• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.201-201
• /
• 1999

소수성의 특성을 가지는^g , pp (polypropylene)의 표면을 이온 보조 반응법(IAR)으로 처리하여 친수성으로 개질하였다. 이온빔 보조 반응법은 고에너지 이온빔을 이용한 기존의 표면처리 방식과는 달리 1keV 영역의 에너지를 가진 이온빔을 조사하면서 시료 주위에 반응성 가스를 불어넣어 줌으로써 표면의 성질을 변화시키는 방법이다. 여기서 조사된 수소이온의 에너지는 0.6에서 1.0keV까지 변화시키고 시료의 주변에 불어주는 산소의 양은 0에서 8ml/min으로 변화시켰으며 이온 조사량은 5x1014에서 1x1017ions/$\textrm{cm}^2$까지 변화시켰다. 그 결과 처리하지 않은 시료의 접촉각은 93$^{\circ}$이었으며 이온조사량이 1x1017ions/$\textrm{cm}^2$이고 가속에너지가 1.0keV인 조건에서 수소 이온빔만으로 처리한 시편의 경우 접촉각은 60$^{\circ}$정도 였으나 수소이온보조 반응법으로 처리한 시편의 경우는 $10^{\circ}$이하까지 접촉각이 감소하였음을 알 수 있었다. 이는 표면처리에 따른 표면의 친수성 작용기의 형성을 예상할 수 있으며 그 존잴르 확인하기 위하여 대기중과 물속에서 각각 보관한 시료의 접촉각과 표면에너지를 계산하여보았다. 그 결과 대기중에서 방치한 시편의 경우40$^{\circ}$ 정도로 감소하였으나 증류수에 보관한 시료의 경우는 15$^{\circ}$정도의 변화를 보였다. 물과 Formamide의 접촉각의 측정으로 표면에너지를 계산한 결과 산소분위기에서 수소이온빔으로 처리된 시료는 23dyne/cm에서 64dyne/cm이상까지 변화함을 관찰하였다. 위의 결과들이 표면거칠기에 미치는 영향을 고찰하기 위해 처리되지 않은^g , pp 의 근(root mean square)값은 8.30nm이었고 1kevdpsj지에서 불어준 산소4ml/min이고 이온 조사량이 1x1017ions/$\textrm{cm}^2$인 경우 접촉각은 $10^{\circ}$를 나타냈으며 rms값은 20.8nm를 나타내었다. XPS (X-ray photoelectron spectroscopy) 분석을 통하여 1x1017ions/$\textrm{cm}^2$에서 산소기체를 4ml/min 불어넣어준 후 C-O, C=O, (C=O)-O등의 친수성 작용기가 형성되었음을 확인하였다.^g , pp 의 접착력을 알아보기 위해 유성 페인트를 전도성 고분자위에 후막 처리하였다. 스카치 테이프를 테스트를 통하여 이온 보조 반응법으로 처리된^g , pp 표면이 처리하지 않은 시편에 비하여 접착력 향상되었음을 확인하였다.

• Membrane Journal
• /
• v.20 no.1
• /
• pp.40-46
• /
• 2010

In this study, we manufactured the membrane using the polyethersulfone (PES) of fiber by using the electrospinning method. The polymer electrolyte membrane for fuel cells was manufactured by impregnating Nafion solution to the porous PES membrane. We confirmed that electrospun PES membrane has higher thermal stability than Nafion 212 membrane by thermogravimetric analysis. Impregnated Nafion in the pores of the electrospun PES membrane was characterized by scanning electron microscopy. The AC impedance data shows the hydrogen ionic conductivity of $10^{-2}$ S/cm below $100^{\circ}C$. Nafion impregnated PES membrane shows the maximum performance at $90^{\circ}C$ showing current density of 389 mA/$cm^2$ at 0.6 V, while Nafion 212 membrane shows maximum at $75^{\circ}C$.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.416-426
• /
• 2023

In this study, hindered amine-grafted graphene oxide (HA-GO) with antioxidant properties was prepared and incorporated into Nafion-based composite membranes as an effective filler material for polymer electrolyte membrane fuel cell applications. HA-GO was synthesized via a ring-opening reaction between amine groups in 4-amino-2, 2, 6, 6-tetramethyl piperidine and epoxy groups on the surface of GO. Nafion-based composite membranes containing different weight contents of HA-GO were fabricated to compare the polymer electrolyte membrane properties with those of the pure Nafion membrane. The composite membranes with HA-GO were found to have better mechanical properties, chemical stability, and proton conductivity than the pure Nafion membrane. In particular, the conductivity retention behavior confirmed by the decrease in proton conductivity after Fenton's test of the composite membranes was better than that of the pure Nafion membrane due to the incorporation of HA-GO with effective antioxidant properties.

