• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2004.11a
• /
• pp.115-117
• /
• 2004

제주시 지역 대기부유분진의 입경별 조성특성을 살펴보기 위하여 제주시청 별관 옥상에서 다단계 분진 포집기(8-stage non viable cascade impactor)를 사용하여 대기부유분진을 채취하여 분진의 질량농도 및 수용성 이온성분의 입경분포를 조사하였다. 조사결과 제주시 지역의 대기부유분진은 0.9, 5, $9.5{\mu}m$부근에서 peak를 보이는 삼산형분포(tri-modal distribution)를 나타내었고 $Na^+,\;Ca^{2+},\;Mg^{2+}$ 및 $Cl^-$와 같이 주로 해염에 기인하는 이온 성분들은 $2.1{\mu}m$이상의 조대입자 영역에 존재하고 있었으며 주로 $4{\mu}m$와 $9.5{\mu}m$부근에서 peak를 보였다. $NH_4^+,\;K^+,\;SO_4^{2-}$는 $2.1{\mu}m$이하의 미세입자 영역에 존재하고 있으며 $NO_3^-$의 경우는 계절에 따라 약간의 차이가 있긴 하지만 주로 0.9, 4, $9.5{\mu}m$에서 peak를 나타내고 있다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1998.10a
• /
• pp.246-247
• /
• 1998

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1992.05a
• /
• pp.28-28
• /
• 1992

브라디키닌은 체내에서 강력한 혈관 확장 작용을 일으키는 autacoid(local hormone)로서 혈압의 항상성 유지, 모세혈관 투과성 증진, 염증 및 통증 반응 등에 관여하고 여러 장관 평활근을 수축시킨다. 또한 septic 혹은 endotoxic shock의 여러 원인 물질로도 생각되어진다. 최근 rhinovirus로 인한 감기의 제증상 원인 물질로도 브라디키닌이 주목을 받고있다. 이와같이 브라디키닌온 다양한 질병에 있어 중요한 원인 물질로 여겨지므로 브라디키닌 길항제들은 한두 질병의 치료제로 개발될 가능성이 높음이 강력히 제시되고 있는 실정이다. 이의 개발을 위해서 브라디키닌 수용체에 대한 연구는 필수적이라고 할 수 있다. 본 연구는 두 부분으로 나누어 진행중인데 첫째, 이제까지 보고된 브라디키닌 길항 물질들은 대부분이 브라디키닌의 특정 아미노산 잔기를 치환시킨 펩타이드 유도체로서 이들을 경구 투여시 peptidase어 의하여 쉽게 분해되고 또한 부분적인 효능제 활성을 갖는 불리한 점을 감안하여, 비펩타이드성 브라디키닌 길항제를 개발할 목적으로 한방 및 민간에서 자주 사용되어온 생약중에 브라디키닌 작용에 선택적 길항효과가 있는 물질을 검색한 바 활성을 보인 황금으로부터 작용 성분을 추적중에 있다. 둘째, 브라디키닌 수용체를 순수하게 분리 정제하기 위한 첫 단계로서 이 수용체의 결합시험(binding assay) 방법을 확립하고 더불어 여러 조직내(흰쥐의 여러 기관, 토끼 및 사람의 신장)의 브라디키닌 수용체의 분포를 파악하는 일이다. 횐쥐 조직의 실험 결과로부터 신장에 브라디키닌 수용체가 많이 분포함을 확인되었고 향후 토끼 신장으로부터 동수용체를 분리하고자 한다. 또한 토끼 신장의 근위세뇨관일차배양세포을 이용하여 브라디키닌의 신장에서의 작용기전도 살펴보고 있다.+}$, $Na^{+}$, NH$_{4}$$^{+}$ 및 H$^{+}$) 수용액 메디움에서의 Cd(II), Mg(II) 및 Zn(II)의 Dowex 1-X8, Cl$^{-}$ 수지에 대한 흡착은 역시 어떤 메디움에서도 Cd(II) 흡착이 제일 크며, 다음이 Zn(II) 이고 착이온을 형성않는 Mg(II)이 제일 작았다. 한편 메디움 종류별 D값의 크기순위는 H$^{+}$>K$^{+}$> $Na^{+}$>NH$_{4}$$^{+}$이였다. 메디움의 종류에 따라 D값의 차이가 나는 것은 금속이온의 착이온 형성과 금속이온의 용액내에서의 이온종의 상태와 관련이 있다고 생각된다. 마. MCl(M:K$^{+}$, $Na^{+}$, NH$_{4}$$^{+}$ 및 H$^{+}$)과 MNO$_{3}$ 용리액에 의한 Cd(II), Mg(II) 및 Zn(II)의 용리는 예상한 바와 같이 MCl에서 작은 Dv 값을 갖는데, 이것은 CdCl$_{4}$$^{2-}$ 착이온을 형성하거나 ZnCl$_{4}$$^{2-}$ , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$$^{+}$의 경우

• Korean Journal of Agricultural Science
• /
• v.27 no.2
• /
• pp.135-140
• /
• 2000

The mobility of sulfate in soils defends on several factors including redox potential, soil mineralogy, pH, and the presence of other anions that compete for sorption sites with sulfate. The proposed model of adsorption mechanism for sulfate postulated that reaction is between anions in solution and charged surfaces of soil particles. With appropriate choice of parameters obtained from the adsorption-desorption experiments, the equation of transport model adapt an empirical approach, capable of handling most general equilibrium adsorption isotherms, suitable for multispecies systems.

