• Korean Journal of Optics and Photonics
• /
• v.31 no.6
• /
• pp.259-267
• /
• 2020

We evaluate the degradation of receiver sensitivity induced by direct and indirect exposure to solar irradiance in free-space optical communication systems. For this purpose, we calculate the variances of numerous noise components arising from solar irradiance, and then estimate the receiver sensitivity penalties for intensity-modulation/direct-detection and coherent systems. The results show that the penalties are less than 1.3 dB when indirect sunlight impinges on the detector, regardless of the system. However, the sensitivity penalties are estimated to be larger than 30 dB when the sunlight is directly incident upon the receiver. These penalties are barely reduced if we insert an optical polarizer, or if we adjust the bandwidth of an optical filter at the receiver to be as narrow as the signal's bandwidth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1159-1166
• /
• 2006

In this paper, we have designed a RFID reader receiver system for improving the performance of the passive Tag based 9$'908.5{\sim}914MHz'$ RFID reader, and analyzed the system performance according to the frequency, the reader, and tag properties. The commercial receive system causes a loss in sensitivity because of 24 capacitors and 6 inductors. So we have designed an improved system using a circulator, LNA and a SAW filter. The experimental results show that the use of a circulator to separate the Tx/Rx paths eliminates interference, the LNA improves the sensitivity of the Rx module and SAW filter eliminates the noise and spurious components in the received signal.

• Journal of Advanced Navigation Technology
• /
• v.9 no.2
• /
• pp.109-120
• /
• 2005

In this paper, bit error rate (BER) characteristics, sensitivity and minimum allowable launching power are numerically investigated as a function of amplifier spacing that consisted of 1,200 km WDM systems with MSSI method. It is conformed that the sensitivity and minimum allowable launching power are gradually degraded as amplifier spacings are gradually expanded, but those are not largely affected by modulation format. The sensitivity of RZ transmission system is smaller than that of NRZ transmission system, but minimum allowable launching power of NRZ transmission system is smaller than that of RZ transmission system. And, it is confirmed that the best amplifier spacing in NRZ and RZ transmission system is less than 50 km, because the sensitivity and minimum allowable launching power are less affected by fiber dispersion, channel wavelength and pump light power.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.2
• /
• pp.200-206
• /
• 2019

In this paper, the characteristics of receiving voltage sensitivity about acoustic package in towed array sonar is analyzed through the numerical simulation and design of experiments. Simulation results show that the variation of receiving voltage sensitivity is caused by the structural resonance mode shape on baseline acoustic package. The effect of design parameters of the acoustic package are analyzed through the design of experiments to reduce the deviation of receiving voltage sensitivity. A change of hydrophone shield can thickness (t) is the greatest effect on the deviation of receiving voltage sensitivity. As a result of water tank test, the acoustic package derived from the design of experiments has reduced deviation of receiving voltage sensitivity.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.189-197
• /
• 2012

In this paper, we propose an optimal path search algorithm that applies the received signal strength between a mobile device and a satellite. Because the common path search algorithm is only based on the shortest path search, it is difficult to provide stable multimedia services for the satellite mobile devices. The proposed algorithm provides the stable communication environment for the satellite mobile devices based on received signal strength. In Satellite communications, changes in the radio quality are severe depending on the receiving environment. Therefore, an accurate analysis of the receiving environment characteristics is very important for providing stable multimedia services of satellite communications. The causes of radio attenuation are atmosphere attenuation, vegetation attenuation and buildings attenuation. These factors were applied to analyze the received signal strength. The proposed algorithm can search the optimal path in urban for stable satellite multimedia services.

• Journal of Advanced Navigation Technology
• /
• v.12 no.5
• /
• pp.483-493
• /
• 2008

For effective wireless localization utilizing signal strength measurements based on IEEE 802.11 WLAN standard diversity of mobile hardware, characteristics of is one of the important problems to be considered for advanced location-based services. For improved accuracy regardless of a bias originating from the mobile hardware characteristics, this paper proposes a new localization algorithm, which is named as the hybrid Kriging algorithm. To evaluate the performance characteristics of the proposed algorithm, simulation and experiment results are illustrated. By the simulation and experiment result, the proposed algorithm is more accurate than the well-known location finger-print method given the same density of reference measurements.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.3
• /
• pp.60-67
• /
• 2011

Visible light communication system transmits data by controlling light emission of LED and receives data through photo detecter, which is considered as one of strong candidates of next generation wireless communication systems. The transmission capacity of visible light communication system depends on light intensity emitted from LED, sensitivity of PD, distance between transmitter and receiver, angle of incidence at the receiver. In particular, the receiver's vertical and horizontal movement changes distance between transmitter and receiver and angle of incidence, which may degrades transmission capacity of system. In this paper, we propose an estimation algorithm of receiver's position and angle based on tracking of received light intensity for indoor visible light communication systems. The performance evaluation of proposed algorithm confirms that the estimation algorithm of receiver's position and angle is quite important for visible light communication system to improve its transmission capacity.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.250-253
• /
• 1997

The effect of dispersion in optical transmission system changes according to chirp and SPM. Chirp depends on the modulation condition of an external modulator. SPM is proportional to signal power. In this paper, we analyzed the pulse broadening due to SPM and chirp in the system with dispersion by using Split Step Fourier Method and calculated the optimum chirp parameter for 400 km transmission system. Experimental results are presented also.

