• Proceedings of the Korean Reliability Society Conference
• /
• 2006.05a
• /
• pp.239-246
• /
• 2006

프레스다이용 코일스프링은 자동차 및 전자제품의 외형생산에 필요한 금형 내에 장착되는 금형용 스프링으로서 녹아웃 및 스트리퍼 등에 사용되고 있다. 프레스다이용 코일스프링이 사용 중 파손 시에는 고가인 금형의 손상 및 생산성에 영향을 미칠 수도 있기 때문에 사용 환경에서의 신뢰성확보가 요구되어지고 있다. 특히 중(重)하중 및 극중(極重)하중용 스프링은 과거 현장에서 파손사례가 자주 발생함으로 인해 외산을 선호하는 경향이 있는 형편이다. 이에 국산 스프링의 신뢰성검증 및 확보를 위해 신뢰성기반구축사업을 통해 신뢰성평가기준(RS D 0014)가 제정되었으며, 이 평가기준에 의거하여 국내 업체의 제품에 대해 신뢰성평가를 실시하였다. 프레스다이용 코일스프링의 파손원인은 주로 반복하중에 의한 피로파손과 일정한 변위의 변형으로 발생하는 코일스프링 자유높이의 축소로 크게 구분되어질 수 있다. 시험결과 주 파손양상은 피로에 의한 균열발생이었으며, 코일 끝단부와 끝단부 직하부의 코일과의 마찰에 의한 균열발생이 주원인이었다. 즉, 코일의 끝단면과 직하면 코일이 연속적으로 부딪침으로써 발생한 변형 및 마모에 의해 표면균열이 발생하고, 표면균열에서 반복적인 부하하중이 가해짐으로써 피로균열 진전을 통해 점차적으로 파손이 진행되어졌음을 알 수 있었다. 본 발표에서는 기준에 의거하여 로하중용 프레스 다이용 코일스프링을 평가한 신뢰성평가시험 결과에 대해 보고하고, 파단면 관찰과 외산제품과의 미세조직 및 조성 등의 비교분석결과 등을 기초로 파손원인을 분석한 결과에 대해 보고하고자 한다.제고할 수 있을 것으로 기대한다.X>$CdCl^+,\;CdSO_4$ 등이 형성되었다. 수은의 경우는 해수 및 증류수를 용출용매로 이용한 모든 경우에서 납, 구리, 카드뮴과는 달리 대부분 침전하였다. 더욱이 해수에 존재하는 고농도 염소($Cl^-$)와의 수착으로 인해 finite solid인 calomel($Hg_2Cl_2$)이 형성되어 대부분 침전(SI=0)되기 때문에 납, 구리, 카드뮴 보다 더 낮은 환경이동성을 갖을 것으로 사료된다. 상기 실험결과 용출용매로 증류수와 해수를 이용했을 때, 제강 슬래그에서 용출되는 납, 구리, 카드뮴, 수은의 용출 경향의 차이를 확인할 수 있었고 이에 따라서, 납, 구리, 카드뮴의 용출 유해성은 낮기 때문에 해양구조물로의 제강슬래그 유효이용은 적합할 것으로 판단되었다.im80%$로 계산되었다. 열형광선량계로 측정된 방사선량은 각각 1.8, 1.2, 0.8, 1.2, 0.8 (70 cm 거리) cGy로 측정되었으며, 환자의 복부 표면에서의 서베이메터를 이용한 측정량은 10.9 mR/h였다. 차폐구조물의 사용 시 전체 치료 동안에 태아선량은 약 1 cGy 정도로 평가되었다. 결론 : AAPM Report No.50의 자료에 따르면, 임산부의 방사선 치료 시 태아의 방사선 피폭선량은 5 cGy 이하일 경우에 방사선 피폭에 따른 태아의 위험이 거의 없는 것으로 제시되고 있다. 본원에서 차폐 구조물을 설치하였을 경우에 측정된 태아선량은 약 1 cGy로 측정되었고, 고안된 차폐구조물

