dried and Vacuum-Packed Squid (훈액처리에 의한 조미오징어 훈제품의 가공 및 품질안정성)

  • LEE Eung-Ho;PARK Hyang-Suk;OH Kwang-Soo;CHA Yong-Jun
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.18 no.4
    • /
    • pp.316-324
    • /
    • 1985
  • Vacuum-packed and seasoned smoked-dried products of red squid, Ommastrephes bartrami, caught in the Northern Pacific Ocean, were prepared and stored at room temperature for 90 days to test their keeping quality. Defrosted squids were eviscerated, skinned, and cut. The mantle meats were flavored with seasoning powders prepared from sugar, sorbitol, salt, monosodium glutamate, or smoke flavor (Smoke-EZ, Alpha Foods Co., Ltd.). After seasoning, the mantle meats were dried at 45C for 7 hours, vacuum packed in plastic film bags, and pasteurized in water at 95C for 30 minutes. Three kinds of products were prepared : control products (seasoned-dried), solid smoked seasoned-dried and liquid smoked seasoned-dried. The moisture level, water activity, color value (L, a and b value), texture, and viable cell counts of bacteria in these products were determined during storage at room temperature, 5Cand35C, respectively. The results showed that the products could be preserved at good condition for 90 days though they developed pale brown color during storage. The contents of free amino acids, nucleotides and their related compounds, and the compositions of fatty acids of raw squid and smoked products were analysed. In the amino acids, arginine, taurine, glycine and proline were abundant in raw and smoked products. The contents of hypoxanthine of raw and smoked products were higher than the other nucleotides and their related compounds. In fatty acid compositions of raw and smoked products, the dominant fatty acids were docosahexaenoic acid (22:6), hexadecanoic acid(16:0) and eicosapentaenoic acid (22:5).

  • PDF