• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2006.05a
• /
• pp.232-237
• /
• 2006

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3191-3196
• /
• 2007

The present study addresses a method to operate a fuel-cell system effectively using a recirculation ejector which recycles wasted hydrogen gas. Configuration of a recirculation ejector is changed to investigate the flow behavior through it under varying operating conditions, and how such conditions affect the fuel-cell hydrogen cycle. The numerical simulations are based on a fully implicit finite volume scheme of the axisymmetric, compressible, Reynolds-Averaged, Navier-Stokes equations for hydrogen gas, and are compared with available experimental data for validation. The results show that a hydrogen recirculation ratio is effectively controlled by a configurational alteration within the operational region in which the recirculation passage doesn't plugged by a sonic line.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.156-160
• /
• 2007

Ejector system is a device to transport a low-pressure secondary flow by using a high-pressure primary flow. Ejector system is, in general, composed of a primary nozzle, a mixing section, a casing part for suction of secondary flow and a diffuser. It can induce the secondary flow or affect the secondary chamber pressure by both shear stress and pressure drop which are generated in the primary jet boundary. Ejector system is simple in construction and has no moving parts, so it can not only compress and transport a massive capacity of fluid without trouble, but also has little need for maintenance. Ejectors are widely used in a range of applications such as a turbine-based combined-cycle propulsion system and a high altitude test facility for rocket engine, pressure recovery system, desalination plant and ejector ramjet etc. The primary interest of this study is to set up an applicable model and operating conditions for an ejector in the condition of sonic and subsonic, which can be extended to the hydrogen fuel cell vehicle. Experimental and theoretical investigation on the sonic and subsonic ejectors with a converging-diverging diffuser was carried out. Optimization technique and numerical simulation was adopted for an optimal geometry design and satisfying the required performance at design point of ejector for hydrogen recirculation. Also, some sonic and subsonic ejectors with the function of changing nozzle position were manufactured precisely and tested for the comparison with the calculation results.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.832-835
• /
• 2009

폐기물의 감량화 및 자원화 기술 중 가장 대표적인 기술로 폐기물의 가스화 용융 기술을 들 수 있다. 폐기물 가스화 용융 기술은 폐기물 내의 탄소 및 수소 성분은 가스화 하여 CO, $H_2$가 주성분인 합성가스(synthesis gas, syngas)로 전환하고, 불연물은 용융하여 환경적으로 무해한 슬래그 또는 금속으로 회수하는 기술이다. 본 연구에서는 고발열량폐기물과 탈수슬러지 혼합가스화를 통하여 생산된 합성가스를 합성가스 압축기를 통하여 유용한 원료물질을 제조하는 공정인 수성가스 전환 반응(water gas shift reaction)과 가스화 반응기의 보조연료로 투입하기 위한 합성가스 압축, 이송 시스템의 운전 특성을 고찰하였다. 그 결과 고발열량폐기물과 탈수슬러지 혼합가스화에서 합성가스는 안정적으로 발생하였으며, 합성가스 압축, 이송시스템을 위한 정제설비에서의 분진제거는 99.07 %의 효율을 얻었고, 또한 합성가스 재순환 장치의 성능시험을 통하여 대기 중의 산소가 유입이 안 되는 기밀성을 확인하였다. 합성가스 압축, 이송 공급 유량 제어 실험 결과로는 합성가스 압축기 기동 시 합성가스 압축압력과 공급유량은 비례적으로 증감하는 것을 알 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.118-121
• /
• 2007

수소 스테이션의 수소분리정제를 위한 Compact 형 PSA를 연구하였다. 수소 스테이션의 공정과정 중에서 수소 분리를 위한 PSA 장치는 에너지효율면에서 장점을 가지고 있지만 부피가 커서 많은 부지를 차지하는 단점이 있다. 수소 PSA의 이러한 단점을 줄이기 위하여 하나의 흡착탑 안에 다른 흡착탑을 넣는 Dual bed 형태의 Compact형 수소 PSA공정을 연구하였다. Compact형 수소 PSA는 하나의 bed안에 다른 하나의 bed를 넣음으로써 시스템이 차지하는 부피를 줄이는 한편, inner bed와 outer bed사이의 열교환 효과가 나타나기 때문에 그 효율을 높일 수가 있다. Compact형 Dual bed는 활성탄으로 충진하였고 공급 기체로는 4성분 수소 혼합물 ($H_2/CO/CH_4/CO_2$, 69:2:3:26 vol.%)를 사용하였다. 흡착탑의 동특성을 알아보기 위하여 공급유량 7LPM, 흡착압력 9atm의 조건으로 파괴 실험을 수행하였다. 또한, Compact형 흡착탑의 열교환 효과가 PSA공정에 미치는 영향을 보고자 한 쪽 탑에서 흡착을 할 때, 다른 탑에서 탈착이 일어나는 실험을 하였다. 그리고 P/F ratio에 따라 Compact형 PSA 공정 실험을 하고 Compact형 흡착탑과 같은 부피의 일반 두 탑 PSA 공정을 시뮬레이션 값과 비교함으로써 Compact형 PSA의 성능을 알아 보았다. 그 결과 Dual bed PSA는 작은 부피를 차지하는 장점뿐만 아니라 열적 효과로 인하여 기존의 단일 흡착탑 PSA에 비하여 보다 높은 효율을 나타내면서 우수한 수소 분리 성능을 보여주었다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.5
• /
• pp.678-685
• /
• 2011

