• Korean Journal of Soil Science and Fertilizer
• /
• v.14 no.3
• /
• pp.163-168
• /
• 1981

The studies were carried out to examine the effect of soil improvement agents, such as lime, wollastonite and phosphate, in reducing the damage caused by hydrogen fluoride gas to the vegetative growth of rice. The yield loss, damage rate of the plant leaves, the fluoride and silicate concentrations of the plants were measured. The results obtained are summarized as follows : 1. Of various levels of added lime and wollastonite, the best were found to be neutralized lime plus lime 150kg/10a, and wollastonite 150kg/10a. 2. Added fluoride increased the fluoride content of the plant and the damage rate of the plant leaves, and the yield was greatly decreased. 3. The silicate concentration at harvesting period was also increased by high amounts of fluoride in the plant during vegetative growth. 4. Increasing the amount of added lime increased the watersoluble silicate concentration in the soil. The silicate content of the plant showed the same tendency.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.237-242
• /
• 1998

Zr합금의 수소화 반응속도에 미치는 합금원소의 영향을 평가하기 위하여 Zr과 Zr-0.8Sn-XNb계열(X=0.2, 0.4, 0.8, 1.0) 및 Zr-0.4Nb-YSn계열(Y=0.5, 0.8, 1.5, 2.0)의 3원계 합금으로 electro-microbalance가 장착된 TGA (thermo-gravimetric apparatus)장치를 이용하여 40$0^{\circ}C$에서 1기압 수소와의 반응에 따른 무게증가를 in-situ로 측정하였다 Sn 첨가량이 증가함에 따라 1.5% 까지는 수소반응에 따른 무게증가율이 낮게 나타났으나 Sn을 2.0% 함유한 Zr-0.4Nb-2.0Sn합금의 경우 가장 높게 나타났다. 이는 Sn의 함량이 증가할수록 수소침투에 대한 저항성이 증가함을 의미하지만 Sn이 고용도 이상 함유되면 Sn을 함유한 다량의 석출물이 대량수소침투의 site로 작용하여 수소침투가 가속화된 것으로 평가된다. Nb의 경우 첨가량을 증가시킬수록 무게증가는 크게 나타났는데 이는 Nb이 수소흡수성이 크기 때문이며 Zr-0.8Sn-0.2Nb 및 Zr-0.8Sn-0.4Nb 합금보다 Zr-0.8Sn-0.8Nb 및 Zr-0.8Sn-1.0Nb 합금의 경우 TEM을 이용한 금속간 석출물(intermetallic precipitates) 분석에서 이러한 석출물들의 평균크기 및 개수가 크게 평가되었고, 또한 Zr-0.8Sn-0.2Nb, Zr-0.8Sn-0.4Nb 합금에서는 관찰이 되지 않는 $\beta$-Zr 석출물이 관찰되었다 이러한 사실로부터 Nb의 큰 수소흡수성에 부가적으로 이러한 석출물들이 수소침투를 가속화 하는 데에 기여하는 것으로 여겨진다.

• Korean journal of applied entomology
• /
• v.50 no.3
• /
• pp.185-194
• /
• 2011

Aliphatic cuticular hydrocarbons (CHCs) of different developmental stages of the spot clothing wax cicada, Lycorma delicatula (Hemiptera: Fulgoridae) were analyzed using GC and GC-MS. The numbers of carbons in the major CHCs of each developmental stage 32, 33, 28, 38, 37 in the egg, 1st, 2nd, 3rd, and 4th instar nymphal stages, and adults, respectively. The cuticle of Lycorma delicatula contains mainly methyl-branched 9-methylheptacosane (15.11%) in the egg stage, and a high proportion of n-heptacosane in nymphal stages (15.75, 22.42, 25.04, and 23.11 % in the 1st, 2nd, 3rd and 4th instars, respectively). In contrast, male and female adults had high proportions of n-nonacosane (13.42 and 16.55%). The chemical constituents of CHCs were classified into five groups (n-alkanes, monomethylalkanes, dimethylalkanes, trimethylalkanes, olefins) and group profiles of each developmental stage were compared. Egg surface was composed mainly monomethylalkanes (45.39%), a saturated hydrocarbon. Nymph CHCs consisted primarily of n-alkanes (37.63 to 46.12%). There was a difference between adult male and female CHCs. However, both contained n-alkanes and monomethylalkanes. CHCs with trimethyl or double bonded structure were rare in all stages.