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.39-49
• /
• 2023

Soil contaminants measured and managed in Korea include those of geologic origin such as arsenic, cadmium, copper, lead, zinc, nickel, mercury, and fluoride. This study identifies the distribution of these contaminants using GIS modeling to analyze the spatial probability of soil contamination originating from geology. The modeling found that cadmium, copper, lead, nickel, and mercury often exceed the regulated standard by <1%. Concentrations of arsenic and zinc greatly exceeded the standard in the vicinity of mines and industrial complexes: mining and industry seemed to have substantial effects on the concentrations of these metals. Although fluoride was sampled at the lowest number of points, its frequency of exceeding the standard was the highest. No obvious source of artificial contamination has been identified, and fluoride's distribution characteristics showed continuity over a wide area, suggesting a strong correlation between geological characteristics and fluoride concentration. The highest frequencies of fluoride exceeding the standard were in Jurassic granite (40.00%) and Precambrian banded gneiss (34.12%). As these rocks contributed to the formation of soil through their weathering, high fluoride concentrations can be expected in soil in areas where these rocks are distributed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.3
• /
• pp.110-115
• /
• 2023

During the Hg₂Br₂ physical vapor transport process, with increasing the partial pressure of component B, P_B from 40 Torr to 200 Torr, a unicellular convective flow structures move from the crystal growth region to the center region in the vapor phase. The boundary layer flow is dominant for P_B = 40 Torr, and the core region flow is dominant for P_B = 200 Torr. The flow in the vapor phase shows a three-dimensional convective flow structure with a single cell (unicellular) for P_B = 40 Torr and 200 Torr, exhibits an asymmetrical flow with respect to the x, y central axis under the horizontally oriented configuration with an aspect ratio (length-to-width) of 3 and linear conducting walls. The critical temperature difference between the source and crystal region is about 30 K. The total molar flux of Hg₂Br₂ increases with the temperature difference until the total molar flux reaches the critical value. At the critical total molar flux, the total molar flux abruptly decreases.

• Korean Journal of Environmental Agriculture
• /
• v.4 no.2
• /
• pp.88-94
• /
• 1985

In order to investigate the pollution potential of soils after the construction of Onsan Industrial Complex(non-ferrous metal refineries), concentrations of hazardous heavy metals were analyzed for soil samples collected from paddy, upland, orchard and forest soils around the Complex during the period of March 1978 to May 1979. The results are summarized as follows. 1) The concentrations of heavy metals (air-dry basis) for cultivated soil samples from 46 sites were obtained in the range of trace-9.3 ppm As, trace-0.6 ppm Cd, 4${\sim}$22 ppm Cu, trace-0.37 ppm Hg, 6${\sim}$43 ppm Pb and 27${\sim}$93 ppm Zn, which were regarded as non-polluted when compared with the whole Korea data for non-polluted paddy soils. 2) When the heavy metal concentrations were compared with respect to paddy, upland and orchard soils, no significant difference was observed in As, Cd, Cu and Zn whereas significant difference was observed in Hg and Pb. When they were compared with respect to region surrounding the Complex, no significant difference was observed in As, Cd, Hg whereas significant difference was observed in Cu and Pb. 3) Soil samples from several sites near Korea Zinc Refinery were contaminated with Cd, Pb and Zn, due to the accidental emission during its testing operation. Any further contamination was not observed after regular operation of the Refinery.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.5
• /
• pp.593-600
• /
• 1999

