• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.4
• /
• pp.213-219
• /
• 2021

The submarine's intercept pulse detection detects pulses radiated from enemy surface ships, submarines, and torpedoes, and performs an important function of providing maneuverability and survivability of submarine. Whether or not the intercept pulse is detected is determined by comparing the size of the received pulse with the threshold value by the operator. In the case of intercept pulses, the intensity of the pulses is frequently reduced under the influence of various environmental factors. In the situation, if detection is performed with a fixed threshold, a non-detection problem occurs and persists until the operator sets a low threshold. In this paper, we proposed method for automatically adjusting threshold to reduce the non-detection problem caused by a fixed threshold. Simulation were preformed on 4 cases with different pulse level fluctuation widths, and it was confirmed that the detection performance was improved by increasing the number of detections when a method for automatically adjusting threshold was applied to all cases. Through the proposed method, it is expected that the intercept pulse detection performance will be improved in the marine environment the large fluctuations in pulse level in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.3
• /
• pp.422-429
• /
• 2022

In this paper, the intermediate frequency transmission signal level between the network system-based baseband and RF unit consisting of multi-channel airborne relay devices and a lot of mission devices, which are currently undergoing technology development tasks, is kept constant at the reference signal level. Considering the other party's receiving input range, despite changes in the short-range long-range wireless communication environment, it presents a multi-link protection and MLP-A algorithm that allows signals to be transmitted stably and reliably through signal detection automatic gain control, and experiments and analysis considering short-distance and long-distance wireless environments were performed by designing, manufacturing, and implementing RF units to which MLP-A algorithms were applied, and applying distance calculation equations to the configuration of multiple air movements and verification networks. Through this, it was confirmed that a stable and reliable RF communication system can be operated.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.3
• /
• pp.49-56
• /
• 1993

This paper describes design and implementation of signal transmission system using LCX as communication media, which has characteristics of high reliability easy for expansion and complex transmission of voice, data and video signal in Electric culvert. In this system, we estimated system performance as result of variable transmission characteristics test. In case of voice signal, transmission loss characteristics improved 5-10(dB] than designed Values in received signal level. In the test of speech quality estimation, we obtained satisfactory result as speech intensity = 3 (QSA value), speech atriculation = 4 (QRK value). As for data and video signal transmission, communication success rates were 981% 1 in monitoring and control functional test. As a result of transmission characteristics test in transmission line and system, transmission range by LCX communication system without repeater can reach in 6Km. This paper presents basic construction method using LCX communication system for total management in Electric culvert.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1799-1807
• /
• 2016

In this paper, we propose the automatic demand response systems which reduce the electric power consumption for the period automatically distinct from the existing passive demand response that a subscriber directly controls the energy consumption. The proposed systems are based on SEP 2.0 and consist of the demand response management program, the demand response server, and the demand response client. The demand response program shows the current status of the electric power use to a subscriber and supports the function which the administrator enables to creates or cancels a demand response event. The demand response server transmits the demand response event received from the demand response management program to the demand response client through SEP 2.0 protocol, and it stores the metering data from the demand response client in a database. After extracting the data, such as the demand response the start time, the duration, the reduction level, the demand response client reduces the electric power consumption for the period.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.3
• /
• pp.509-516
• /
• 2018

TCP is a well-known communication protocol which is widely used for reliable message transmissions. The urgent mechanism of TCP plays a key role to transmit messages with a high priority. If a high priority message occurs at the transmitting node, the urgent mechanism informs the receiving node about the presence of a high priority message prior to its transmission so that the receiving node can be prepared for handling this message in advance. This implies that the existing urgent mechanism of TCP does not guarantee an immediate or faster delivery of the high priority message itself. Therefore, the ability of priority-based transmission is required on TCP not only to ensure reliable transmissions of normal messages but also to offer a differentiated service according to the priority of message. This paper presents a priority-based transmission algorithm over TCP using a priority queue in a multi-threaded environment. The effectiveness of the proposed algorithm is explored using an experimental setup in which various messages with different priority levels are transmitted.