• Journal of Wetlands Research
• /
• v.10 no.3
• /
• pp.9-26
• /
• 2008

To clarify the reed (Phragmites australis) stand's effects on the sediment properties and its increasing pattern, breaths of reed stands in 1999 and 2000, and sediment properties - water, salt, organic matter, sulphur, nitrogen, carbon and hydrogen contents - along th depth at the three stands in 2007 were surveyed at Suncheon Bay. Regardless of reed stand, the more distance from the land was long, the more water and salt contents of sediment were high. Organic matter content of sediment was high and increased with the reed biomass at the upper layer but low regardless of biomass at the lower layer. Sulphur content of sediment was higher at old reed stand (0.33%) than at new stand (0.21%) or non-vegetated stand (0.23%). Carbon, nitrogen and hydrogen contents of sediment were similar at three stands in mean values. However, their contents were high at upper layer and low at lower layer in a stand. Therefore, the changing pattern of organic matter content with the depth was similar to but not coincided to the inorganic nutrients' ones. The mean breadth of reed stands increased $2.33{\pm}0.73m$ in 1999 and $3.65{\pm}1.64m$ in 2000. However, the increase of reed stands' breadth a year varied along the direction, year or stands, so that there was not a trend in increasing pattern. It was thought that this increasing pattern made the reed's patch round. The height and density of reed shoot in newly formed stand decreased with the distance from the center of stand. In the newly formed peripheral area of a reed stand, the shoot density was not related with the land (north) or sea (south) direction, however, the shoot height was higher in the sea (south) than in the land (north) direction.

• Journal of Energy Engineering
• /
• v.4 no.1
• /
• pp.153-161
• /
• 1995

건식 제련법에 의한 자용제련 공정에 대하여 공정비용을 최소화시키고 최적 조업조건을 제시할 수 있는 최적화 모델을 개발하였다. 본 모델은 Outokumpu 공정을 기본으로 하여 물질 및 에너지 수지식과 비용 방정식을 포함하였으며 주어진 공정조건에서 공업용 산소량, 탄화수소 연료량, 원료 정광의 구리함량, matte의 구리함량 및 전기료 등이 공정비용에 미치는 영향을 계산할 수 있었다. 모델에 의한 계산결과 25% 구리정광을 원료로 하여 자용제련을 할 경우 matte의 최적 구리함량은 65%, 산화용 가스의 최적 산소함량은 53.4%, 최소 공정비용은 $9.22/ton정광이었다.

• Applied Chemistry for Engineering
• /
• v.10 no.5
• /
• pp.743-747
• /
• 1999

The component polymer was modified to enable the formation of intermolecular hydrogen bonding in the immiscibile polystyrene(PS)/polymethacrylate(PMA) blends. The mole percentages of hydroxystyrene of the poly(styrene-co-4-hydroxystyrene) copolymer(modified polystyrene, MPS) were controlled to 7%, 10% and 18%, respectively. MPS was used with PMA to study the variation of the miscibility in blends. PMA which had such different length of side chain as methyl, butyl, hexyl and ethylhexyl, respectively, was selected to study the effect of side chain length on the formation of intermolecular hydrogen bonding. As the hydroxyl content of MPS increased, the formation of intermolecular hydrogen bonding increased. The length of side chain of PMA had enormous effect on the miscibility of blend as confirmed from the result of cloud point measurement. As the length of side chain increased, the formation and the strength of intermolecular hydrogen bonding decreased severely due to the steric effect and the increased chain mobility.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.407-413
• /
• 2006

Artificial aggregates made by coal fly ash that is classified as an industrial by-product was tested to oxidize hydrogen sulfide under various testing conditions. For the determination of optimum condition for converting coal fly ash to aggregates, specimens were prepared by varying ratio of fly ash, cement, water content, and foaming agent. These specimens were tested to determine specific gravity, water absorption, and compressive strength. Specimens, which were used for the removal of hydrogen sulfide, were selected based on the measured specific gravity, water absorption, and compressive strength. Tests for hydrogen sulfide removal were performed via batch and column tests. Under the testing conditions used in this study, removal rates of hydrogen sulfide were linearly proportional to amounts of coal fly ash, and further increased when water was added.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.171-171
• /
• 2011