The survival rates of Littorina brevicula exposed to experimental concentration regimes of TBTCl, HB and Cd on the large and the small size individuals during 80 days were $80\%$ at 0,9ppb TBTCl, 40 and $25\%$, respectively at 200ppb Hg, and 75 and $45\%$, respectively at 100ppb Cd. The growth rates of the experimental animals exposed to each concentration for 80 days was 0.023mm/day at control, 0.019mm/day at 0.1ppb and 0.014mm/day at 0.9ppb TBTCl, 0.022 mm/day at 5ppb, 0.008 mm/day at 200ppb Hg, and 0.017 mm/day at 5ppb, 0.008mm/day at 100ppb Cd. The respiration rates and excretion rates of the experimental animals exposed to chronic concentration of TBTCl, Hg and Cd were decreased until approximatively 40 days and increased after, Toxic effect of pollutants on L. brevicula was highest at TBTCl. The histological injury of L. brevicula exposed to TBTCl, Hg and Cd was shown at gill, digestive organ and muscle, respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.1
• /
• pp.9-17
• /
• 2015

In order to elucidate the current state of marine pollution of heavy metals around major shipyards in Korea, seawater samples were collected at eleven sampling stations and four control stations around 4 major shipyards located in the southeastern coast of Korea in summer 2010, and 6 kinds of metals such as copper(Cu), zinc(Zn), iron(Fe), cadmium(Cd), lead(Pb) and mercury(Hg) in seawater samples were analyzed. The analyses of heavy metals in seawater showed that the mean Cu concentrations in seawater around 4 major shipyards were in the range of $0.817{\sim}1.638{\mu}g/L$ which were lower than Korean environmental standards of $20{\mu}g/L$ for the protection of human health(PHH) and of $3{\mu}g/L$ for short-term protection of marine ecosystem(SPME) but higher than Cu concentration at control station by a factor of up to 2.75. The mean Zn concentrations were in the range of $0.228{\sim}0.567{\mu}g/L$ which were lower than Korean environmental standards of $100{\mu}g/L$ for PHH and $34{\mu}g/L$ for SPME but higher than Zn concentration at control station by a factor of up to 5.91. The mean Fe concentrations were in the range of $3.332{\sim}7.410{\mu}g/L$ which were higher than Fe concentration at control station by a factor of up to 6.75. The mean Cd concentrations were in the range of $0.013{\sim}0.028{\mu}g/L$ which were lower than Korean environmental standards of $10{\mu}g/L$ for PHH and $19{\mu}g/L$ for SPME but higher than Cd concentration at control station by a factor of up to 2.33. The mean Pb concentrations were in the range of $0.007{\sim}0.126{\mu}g/L$ which were lower than Korean environmental standards of $50{\mu}g/L$ for PHH and $7.6{\mu}g/L$ for SPME. The mean Hg concentrations were in the range of $0.002{\sim}0.004{\mu}g/L$ which were lower than Korean environmental standards of $0.5{\mu}g/L$ for PHH and $1.8{\mu}g/L$ for SPME. Although the concentrations of metals such as Cu, Zn and Fe which were used in shipbuilding works were lower than Korean environmental standards for PHH and SPME, the fact that the concentrations of Cu, Zn and Fe at sampling stations around major shipyards were higher than those at control stations implies that the works in shipyards had some effects on marine water quality around shipyards. Therefore, marine environment management such as the prevention and control of the discharge of various pollutants from shipyards is required on national level.

• Journal of Food Hygiene and Safety
• /
• v.36 no.3
• /
• pp.248-256
• /
• 2021

A total of 120 samples corresponding to 12 categories of dried processed fishery products distributed in Gyeonggi-do were examined for radioactivity contamination (¹³¹I, ¹³⁴Cs, ¹³⁷Cs) and heavy metals (lead, cadmium, arsenic, and mercury). One natural radioactive material, ⁴⁰K, was detected in all products, while the artificial radioactive materials ¹³¹I, ¹³⁴Cs and ¹³⁷Cs were not detected at above MDA (minimum detectable activity) values. The detection ranges of heavy metals converted by biological basis were found as follows: Pb (N.D.-0.332 mg/kg), Cd (N.D.-2.941 mg/kg), As (0.371-15.007 mg/kg), Hg (0.0005-0.0621 mg/kg). Heavy metals were detected within standard levels when there was an acceptable standard, but the arsenic content was high in most products, although none of the products had a permitted level of arsenic. In the case of dried processed fishery products, there are products that are consumed by restoring moisture to its original state, but there are also many products that are consumed directly in the dry state, so it will be necessary to set permitted levels for heavy metals considering this situation in the future. In addition, Japan has decided to release contaminated water from the Fukushima nuclear power plant into the ocean, so there is high public concern about radioactivity contamination of food, including fishery products. Therefore, continuous monitoring of various food items will be necessary to ease consumers' anxiety.