• Analytical Science and Technology
• /
• v.23 no.6
• /
• pp.566-571
• /
• 2010

This paper describes the sorption behaviors of aqueous uranium ions on the K-birnessite. K-birnessite was synthesized by adding a concentrated HCl to an aqueous solution of $KMnO_4$. Physicochemical characteristics of the K-birnessite, such as structure, specific surface area and surface charge, were investigated. K-birnessite is a layered material and the $K^+$ ions exist in the interlayer of layered K-birnessite. BET specific surface area of the K-birnessite was 38.30 m2/g. The surface charge of K-birnessite was $-1.65\;C/m^2$ at pH 5.00 and ionic strength of 0.010 M $NaClO_4$, at which the sorption experiments of uranium ions were carried out. Uranium ions were incorporated into the interlayer of the K-birnessite by cation-exchange reaction with $K^+$ ions, and the distribution coefficient is quite similar to those of common ion-exchange materials. The results might be applicable in the retardation of migration of radioactive materials from the underground disposal site of high-level radioactive waste.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.11
• /
• pp.735-742
• /
• 2012

This study tried to find a suitable method for enhancing the foam stability of cationic surfactants that normally generate less foam or no foam. Several trials were made to enhance the foam stability: addition of anionic surfactant, colloids and polymer. Cationic starch (CA-ST) did not form foam at all, while the foam stability of two other cationic surfactant also showed low levels; methyl triethanol ammonium methyl sulfate distearyl ester (CEQ90) for 46 sec. and Cetyl trimethyl ammonium chloride (CM29) for 31 seconds. Foam stability of cationic surfactants were significantly affected by addition of anionic surfactant, sodium dodecyl sulfate (SDS). Foam stability of CA-ST was significantly enhanced by addition of SDS, while those of CEQ90 and CM29 were decreased. Addition of colloids ($SiO_2$, kaolin) and polyvinyl alcohol (PVA) enhanced foam stabilities of CEQ90 and CM29. However, CA-ST did not form foam even in the presence of colloids or PVA. Effect of simultaneous addition of colloids and anionic surfactant on foam stability of cationic surfactant showed that foam stability of cationic surfactant was more influenced by addition of anionic surfactant than colloids. Effect of simultaneous addition of PVA and anionic surfactant on the foam stability of cationic surfactant also showed that presence of anionic surfactant significantly affect the foam stability of cationic surfactant. Foam stability of CA-ST was greatly increased to 8,780 seconds by addition of SDS 0.14% and PVA 2.5%. The foam stability of CA-ST was 8 times higher than CEQ 90. This study suggested that cationic surfactants not forming foam can generate foam by addition of anionic surfactant and its stability can be additionally increased by addition of colloids and PVA. The study results showed that enhancement in foam stability of cationic surfactant was prominently affected by the concentration of anionic surfactant added.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2006.04a
• /
• pp.364-365
• /
• 2006

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1998.10a
• /
• pp.292-294
• /
• 1998

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1995.04a
• /
• pp.80-81
• /
• 1995

• Journal of the Korean Chemical Society
• /
• v.43 no.2
• /
• pp.172-181
• /
• 1999

To develop the manufacturing technique for the powder builder of amorphous solid types, the water glass mixed with caustic soda dispersed into the methanol. Thus soluble sodium silicate was made a form of amorphous solid powder. In order to examine characteristics of water soluble sodium silicate $SiO_2/Na_2O$ mol ratio, we investigated solubility, thermogram, SEM, and BET analysis. pH buffering capacity, calcium-ion binding capacity as temperature change, and surfactant loading capacity were examined for characteristics as laundry detergent builder. $SiO_2/Na_2O$ molar ratio of soluble sodium silicate was 1.0, 2.4, 2.8, and zeolite was used in order to investigate basic characteristics of laundry detergent builder. Silicate used with laundry detergent was good for pH buffering capacity and solubility. But calcium-ion binding capacity and surfactant adsorption ability were lower. $SiO_2/Na_2O$ mol ratio became higher, pH buffering capacity and ion exchange ability were lower and surfactant adsorption ability was a little higher.