• Journal of the Korean Electrochemical Society
• /
• v.19 no.2
• /
• pp.45-49
• /
• 2016

In order to mitigate oxidative degradation of polymer membrane during fuel cell operation, an organic radical quencher was introduced. Rutin was selected as a radical quencher and mixed with sulfonated poly(arylene ether sulfone) to prepare composite membrane. Physicochemical properties of the composite membranes such as water uptake and proton conductivity were characterized. Hydrogen peroxide exposure experiment, which can mimic accelerated oxidative stability test during fuel cell operation, was adopted to evaluate the oxidative stability of the membranes. The composite membranes containing Rutin showed similar proton conductivity and enhanced oxidative stability compared to pristine ones.

• The Journal of Korean Medicine
• /
• v.23 no.1
• /
• pp.61-66
• /
• 2002

목적： 본 연구는 감미의 작용에 관한 "감보" 등의 이론적 바탕과 약물의 이화학적인 특성을 통해 약효를 어느 정도 예측하고자 하였다. 방법： 한약재의 오미별 이화학적 특성을 구명하기 위하여 수소이온농도(pH), $200^{\circ}C$와 $550^{\circ}C$에서의 질량감소량, 전기전도도, 가시부 및 자외부 흡수 spectrum의 전자전이에 따른 비율, TLC에 의한 주요 성분의 이동율($R_{f}{\;}value$)과 낮은 성분의 이동율($R_{f}{\;}value$)을 측정하였다. 결과： 전탕에 따른 수소이온농도(pH)의 평균은 $5.24{\pm}0.56$이었으며. 약재의 휘발 성분 및 수분 함유량은 $288{\pm}125mg$이었고, 유기물함량의 평균은 $867{\pm}116g$이었으며, 전기전도도의 평균은 $5.46{\pm}0.93S/cm$이었으며, 가시부 및 자외부 흡수 spectrum의 전자전이에 따른 흡광도 비율($\pi{\\rightarrow}\pi^{*}/n{\rightarrow}\pi^{*}$)의 평균은 $3.043{\pm}0.679$이었으며, TLC에 의한 주요 성분의 이동율($R_{f}{\;}value$)의 평균은 $0.553{\pm}0.317$이었고, TLC에 의한 낮은 성분의 이동율($R_{f}{\;}value$)의 평균은 $0.136{\pm}0.122$ 이었다. 결론：약재의 pH는 모두 7보다 낮은 약산성 이었으며, 약재의 휘발 성분 및 수분 함유량은 대략 10~50%정도를 나타내었다. 유기물함량은 대략 80~95%정도를 나타내었다. 전기전도도를 통하여 산약이나 감초는 이온성 물질을 많이 포함하고 있으리라 추정된다.

• Membrane Journal
• /
• v.27 no.2
• /
• pp.182-188
• /
• 2017

Sulfonated poly(arylene ether sulfone) (SPAES)-3-mercaptopropyl silica gel (3MPTSG) composite membranes with improved oxidative stability were prepared for polymer electrolyte fuel cell application. It has been reported that ether part of main chain of aromatic hydrocarbon based membranes were weak to radical attack to decrease membrane durability. In this study, the hydrophilic inorganic particles were introduced by minimizing a decrease in ion conductivity and increasing an oxidative stability. The composite membranes were investigated in terms of ionic conductivity, ion exchange capacity (IEC), FT-IR, TGA and contact angle, etc. As a result, increasing amount of the 3MPTSG resulted in decrease in proton conductivities and water uptakes at 100% R.H. but enhanced thermal and oxidative stabilities.