• Journal of Environmental Health Sciences
• /
• v.34 no.1
• /
• pp.42-48
• /
• 2008

The objectives of this study were to measure ambient TGM concentrations in Seoul Korea, to determine the temporal variation of TGM, and to analyze the relationships among TGM, meteorological data and PM2.5 measured at the same time. Ambient TGM and PM2.5 concentrations were measured at the roof of the Graduate School of Public Health building in Seoul, Korea for the period of January to October 2004. Average TGM concentration was $3.43{\pm}1.17ng/m^3$. The average TGM was at a low concentration similar to those of background sites in other countries. The temporal variations and meteorological phenomena of TGM were not statistically significant. There was a positive link between TGM and PM2.5. It didn't indicate that reduction of $Hg^{2+}$ to Hg0 had occurred in liquid water contained in smog as in a previous study, but it shows that PM2.5 and TGM could be emitted from the same sources such as power plants and combustion engines. Also, the strong correlation between TGM and $SO_2$ concentrations indicated that the source of TGM was from fossil fuel combustions including coal combustion. Specifically, $SO_2\;and\;SO_4{^2-}$ concentrations correlated to TGM concentrations could be linked to TGM emitted from local and regional sources as well.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.4
• /
• pp.687-694
• /
• 1996

Myrosinase was purified from Korean mustard seed(Brassica juncea) by a sequential process of DEAE-cellulose, concanavalin A-sepharose, and Superose 6 chromatography. The molecular weight of puri-fied myrosinase(II-2) determined by SDS-polyacrylamide electrophoresis was 67KD. About a 248-fold purification for myrosinase II-2 was obtained after Superose 6 chromatography. Optimum pH of the myrosinase was 7.0 and optimum temperature of the enzyme was $3^{\circ}C.$ The enzyme was stable at pH 7.0, and below $30^{\circ}C.$ Cu, Hg and Fe ion significantly inhibited the enzyme activity, but ascorbic acid enhanced, resulting in a maximum activity by 1mM ascorbic acid. Among tile ascorbic acid ana-logues, dehydroascorbic acid inhibited the enzyme activity, whereas others showed a little effect. Reducing agents such as 2-mercaptoethanol and dithiothreitol inhibited the enzyme activity, but the reducing agents with ascorbic acid was enhanced enzyme activity.

• Applied Biological Chemistry
• /
• v.36 no.2
• /
• pp.86-92
• /
• 1993

Myrosinase from radish was purified by DEAE Bio-Gel, Con-A, and Superose-6 column. The purified myrosinase(II) possessed 2 subunits, and their molecular as determined by SDS-polyacrylamide gel electrophoresis were 53 and 39 KD, respectively. The specific activity of purified enzyme was 37,500 units/mg. The enzyme was purified approximately 44-fold compared to the crude enzyme. Optimum pH of the myrosinase was $6.5{\sim}7.0$ in phosphate and Tris-HCl buffer solutions. Optimum temperature of the enzyme was $37{\sim}38^{\circ}C$. The enzyme was stable at pH 7.0, and less than $30^{\circ}C$. Cu or Hg ion significantly inhibited the enzyme activity, but ascorbic acid enhanced, resulting in a maximum activity by 1 mM ascorbic acid. Among the ascorbic acid analogues, dehydroascorbic acid did not affect, whereas others showed a little effect, but less than ascorbic acid itself. Individual 2-mercaptoethanol and dithiothreitol (reducing agents) did not enhance the enzyme activity. but 2-mercaptoethanol effect was enhanced when mixed with ascorbic acid.