• Journal of Satellite, Information and Communications
• /
• v.4 no.1
• /
• pp.36-44
• /
• 2009

The key technologies of GNSS receiver for GNSS sensor station are under development as a part of a GNSS ground station in ETRI. This paper presents the GNSS receiver implementation and signal processing result which is implemented based on FPGA to process the Galileo E1 and E5 signal. To verify the working and performance for GNSS receiver which is implemented based on FPGA, live signal received from GIOVE-B which is second test satellite is used. We gather GIOVE-B signal by using prototyping antenna and RF/IF units including IF-component. To verify Galileo E1 and E5 signal processing function from GIOVE-B, FPGA based signal processing module is implemented as a prototyping hardware board.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9A
• /
• pp.1265-1275
• /
• 1999

An adaptive MMSE detector can be used to cancel the MAI in CDMA system. But standard adaptive MMSE detector cannot be used in real mobile environment due to fast fading channel. Furthermore multipath reception make it more difficult to converge to optimum weight values. In this paper we discuss and model the multipath fading environment in Forward-link Synchronous CDMA channels and propose adaptive MMSE RAKE detector structure which can be applied in the mobile station. A proposed adaptive MMSE detector requires estimation of received signal delay and complex channel coefficients such as amplitude and phase variation. These burden can be solved by utilizing the common pilot channel. The pilot channel may have higher power than the traffic channel, which give more exact channel estimation. Moreover RAKE structure gives more accurate and stable result which can be used as reliable reference signal in multipath fading channel environment. With this structure, conventional adaptive algorithm such as LMS or NLMS can be applied in adaptive MMSE detector.

• Journal of Digital Convergence
• /
• v.11 no.4
• /
• pp.229-234
• /
• 2013

The purpose of this study is to develop a lighting apparatus of the illuminance and color temperature to maximize the ability of the optimal combination of light sources that can be controlled efficiently control device. Finding people comfortable feeling for indoor lighting that can be used in a variety of color temperature illumination area by combining light sensitivity can be realized. Lighting apparatus for fluorescent lamps with different color temperature of 2000K and 8000K, and by varying the quantity of each of the fluorescent lamps, the illuminance of lighting equipment and color temperature through optical simulations were evaluated. By infrared remote control receiver, divided into 5 types of relaxation, conversation, meeting, hospitality, arts and the lighting environment you want to transfer the PC0 ~ PC4 through the parallel port on the mode selected by the user at the receiving end the DC voltage output. EEFL inverter input DC voltage and the DC input voltage, depending on the level of EEFL dimming value (illuminance and color temperature) lighting environment you want to create change while using a PIR sensor EEFL automatically turn off if people do not have was developed so that the power consumption so you can save.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6A
• /
• pp.499-509
• /
• 2005

The capacity of Satellite DMB(Digital Multimedia Broadcasting) system is limited mainly by the interference. So, to achieve the expected performance of Satellite DMB system and to minimize the interference from other Satellite DMB system, ACI(Adjacent Channel Interference) should be considered carefully. Satellite DMB system uses the Gap-filler for effective transmission in terrestrial environment, and the Gap-filler can use direct amplification or frequency conversion to satisfy the specific requirements. Therefore, amplified signal causes several effects on interference between System A(Eureka 147 DAB) and System E(ISDB : Integrated services Digital Broadcasting). In this paper, by using the outcome of system-level simulation considering the results of link-level simulation, we analyze the interferences between System A and System E under practical situation based on the exact parameters of ITU-R BO. 1130-4. We also propose the appropriate level of guard band and Cell Radius to optimize system capacity by adapting the spectrum mask given in the spec. and utilizing the interference analysis between System A and System E.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.119-124
• /
• 2014

In this paper, A GSm/WCDMA band antenna which can be confirmed positioning information of a container by using the GPS/GLONASS bands on one board and can be sent the positioning information to the mobile communication network in real time is designed. A microstrip patch antennas which supports dual-band (GPS and GLONASS) was optimized. The antenna size is $25{\times}25{\times}5[mm]$. A chip monopole antennas which supports dual-band (GSM and WCDMA) was optimized. The antenna size is $27{\times}8{\times}3.2[mm]$. To amplify the Satellite reception signal level, two-stage low noise amplifier(LNA) was designed. The LNA gain is 27[dB]. The size of Jig for antennas measuring is $100{\times}30{\times}1[mm]$.