An Ejector enhances system efficiency, are easily operated, have a mechanically simple structure, and do not require a power supply. Because of these advantages, the ejector has been applied to a variety of industrial fields such as refrigerators, power plants and oil plants. In this work, an ejector was used to safely recycle anode tail gas in a 75-kW Molten Carbonate Fuel Cell (MCFC) system at KEPCO Research Institute. In this system, the ejector is placed at mixing point between the anode tail gas and the cathode tail gas or the fresh air. Commercial ejectors are not designed for the actual operating conditions for our fuel cell system. A new ejector was therefore designed for use beyond conventional operating limits. In the first place, a few sample ejectors were manufacured and the entrainment ratio was measured at a dummy stack. Through this experiment, the optimum ejector was chosen. The 75-kW MCFC system equipped with this optimum ejector was operated successfully.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.6
• /
• pp.446-454
• /
• 2008

The purpose of this paper is to analyze two-phase flows of the hydrogen recirculation system. Two-phase flow modeling is one of the great challenges in the classical sciences. As with most problems in engineering, the interest in two-phase flow is due to its extreme importance in various industrial applications. In hydrogen recirculation systems of fuel cell, the changes in pressure and temperature affect the phase change of mixture. Therefore, two-phase flow analysis of the hydrogen recirculation system is very important. Two-phase computation fluid dynamics (CFD) calculations, using a commercial CFD package FLUENT 6.2, were employed to calculate the gas-liquid flow. A two-phase flow calculation was conducted to solve continuity, momentum, energy equation for each phase. Then, the mass transfer between water vapor and liquid water was calculated. Through an experiment to measure production of liquid water with change of pressure, the analysis model was verified. The predictions of rate of condensed liquid water with change of pressure were within an average error of about 5%. A comparison of experimental and computed data was found to be in good agreement. The variations of performance, properties, mass fraction and two-phase flow characteristic of mixture with resepct to the fuel cell power were investigated.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2010.04a
• /
• pp.188-188
• /
• 2010

수소 에너지는 화석연료의 한정된 매장량과 연소시 발생되는 환경문제를 해결하기 위해 가장 이상적인 대체에너지로서 주목을 받고 있다. 그러나 현재까지의 기술로는 경제성 있는 수소 제조가 쉽지 않다. 그 방법 중 바이오매스 및 유기성폐기물의 가스화를 통한 수소제조분야는 자원의 재순환, 페기물 처리, 열원의 이용, 직접적인 $CO_2$ 삭감 등의 부수적인 효과가 높아 경제성 있는 수소제조법으로 평가되고 있다. 이에 본 연구에서는 수소 생산을 목적으로 하는 가스화기와 초고온개질기로 구성된 Twin-Bed 가스화 시스템을 개발하고, 이를 이용한 Wood pellet(미송)의 가스화 특성 및 생성 가스의 초고온개질 특성을 고찰하는 것을 목적으로 한다. 가스화기의 시간변화에 따른 생성 가스 수율에 대한 결과, 생성 가스 수율은 약 20분경과 후 안정화되었으며, 실험 2시간 동안의 $H_2,\;CH_4,\;CO,\;CO_2$의 평균 수율은 각각 17.77, 11.94, 42.13, 28.16 Vol.%의 결과를 보였다. 가스화기로부터 생성된 가스는 down-draft 형태의 고온개질기로 도입시켜, $1100^{\circ}C$의 초고온에서 개질반응을 수행하였다. $CH_4$의 경우 11.95 Vol.%에서 0 Vol.%로 거의 대부분 분해되었으며, $H_2$는 17.77 Vol.%에서 25.46 Vol.%로 약 65.8% 증가하는 결과를 나타냈다. 또한 수소 생성량은 평균 5 L/min kg-Biomass이었다. 냉가스 효율은 72.1%로서 나타나, 일반적으로 폐기물의 냉가스 효율인 약 50% 전후의 결과에 비하여 높은 효율을 보였다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.5
• /
• pp.503-512
• /
• 2012

There is a new power generation system such as direct coal fuel cell (DCFC) with a solid oxide electrolyte operated at relatively high temperature. In the system, it is of great importance to feed coal continuously into anodic electrode surface for its better contact, otherwise it would reduce electrochemical conversion of coal. For that purpose, it is required to improve the electrochemical conversion efficiency by using either rigorous mixing condition such as fluidized bed condition or just by recirculating coal particle itself successively into the reaction zone of the system. In this preliminary study, we followed the second approach to investigate how significantly particle recycle would affect the coal conversion efficiency. As a first phase, coal conversion was analyzed and evaluated from the thermochemical reaction of carbon with air under particle recirculating condition. The coal conversion efficiency was obtained from raw data measured by two different techniques. Effects of temperature and fuel properties on the coal conversion are specifically examined from the thermochemical reaction.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.915-921
• /
• 2008

In most PEM fuel cell research, effects of cell geometry, physical properties of component such as membrane, carbon cloth, catalyst, etc. and water transport phenomena are key issues. The scope of these research was limited to single cell and stack except BOP(Balance of plant) of fuel cell. The research fouced on the fuel cell system usually neglect to consider detailed transport phenomena in the cell. The research of the fuel cell system was interested in a system performance and system dynamics. In this paper, the effect of the anode recirculation is calculated using the 2D steady-state model. For this work, 2D steady-state modeling and experiments are performed. For convenience of modifying of model equation, not commercial pakage but the in-house algorithm was used in simulation. For an vehicle industry, the analysis of the anode recirculation system helps the optimization of operating condition of the fuel cell.