• Journal of the Korean Chemical Society
• /
• v.27 no.1
• /
• pp.38-45
• /
• 1983

Aziridine derivatives were utilized for the formation of aziridine N-oxides at low temperature, which were subject to easy decomposition and/or rearrangement like the protonated aziridines at room temperature. t-Butyl nitroso compound formed by the decomposition of N-oxide is easily characterized by its blue color and it is the major product in case that no branched alkyl groups are substituted on the carbon atoms of the aziridine ring and the stationary groups on the nitrogen are inert to rearrange the oxide such as the t-butyl group. The oxidative rearrangement products, however, are mainly formed when the substituents are methyl or ethyl group on the carbon atoms. It is interesting to see that the sigmatropic rearrangement of 2-ethyl aziridine gave only cis olefinic compound selectively in case that t-butyl group was substituted on the nitrogen, whereas N-hydroxy aziridine compounds were formed exclusively when t-butyl group was replaced with ethyl group.

• The Journal of Natural Sciences
• /
• v.14 no.2
• /
• pp.41-54
• /
• 2004

$LaMnO_3$ and A site substituted $La_{0.9}Sr_{0.1}MnO_3$(a=$5.33\AA$, c=$13.27\AA$), B site substituted $LaMn_{0.9}Cu_{0.1}O_3$(a=$5.52\AA$, c=$13.31\AA$) mixed oxides were prepared by Citrate sol-gel method. The powder X-ray diffraction patterns of these oxides were indexed with single phase hexagonal perovskite structures. According to the TRR result, oxygen stoichiometry of these oxides were oxidative nonstoichiometry as like $LaMnO_{3.16}$, $La_{0.9}Sr_{0.1}MnO_{3.10}$ and $LaMn_{0.9}Cu_{0.1}O_{3.14}$ Reduction reactions of un-substituted $LaMnO_3$ was two steps, but specific site(A site of B site) partially substituted $LaMnO_3$ oxides were procees to three reactions.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.4
• /
• pp.351-356
• /
• 2007

The crystal structure of $Li(ND_4)SO_4$ was analyzed by X-ray and neutron diffraction methods. The crystal is a deuterated $Li(NH_4)SO_4$ and one of the ferroelectric materials with hydrogen atoms. The crystal is orthorhombic at room temperature, $P2_1nb$, with lattice parameters of $a=5.2773(5)\;{\AA},\;b=9.1244(23)\;{\AA},\;c=8.7719(11)\;{\AA}$ and Z=4. Neutron intensity data were collected on the Four-Circle diffractometer (FCD) at HANARO in Korea Atomic Energy Research Institute and X-ray date were given by Prof. Y. Noda of Tohoku University Japan. The structure was refined by full-matrix least-square to final R value of 0.070 for 1450 observed reflections by X-ray diffraction and to final R=0.049 for 745 observed reflections by neutron diffraction. With X-ray data we obtained only one hydrogen atomic position. However, not only all atomic positions of four hydrogen atoms at $NH_4$ but also the occupation factors of D and H were refined with neutron data. From this results we obtained the average chemical structure of this sample, $LiND_{3.05}H_{0.95}SO_4$.

• Journal of the Korean Chemical Society
• /
• v.37 no.2
• /
• pp.249-254
• /
• 1993

N-p-nitrophenyl poly(m-phenylene isophthalamide) was obtained from treatment of poly(m-phenylene isophthalamide) with sodium hydride in dimethyl sulfoxide followed by the addition of 1-fluoro-4-nitrobenzene in 43 wt% yield. Its inherent viscosity was 0.606 g/cm${\cdot}$sec determined from a solution of 0.125 g of the above polymer dissolved in 25 ml of 98% sulfuric acid at $30^{\circ}C.$ In order to synthesize poly(m-phenylene isophthalamide), 1,3-phenylenediamine is allowed to react with isophthaloyl chloride in chloroform in the presence of triethylamine and added triethylamine hydrochloride. The value of inherent viscosity is 0.560 g/cm${\cdot}$sec measured at the same condition. The substitution ratio of N-p-nitrophenyl poly(m-phenylene isophthalamide) was to be 16.7∼47.0% by using the $^1H-NMR$ integration. When the higher inherent viscosity of poly(m-phenylene isophthalamide) was used, lower substitution ratio would be calculated.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.1 no.2
• /
• pp.115-119
• /
• 1968

1. The basic investigations on soil textures, water holding capacity, pH, exchangeable calcium, and organic matter contents in four species bed were conducted in order to improve the natural flat for the bivalve beds. 2. It was statistically significant that there were differences in the soil textures among all beds of four species, D. japonica, C. sinensis, M. veneriformis, and T. philippin-arum. 3. There was no significant difference in water holding capacity, pH, and exchange-able calcium contents among different bivalve beds statistically, 4. It was highly significant that there were diffences in soil organic matter content among all groups of beds except that of D. japonica - C. sinensis. 5. It is considered that that soil textures and soil organic matter contents are most important factors to restrict the distribution of each species bivalve within a certain limited area of tidelands.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.2
• /
• pp.136-141
• /
• 2005

Li-doped NiO was synthesized by molten salt method. $LiNO_3$-LiOH flux was used as a source for Li doping. $NiCl_2$ was added to the molten Li flux and then processed to make the Li-doped NiO material. Li:Ni ratios were maintained from 5:1 to 30:1 during the synthetic procedure and the Li doping amount of synthesized materials were found between 0.086-0.190 as a Li ion to Ni ion ratio. Li doping did not change the basic cubic structural characteristics of NiO as evidenced by XRD studies, however the lattice parameter decreased from 0.41769nm in pure NiO to 0.41271nm as Li doping amount increased. Hydrogen gas sensors were fabricated using these materials as thick films on alumina substrates. The half surface of each sensor was coated with the Pt catalyst. The sensor when exposed to the hydrogen gas blended in air, heated up the catalytic surface leaving rest half surface (without catalyst) cold. The thermoelectric voltage thus built up along the hot and cold surface of the Li-doped NiO made the basis for detecting hydrogen gas. The linearity of the voltage signal vs $H_2$ concentration was checked up to 4% of $H_2$ in air (as higher concentrations above 4.65% are explosive in air) using Li doped NiO of Li ion/Ni ion=0.111 as the sensor material. The response time T90 and the recovery time RT90 were less than 25 sec. There was minimum interference of other gases and hence $H_2$ gas can easily be detected.