• The Journal of the Korea Contents Association
• /
• v.15 no.8
• /
• pp.9-17
• /
• 2015

One of RFID features is that each RFID tag has a unique identifying code. Logistic System utilizes RFID tag as location tracing, understanding stock or etc. On the other hand, there is a problem of overall lower recognition rate by getting the information of non-mobility tags with no need for reading. To solve this problem, we trace and analyze variation of moving and moveless RFID tag sensitivity by the hour. In analyzed data, we verify that tag sensitivity of mobile RFID is gradually increase while non-mobility tag has same intensity value. In order to detect mobile tag, we generate a function using Matlab with analyzed data and separate moving tags from non-mobility tags by software. As a result, we can confirm that non-mobility tags are detected by software and recognition rate of RFID tag is improved by separating moveless tag.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1789-1793
• /
• 2008

전자파표면유속계는 홍수유속측정을 위하여 개발된 기기로 평 갈수기에는 유속측정이 불가하여 프로펠러 유속계를 이용하고 있다. 현재 보급된 전자파표면유속계는 하천의 흐름방향에 나란하게 설치하였을 때에만 유속을 측정할 수 있는 기기의 구조상의 한계성 때문에 교량이 없는 지점에서는 유속측정이 불가하여 유량산정을 할 수가 없다. 또한 편각측정이 불가능하여 기기를 각 측선마다 이동 설치하여야 하기 때문에 유속측정시 효율성 떨어진다. 이에 홍수시 유량측정의 효율성을 증대시키고 전자파표면유속계의 활용도를 높이고자 편각측정이 가능하도록 전자파표면유속계의 성능을 개선하는 것이 본 연구의 주된 목적이다. 전자파표면 유속계에서의 편각 측정은 하천의 유속방향을 기준으로 정면에서 측정하면 수평 편각이 0도가 되며 좌우로 안테나를 회전하여 움직인 각도가 측정 편각으로 결정된다. 현장에서 전자파표면유속계의 사용시 편의성을 높이고 유량측정을 효율적으로 하기 위해서는 가급적 편각을 크게 해서 측정을 해야 하지만, 편각이 증가하면 전자파의 물리적 특성 때문에 반사된 신호의 수신 크기가 감소하여 측정이 불가능하게 된다. 이러한 문제를 해결하기 위해서는 유속 측정시 전자파 출력을 기존의 시스템보다 높게 물표면에 발사하여야 하며 안테나를 포함한 RF 모듈의 수신감도 및 지향성이 개선되어야 한다. 이에 편각측정이 가능하도록 이러한 사항에 주안점을 두어 새로운 시스템을 구성하였다. 수신감도 향상을 위해서는 물표면에 반사되어 돌아오는 신호를 가장 먼저 수신하는 안테나의 특성이 중요하며 그 다음 수신용 증폭기, IF 증폭기 순으로 개선이 필요하다. 본 연구에서는 안테나의 형태를 기존 파라볼릭 안테나에서 위상 배열 평면안테나로 변경하였으며, 이에 따른 이점으로는 송수신부를 분리하여 하나의 평면에 두 개의 안테나를 구성할 수 있다는 사항이다. 즉 외형적으로는 하나의 안테나로 보이지만 두 개의 안테나가 하나로 구성된 것이다. 송수신부를 분리하는 형태는 기존 파라볼릭 안테나에선 불가능한 구조로 변경에 따른 수신감도 향상은 수치적으로 10dB 이상 개선하였다. 송수신부 분리가 수신감도에 영향을 미치는 이유는 물표면으로 발사된 송신 신호의 일부가 수신단으로 유입되는 현상으로 누설되는 송신 신호를 최대한 차단하는 분리도가 수신 신호 검출에 직접적인 양향을 주기 때문에다. 평면 안테나를 적용하면 기존 파라볼릭 안테나에서 사용하던 써큘레이터라는 부품을 삭제할 수 있으며, 안테나의 구조적인 분리를 통해서 수신감도를 개선할 수 있었다. 안테나의 지향성은 발사하는 전자파의 빔폭 성능과 일치하며 각도 단위로 표시한다. 각도 값이 작을수록 전자파의 에너지가 한 곳에 집중된다고 말할 수 있다. 즉 빔폭이 크면 측정시 반사면적이 커져 정확한 지점의 유속을 측정하기 어려운 문제가 발생한다. 본 연구를 통해 빔폭은 기존 안테나 대비2도를 개선하였으며 25%의 개선 효과를 얻었다. 또한 수신감도 및 지향성 개선과 더불어 전자파의 출력을 기존 장비 대비하여 1.6배를 증가하여 편각측정을 위한 전자파표면 유속계의 성능을 개선하였다.