• Journal of the Korean Electrochemical Society
• /
• v.9 no.2
• /
• pp.89-94
• /
• 2006

Nafion/poly(ether(amino sulfone)) acid-base blend polymer electrolyte membranes were prepared and their proton conductivity and dimethyl ether permeability were investigated. Characteristics of direct dimethyl ether fuel cell (DDMEFC) performance using prepared blend membrane were studied. The increase of amine groups in the base polymer in composite membranes resulted in the decrease in dimethyl ether permeability. The proton conductivity of the blend membranes gradually increased as increasing temperature. The conductivity of Nafion/PEAS-0.6 (85:15) blend membranes was measured to be $1.42\times10^{-2}S/cm\;at\;120^{\circ}C$ which was higher than that of the recast Nafion. The performance of direct dimethyl ether fuel cell (DDMEFC) using the Nafion/PEAS blend membranes was higher than that using $Nafion^(R)115$ membrane. Enhanced performance of direct dimethyl ether fuel cells using Nafion/PEAS blend membrane was explained by reducing dimethyl ether (DME) crossover through the electrolyte membrane and maintenance of the proton conductivity at high temperature.

• Applied Chemistry for Engineering
• /
• v.26 no.3
• /
• pp.372-376
• /
• 2015

6-MQCC (Cr(VI)-6-methylquinoline) complex was synthesized by the reaction of 6-methylquinoline with chromium(VI) trioxide in 6 M HCl. The structure was characterized using IR (Infrared Spectroscopy) and ICP (Inductively Coupled Plasma) analysis. The oxidation of benzyl alcohol using 6-MQCC in various solvents showed that the reactivity increased with the increase of the dielectric constant, in descending order of DMF > acetone > chloroform > cyclohexene. In the presence of DMF solvent with acidic catalyst such as sulfuric acid ($H_2SO_4$), 6-MQCC oxidized benzyl alcohol (H) and its derivatives ($p-OCH_3$, $m-CH_3$, $m-OCH_3$, m-Cl, $m-NO_2$) were effectively oxidized. Electron-donating substituents accelerated the reaction rate, whereas electron acceptor groups retarded the reaction rate. The Hammett reaction constant (${\rho}$) was -0.69 (308 K). The observed experimental data was used to rationalize the fact that the hydride ion transfer occurred at the rate-determining step.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.237-237
• /
• 2012

토파즈는 Al2SiO4 ((F,OH)2) 화학성분을 이루고 있는 광물로써 주로 Fe, Cr, V 등과 같은 불순물을 포함하고 있다. 토파즈는 colorless, blue, pink, yellow 등 다양한 컬러로 산출된다. 결정 내 Si4+ 가 있어야 할 자리에 Al3+ 가 치환되면 Al3+ 를 둘러싸고 있는 4개의 산소 중 하나의 최외각 전자가 전자가를 맞추기 위해 주변에 있던 수소와 결합하여 hole center를 형성한다. 이때 토파즈는 옅은 황색의 컬러를 발색하게 된다. 그 외 청색과 핑크색 등의 컬러는 Al3+ 자리에 치환된 Fe, Cr 등과 같은 불순물에 의해 발색을 일으킨다. 또한 토파즈는 인위적으로 감마선, 전자 빔, 양성자 빔, 중성자 빔을 통해서도 hole center를 형성시켜 컬러를 발색시킬 수 있다고 잘 알려져 있다. 본 연구에서는 총 8개의 무색 토파즈를 이용하여 다양한 조건(energy 및 dose)의 전자 빔 조사를 통해 각 조건 별 컬러변화 및 분광학적 특성변화를 관찰하였다. 모든 시료는 WD-XRF를 통해 정성분석을 하였고, 전자스핀공명(ESR)기기를 통해 전자 빔 조사 전과 후 전자의 스핀 특성 변화를 관찰하였다. 자외선-가시광선 분광분석결과 모든 시료는 전자빔 조사 후 황색과 관련이 있는 450 nm 부근의 파장 영역에서 흡수 peak가 증가하는 것을 확인할 수 있었다. 또한 전자 빔 조사 후 전자스핀공명 분석 결과에서도 Fe3+ 와 관련이 있는 g=3.5~4 영역은 감소하는 반면에 hole center와 관련이 있는 g=2.012 영역이 증가하는 향상을 보였다. 본 연구결과를 통해 우리는 전자 빔 조사 조건에 따라 토파즈의 결정 내부에 미치는 영향 및 컬러 변화와의 상관관계에 대해 확인할 수 있었다.