• Membrane Journal
• /
• v.18 no.2
• /
• pp.116-123
• /
• 2008

Proton conductive hybrid nanocomposite polymer electrolyte membranes comprising polystyrene-5-poly (hydroxyethyl methacrylate) (PS-b-PHEMA), sulfosuccinic acid (SA) and phosphotungstic acid (PWA) were prepared by varying PWA concentrations. The PHEMA block was thermally crosslinked by SA via the esterification reaction between -OH of PHEMA and -COOH of SA. Upon the incorporation of PWA into the diblock copolymer, the symmetric stretching bands of the $SO_3^-$ group at $1187cm^{-1}$ shifted to a lower wavenumber at $1158cm^{-1}$, demonstrating that the PWA particles strongly interact with the sulfonic acid groups of SA. When the concentration of PWA was increased to 30wt%, the proton conductivity of the composite membrane at room temperature increased from 0.045 to 0.062 S/cm, presumably due to the intrinsic conductivity of the PWA particles and the enhanced acidity of the sulfonic acid in the membranes. The membrane containing 30wt% of PWA exhibited a proton conductivity of 0.126 S/cm at $100^{\circ}C$. Thermal stability of the composite membranes was also enhanced by introducing PWA nanoparticles.

• Membrane Journal
• /
• v.18 no.4
• /
• pp.261-267
• /
• 2008

A graft copolymer consisting of poly(vinyl chloride) (PVC) backbone and poly(hydroxyethyl acrylate) (PHEA) side chains was synthesized via atom transfer radical polymerization (ATRP). Direct initiation of the secondary chlorines of PVC facilitates grafting of hydrophilic PHEA monomer. This graft copolymer, i.e. PVC-g-PHEA was cross-linked with sulfosuccinic acid (SA) via the esterification reaction between -OH of the graft copolymer and -COOH of SA, as confirmed by FT-IR spectroscopy. Ion exchange capacity (IEC) continuously increased to 0.87meq/g with increasing concentrations of SA, due to the increasing portion of charged groups in the membrane. However, the water uptake increased up to 20.0wt% of SA concentration above which it decreased monotonically. The membrane also exhibited a maximum proton conductivity of 0.025 S/cm at 20.0 wt% of SA concentration, which is presumably due to competitive effect between the increase of ionic sites and the crosslinking reaction.

• Analytical Science and Technology
• /
• v.5 no.1
• /
• pp.33-39
• /
• 1992

THF-based crown-4 of 16-membered rings having tetrahydrofuran unit was synthesized by an acid-catalyzed condensation of furan and acetone followed by hydrogenation in an effort to obtain highly elective ionophores for lithium ions. The new ionophore was compared with previously reported ionophores under similar measurement conditions with the same plasticizer, tris(2-ethylhexyl) phosphate in poly(vinyl chloride)(PVC) membrane electrodes. Separate solution method was used to determine relative selectivity coefficients for the electrode. The selectivity coefficients($K_{LiM}^{POT}$) of lithium over ammonium, alkali and alkaline earth metal ions go from about $2.4{\times}10^{-1}$ to $2.3{\times}10^{-4}$ to working range and pH dependence have also been studied.

• Journal of the Korean Electrochemical Society
• /
• v.19 no.1
• /
• pp.14-20
• /
• 2016

Vanadium redox flow battery (VRFB) is an energy conversion device in which charging and discharging are alternatively carried out by oxidation and reduction reactions of vanadium ions with different oxidation states. VRFB consists of electrolyte, electrode, ion-exchange membrane, etc. The role of ion-exchange membranes in VRFB separates anolyte and catholyte and provides a high conductivity to hydrogen ions. Recently much attention has been devoted to develop ideal ion-exchange membranes for VRFB. A number of developed ion-exchange membranes should be evaluated to find out ideal ion-exchange membranes for VRFB. Long-term durability test is a crucial characterization of ion-exchange membranes for commercialization, but is very time-consuming. In this study, the life time prediction protocol of ion-exchange membranes in VRFB cell tests was developed through short-term single cell performance evaluation (real total operation time, 87.5 hrs) at three different current densities. We confirmed a decrease in test time up to 96.2% of real durability tests (expected total operation time, 2,296 hrs) and 5~6% of relative error discrepancy between the predicted and the real life time in a unit cell.