• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.130-138
• /
• 2008

In this paper, we propose a user selection method to maximize the sum-rate of downlink over opportunistic beamforming. The throughput of an opportunistic beamforming with non-uniformly distributed or a small number of users can decrease. In order to improve the throughput, we propose a scheduling method that does not use SINR or SNR but uses the effective channel gain of each user obtained from the SINR or SNR feedback. The proposed method makes it possible to select users flexibly according to the distribution of users. In numerical results, we show that the proposed methods improve the average sum-rate about 60% when users are distributed non uniformly.

• KSBB Journal
• /
• v.15 no.6
• /
• pp.566-572
• /
• 2000

Experimental studies were carried out to develop an osmotolerant mutant of Candida magnoliae JH and to determine the optimum concentrations of carbon and nitrogen sources to improve erythritol yield and productivity. Mutants of C. magnoliae JH were prepared by treatment with ethylmethane sulfonate, and osmotolerant mutants were isolated from the agar plate colonies containing 2.5 M KCI. Among the mutants isolated, one mutant M26 was finally selected based on erythritol yield and productivity. In shake flask culture, glucose proved to be the best carbon source and the optimum yeast extract concentration was 5 g/L based on 100 g/L glucose. The erythritol yield and productivity of mutant M26 were greater than wild type in 100 g/L glucose medium. in the fermentation experiments, erythritol production increased with increased glucose concentration, up to a limit of 250 g/L. The maximum concentration of erythritol achieved 127.5 g/L, and the yield and productivity of erythritol production were 51.0% and 0.63 g/L-h, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.6
• /
• pp.453-458
• /
• 2002

High temperature sterilization method (30min. at $40^{\circ}C$longrightarrow30 min. at $70^{\circ}C$longrightarrow30 min. cooling at $20^{\circ}C$) was evaluated better than that of chloride, ion water, $O_3$ water, and salt water for the controling of micro-organisms at the early stage of sprout culture. Due to the improved germination rate and effective control of micro-organisms at early stage, the method resulted in much lower in the number of micro-organisms, higher in sprout yield, and 2 days longer in quality keeping at market than sprouts prepared by conventional method. There are two methods related with water temperature; constant temperature method (18.5$\pm$ $0.5^{\circ}C$) which keeps the same water temperature during the culture and 3-stage temperature method which changes the water temperature depending on the days after culture. Three-stage temperature method set the temperature at 21$\pm$ $1^{\circ}C$) in the second and third days after the initial acceleration of germination (about 4 hours), at 18.5$\pm$0.5$^{\circ}C$ in the fourth and fifth days, and at 17.0$\pm$ $0.5^{\circ}C$) in the sixth and seventh days. Three-stage temperature method could enhance the resistance power to diseases at the early growth stage, control the growth to standard goods (8-9cm in length and 2.15-2.30mm in width), and keep good body color at the middle or final stage. This method also increased the sprout yield by 6% compared with the conventional method, constant temperature method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7B
• /
• pp.613-627
• /
• 2004

In this paper, we propose an Aggregate Fairness Maker (ARM) required for an Edge router to improve fairness of throughput among the flows of Assured Service in DiffServ with different round trip time (RTT) and we propose a user flow Three Color Marker (uf-TCM) as a flow marker that marks packets from the flow as green, yellow, or red. A yellow packet is the packet that consumes loss token in uf-TCM as well as that is demoted green packet in AM due to disobey the aggregate traffic profile. The proposed AFH promotes yellow packet to green packet or demotes green packet to yellow packet through the fair method without per-flow management, and it improves the feirness of throughput among the flows as well as link utilization. A yellow packet and a red packet have the same drop precedence at Core Router in our scheme. So we can use the RIO buffer management scheme. We evaluated the performance of our proposed AFM and the REDP Marker that was proposed to improve fairness without per-flow management. Simulation results show that, compared with the REDP marker, proposed AFM can improve performance of throughput fairness among the flows with different RTT and link utilization under the over-provisioning, exact-provisioning, and under-provisioning network environments at Multiple DiffServ domains as well as at Single DiffServ domain.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.712-714
• /
• 2012

D2D(Device-to-Device) 통신은 이동통신망을 기반으로 동작할 경우 이동통신망의 자원을 재사용함으로써 주파수 자원사용의 효율성을 높일 수 있다. 그러나 D2D 통신 단말(DUE; D2D user equipment)이 이동통신망의 자원을 재사용하는 경우 동일자원을 사용하는 이동통신개체와 DUE 간 및 D2D 통신 쌍 간에 신호 간섭이 발생할 수 있어 이를 고려한 자원할당기법에 대한 연구가 필요하다. 본 논문에서는 다수의 DUE가 이동통신망의 상향링크 자원을 다중으로 재사용할 때 이동통신개체 및 DUE가 달성가능 한 주파수 효율을 고려하여 DUE에게 자원을 할당함으로써 셀 수율을 향상시킬 수 있는 자원할당 기법을 제안한다.

• Proceedings of the Korean Journal of Food and Nutrition Conference
• /
• 2001.12a
• /
• pp.128-128
• /
• 2001

전통 한약재의 일환인 황기, 당귀로부터 추출물의 획득은 일반적으로 열수추출법에 의하여 행해져 왔으나 추출물의 획득수율이 낮고 추출, 농축과정에서의 심란 열처리로 인하여 고유의 향이 소실되는 등 많은 문제점을 안고 있다. 이에 본 연구에서는 주정추출법을 시도하여 황기, 당귀 추출물의 획득수율을 열수추출법의 50, 39%(w/w) 대비 각각 15. 36% 증가한 65. 75%로 향상시킬 수 있었으며, 강한 고유의 향을 포집하고 있는 전혀 새로운 타입의 추출물을 얻을 수 있었다. 추출과정on서 열수추출법과의 차이는 추출용매를 물에서 주정으로 변경한 것과 1차 추출 후 얻어진 박을 이용하여 2차 추출을 행하였으며, 농축온도를 열수추출의 104$^{\circ}C$에 비하여 상대적으로 낮은 9$0^{\circ}C$에서 실시하였다. 이와 같이 처리온도와 거의 무관하게 주정은 고유의 향을 포집하는 뛰어난 효과를 나타내었다. 이 추출물을 물엿, 음료 등의 제품에 적용할 경우 별도의 인공향료 처리 없이 천연물 그대로의 가공으로도 충분한 고유의 향미를 부여할 수 있을 것으로 기대된다.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.288-296
• /
• 2017

In this study, the effect of spray-drying conditions and surfactant addition on the spray-drying yield, morphological characterization, size distribution and re-dispersity in water of spray-dried lignocellulose nanofibril (LCNF) were investigated. The freeze-dried LCNF after solvent exchange had linear fiber morphology with a diameter of 70-300 nm, and the spray-dried LCNF showed rod-like particle morphology. The spray-drying yield and particle size of spary-dried LCNF at $140^{\circ}C$ was highest and smallest, respectively. As LCNF concentration and blowing rate decreased and increased, respectively, the spray-drying yield and particle size were increased. The highest spray-drying yield was found at distearyl dimethyl ammonium chloride (DDAC) addition of 10 phr at $140^{\circ}C$. As the particle size decreased and the DDAC content increased, filtration time of spray-dried LCNF in water was decreased and increased, respectively.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.741-744
• /
• 2001

• Proceedings of the Safety Management and Science Conference
• /
• 2006.04a
• /
• pp.157-182
• /
• 2006

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2000.11a
• /
• pp.104-104
• /
• 2000