헬륨냉동계통은 연구용 원자로인 하나로에서 냉중성자를 생산할 수 있도록 설치된 수조내기기 내의 감속재인 수소가 정상적으로 열 사이펀을 유지하기 위한 주요 계통이다. 헬륨냉동계통은 헬륨가스를 압축하는 헬륨 압축부분과 헬륨가스를 팽창시켜 저온을 생성시키는 헬륨 팽창부분으로 나누어진다. 헬륨 압축부분은 두 개의 스크류가 맞물려 회전하면서 약 1.05 bar(a)의 헬륨가스를 최대 13 bar(a)까지 압축시키는 압축기가 있으며, 헬륨 팽창부분인 냉동박스의 팽창 터빈은 self-acting gas bearing에 의해 구동되며, 저온모드 운전 시작시 헬륨 압축부분에서 일부의 가스는 팽창 터빈 축(shaft)으로 유입되어 회전속도가 서서히 증가하면서 고속으로 회전하여 극저온의 헬륨가스(14~18 K)를 생성하는 주요 기기이다. 헬륨을 팽창하는 부분인 냉동박스 내로 헬륨 압축가스를 유입하기 전에 압축된 헬륨가스 내 불순물의 순도를 분석하여 냉동박스의 주요 부품인 팽창터빈의 운전에 영향을 미치지 않는 것이 가장 중요하다. 따라서 헬륨 저압측에 헬륨가스 내 불순물 즉, 수소($H_2$), 수분($H_2O$), 질소($N_2$), 탄화수소류(CxHy) 및 오일(Oilaerosol) 등의 함량을 분석하기위해 가스 분석기가 설치되어 있으며, 냉동박스 내로 유입되기 전에 헬륨압축에서 순환되는 가스 내 불순물인 수분, 질소, 탄화수소류 및 오일은 10 vpm 이하이어야 하며, 수소 함량은 0.1 % 이내이어야 한다. 헬륨 압축부분에서 순환되는 가스의 불순물이 요구 조건에 만족하도록 헬륨 고압측과 헬륨 저압측에 cryogenic adsorber를 설치하여 가스 내 불순물을 제거하는 가스순도제어 작업을 수행해야 한다. cryogenic adsorber를 사용하기 위해서는 장치 내의 불순 가스를 공정진공도(1.33 X $10^{-3}$ mbar) 이하로 진공배기하는 작업이 매우 중요하다. 이는 계통의 헬륨가스가 오염되지 않도록 하는 것으로 cryogenic adsorber 내에는 액체질소를 충전하여 액체질소 온도에 노출된 활성탄층을 헬륨가스가 흐르면서 수분, 질소, 탄화수소류 및 오일 등이 제거된다. 이 논문에서는 헬륨냉동계통의 가스 순도 제어 작업을 통해 헬륨가스의 순도가 요구조건 이하로 만족하며, 팽창 터빈의 운전에 영향을 미치지 않음을 기술하고자 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.7
• /
• pp.627-633
• /
• 2011

Performance of a hydrogen generator for a fuel cell unmanned aircraft was evaluated as the change of temperature environment. Sodium borohydride ($NaBH_4$) was used as a hydrogen source due to its high hydrogen content and good storability. The hydrogen gas was generated by the hydrolysis reaction using a catalytic reactor. Reaction chambers were set up with the range of temperatures from -20 to $60^{\circ}C$. The hydrogen generation rate and temperatures changes of reactor and separator were measured at the $NaBH_4$ concentrations of 20 and 25wt.%. As a result, the hydrogen generation rate was decreased as the repeated reaction cycles. It showed that the hydrogen generation rate was stable at low temperature, while at high temperature the hydrogen generation rate was rapidly decreased. The performance degradation was mainly caused by the catalyst loss and $NaBO_2$ deposition on the catalyst surface.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1994.04a
• /
• pp.10-15
• /
• 1994

전기도금 공정에서 발생하는 수소취성은 다량의 수소이온이 강제품에 흡수되어 취화되는 현상을 나타내는 것으로 인장강도 200KSI 이상이 요구되는 항공기용 또는 로켓트 추진기관용 초고강도강에서 크게 문제가 되고 있다. 본 내용은 전기 카드뮴도금 작업시에 발생되는 수소취성에 대하여 간략하게 기술하고. 이 수소취성을 제거하는 방법 및 수소취성을 저게 생성시키는 저취성도금인 Cd-Ti 합금도금의 공정개발 결과를 보고한다. 실험결과에 의하면 도금층의 Ti함량은 0.1-0.7%이며 Ti의 공석에 의하여 Cd 도금에 비하여 저취성을 나타냈으며, Cd-Ti합도금의 내식성은 상대평가인 염수분무시험 결과 Cd도금과 비교하여 소재표면의 부식을 일으키는 붉은녹발생까지의 시간이 500시간으로 보다 높은 내식성을 나타내었다. 그리고 Cd-Ti 합금의 공정표준 및 Ti농도의 관리방법 등을 정리하여 보고한다.