• Journal of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.378-382
• /
• 1982

Green crystalline salts of substituted pyridinium oxopentachloromolybdates(V) were obtained from concentrated hydrochloric acid solution of molybdenum(V)-thiocyanate extract. $MoOCl_3(X-py)_2$ (X-py were 4-and 3-cyanopyridine, 2-amino-4-picoline and 4-acetylpyridine) were obtained by reflux of the corresponding substituted pyridinium salts of oxopentachloromolybdates(Ⅴ) in absolute ethanol. ($X-pyH_2$)[$MoOCl_5$]$H_2$O containing the $MoO^{3+}$ group are dissolved and hydrolysed in water but $MoOCl_3(X-py)_2$ are insoluble in water, alcohol and acetone. The complexes are paramagnetic compounds.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.871-877
• /
• 1994

Most of the aromatic nitro compounds were reduced to amines in high yield by transfer of hydrogen from 4-vinyl cyclohexene to the substrate via palladium catalyst. The usefulness of the method is not affected by the presence of a variety of other functional groups such as -OH, $-OCH_3$, $-CH_3$, $-CO_2H$, and -Cl, except for halogen which is removed during hydrogenation. The reduction of ortho-substituted nitrobenzene such as o-nitrotoluene, o-nitrophenol, o-nitroanisole was slower than the para isomer. Typically, the nitro compound is refluxed in ethanol with a large exess of 4-vinylcyclohexene in the presence of Pd-C catalyst. Under the above conditions, p-nitrobenzaldehyde, p-nitrobenzyl alcohol, and p-nitrobenzyl acetate were reduced to p-toluidine.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.6039-6046
• /
• 2013

Cr(VI)-heterocyclic complex[Cr(VI)-2-methylpyrazine] was synthesized by the reaction between of heterocyclic compound(2-methylpyrazine) and chromium trioxide, and characterized by IR and ICP analysis. The oxidation of benzyl alcohol using Cr(VI)-2-methylpyrazine in various solvents showed that the reactivity increased with the increase of the dielectric constant(${\varepsilon}$), in the order : cyclohexene${\rho}$) was Cr(VI)-2-methylpyrazine= -0.65(308K). The observed experimental data have been ratiolized. The hydride ion transfer causes the prior formation of a chromate ester in the rate-determining step.

• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.36-40
• /
• 2007

The study on the isomerization reaction of endo-tetrahydrodicyclopentadiene and endo-tetrahydrodi(methylcyclopentadiene) using heteropolyacid catalyst was carried out. Exo compound was prepared from endo compound through isomerization reaction. To improve the problem of aluminum chloride as an isomerization catalyst, application of heteropolyacid was attempted. In use of Keggin type heteropolyacid, catalytic activity was extremely high at cesium substitution instead of 2.5 hydrogen atoms of $H_3PW_{12}O_{40}$. Using the cesium substituted heteropolyacid, isomerization reaction rate was faster than aluminum chloride and the effect of reaction temperature and times on reactivities were compared in isomerization of tetrahydrodicyclopentadiene and tetrahydrodi(methylcyclopentadiene).

• Applied Chemistry for Engineering
• /
• v.23 no.3
• /
• pp.284-288
• /
• 2012

This work deals with the chemical characterization of glycine aqueous solution in $CO_2$ absorption. Three alkali elements were impregnated into the glycine in order to facilitate the formation of amino functionalities. The analysis by IR revealed the transformation of ammonium ions to the amino group. In addition, the NMR analysis showed that the substitution of metal cations to the chemical shift of hydrogen and carbon atoms in glycine; in order of lithium glycinate, sodium glycinate and potassium glycinate depending on the electro negativity. Meanwhile, the $CO_2$ absorption at room temperature was the highest in primary amine solution, but at the increasing temperature sodium glycinate could capture more $CO_2$ than that of the pure amine solution.

• Journal of the Korean Chemical Society
• /
• v.39 no.9
• /
• pp.692-697
• /
• 1995

The chemical compositions and possible structure for the complex of B15C5 with Nd(Ⅲ) have been determined by NMR spectrophotometry in acetone-d6. On the stepwise additions of Nd(Ⅲ) to B15C5 solution of constant concentration, all the resonances shifted to downfield and the mole ratio of B15C5 to Nd(Ⅲ) was found to be 1 : 1. From the line broadening of proton peaks of NMR spectra, it was found that oxygen atoms in B15C5 interact with Nd(Ⅲ) ion. And in IR spectra of Nd(Ⅲ)-B15C5 complex, the band of asymmetric C-C-O stretching vibration shifted to a lower frequency region upon complexation. We have proposed the possible structure of the Nd(Ⅲ)-B15C5 coordinated with the five ether oxygen atoms and with the three bidentate nitrato groups.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5990-5996
• /
• 2011

6-Methylquinolinium dichromate[$(C_{10}H_9NH)_2Cr_2O_7$] was synthesized by the reaction of 6-methylquinoline with chromium trioxide in $H_2O$, and characterized by IR, ICP. The oxidation of benzyl alcohol using 6-methylquinolinium dichromate in various solvents showed that the reactivity increased with the increase of the dielectric constant(${\varepsilon}$), in the order: cyclohexene < chloroform < acetone < N,N- dimethylformamide. In the presence of hydrochloric acid($H_2SO_4$ solution), 6-methylquinolinium dichromate oxidized benzyl alcohol and its derivatives(p-$OCH_3$, m-$CH_3$, H, m-$OCH_3$, m-Cl, m-$NO_2$) smoothly in DMF. Electron-donating substituents accelerated the reaction, whereas electron acceptor groups retarded the reaction. The Hammett reaction constant(${\rho}$) was -0.67(303K). The observed experimental data was used to rationalize the hydride ion transfer in the rate-determining step.