• Journal of the Korean Chemical Society
• /
• v.39 no.11
• /
• pp.837-841
• /
• 1995

Thermodynamic parameters for the hydrogen bonding between thiopropionamide(TPA) and proton donors such as triethylphosphine oxide(TEPO), triphenylphosphine oxide(TPPO), trimethylphosphate(TMP), and tributyl phosphate(TBP) in dilute carbon tetrachloride solution have been measured by near-IR spectroscopy. The νa + amide Ⅱ combination band of TPA has been resolved into two Lorentzian-Gaussian product components which have been identified with monomeric TPA and 1 : 1 hydrogen bonded complex. The equilibrium constants and thermodynamic parameters for the formation of 1 : 1 hydrogen bonded complex have been obtained by the analysis of concentration and temperature dependent spectra. The standard enthalpies for the 1 : 1 hydrogen bonded complex formation of TPA with TEPO, TPPO, TMP, and TBP in CCl4 have been found to be - 21.4, - 16.8, - 12.8, and - 12.9 kJ/mol, respectively. The results are explained by the inductive and steric effects of substituents.

• Applied Biological Chemistry
• /
• v.39 no.2
• /
• pp.140-146
• /
• 1996

Imidacloprid and a series of the related compounds were synthesized, and influence of 3-N substituents(R) on the insecticidal activities against Brown plant hopper(Nilaparvata lugens) and Green peach aphid(Myzus persicae) were examined quantitatively from the structure-activities relationships(Shh) techniques. The results indicated that the molecular hydrophobicity$({\pi})$ and inductive substituent constant$({\sigma}^{\ast})$ of substituents(R) at 3-nitrogen position on the imidazolidine ring were important factors. Variations in the potency were parabolically related to the both constants. In case of Brown plant hopper, optimum value of ${\pi}$ constant was 0.52, whereas the value of ${\sigma}^{\ast}$ constant against Green peach aphid was 1.17, respectively. Among them, the strong electron withdrawing groups$({\sigma}^{\ast}>0)$ such as methyl and benzenesulfonyl group(7 & 8) showed lower insecticidal activity and non-substituted, 1(imidacloprid) showed the best insecticidal activity. It seems that the intramolecular associated(H-bond) form between 2-N-nitro group and 3-imid group may contribute to the higher insecticidal activity to the both sucking insects. And in aqueous solution, 1 showed higher residual activity below pH 6.0, and the half-life$(T_{1/2})$ was about 6 month at pH 7.0 $(ca.\;k_{obs.}:5{\times}10^{-8}sec.^{-1})$ and $45^{\circ}C$.

• Journal of the Korean Magnetics Society
• /
• v.7 no.1
• /
• pp.25-30
• /
• 1997

Physical and magnetic behaviors of reduced Co-Zn-Ti-Sn substituted Ba-ferrite particles with hydrogen are different from those of reduced-pure Ba-ferrite particles. The coercivity of substituted Ba-feffite particles shows a peaking effect with the reduction temperature ranging from 250 to 520 $^{\circ}C$, while the coercivity of pure Ba-ferrite decreases monotonically. The reduction process of substituted Ba-ferrite has been found to be devided into three steps. At the first and second steps, the magneto-plumbite structure maintained. When the reduced-substituted Ba-ferrite particles are reoxidized, the coercivity is reversible at the first step but irreversible at the second step. During the third step of reduction process above 410 $^{\circ}C$. The magneto plumbite structure was collapsed with formation of $\alpha$-Fe and $BaFeO_{3-x}$ phases and consequently the coercivity distribution is broaden and the coercivity irreversible. The coercivity and saturation magnetization decreases and increases up to 130 emu/g respectively. In this study, it is found that the substituted elements prevent the magneto-plumbite structure from collapse during the reduction process and furthermore migrate from the magnetic sites of $2a+4f_{IV}$, 2b, and 12k to $4f_{VI}$ and 12k'. An increase in the coercivity before the collapse of magneto-plumbite structure is attributed to the migration of cations in hexagonal Ba-ferrite structure.

• Journal of environmental and Sanitary engineering
• /
• v.17 no.1
• /
• pp.63-68
• /
• 2002

Amount of styrene and divinylbenzene(DVB) was adjusted under injection of nitrogen, copolymer having crosslink of 1%, 2% and 5% was synthesized and zinc chloride was added to it. Put into benzene, swell it, add potassium iodide and 1-aza-15-crown-5 of 21.93g in toluene solution and functional resin which can adsorb heavy metal ions by stir reflex at $55^{\circ}C$ for 30 hours was synthesized. The content of divinylbenzene of this resin was increased as crosslink increase, macroporous gets smaller and the content of chlorine was reduced, which affects macrocyclic ligand in the process of substitution and content of nitrogen was also reduced. And the form of functional synthetic resin was distorted by substitution reaction of hydrogen and chlorine atoms.