• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.365-365
• /
• 2009

CBD 증착 방법은 저비용으로 양질의 CdS 박막을 얻을 수 있는 증착 밥법으로, 고효율의 CdTe/CdS 태양전지를 얻기에도 적당하다. CdS 박막의 증착 과정에서 수산화 암모늄 (ammonium hydroxide) 은 박막의 특성을 결정하는 주요한 요소 인자 이다. ITO가 증착된 유리기판위에 CdS 박막 증착 과정에서 동일한 조건에서 산화 암모늄 (ammonium hydroxide) 의 농도만을 조절하여서, XRD, Raman spectrometer, UV-Vis, SEM 분석 장치를 이용하여 구조 및 광학 특성의 변화를 살펴보았다.

• Resources Recycling
• /
• v.28 no.5
• /
• pp.51-59
• /
• 2019

This study focused on the synthesis of the nickel hydroxide using ammonium sulfate in leaching solution from waste nickel-cadmium batteries. The effect of pH, temperature and the input amount of ammonium sulfate in leaching solution was investigated. The ammonium nickel sulfate with high purity was obtained in acidic leaching solution and the solution temperature of $60^{\circ}C$. The suitable molar ratio of the input amount of ammonium sulfate to nickel in solution is 2:1. The impurity about 1.4 at.% of Cd was included in the nickel hydroxide precipitates when ammonium nickel sulfate was used. At the process using sodium sulfide which precipitates the cadmium in solution, nickel and iron compounds were precipitated together.

• Clean Technology
• /
• v.15 no.4
• /
• pp.253-257
• /
• 2009

The waste solution discharged form the LCD(Liquid Crystal Display) manufacturing process contains phosphoric acid, nitric acid, acetic acid and metal ions such Al and other impurities. In this study, vacuum evaporation and diffusion dialysis was developed to commercialize an efficient system for recovering the high-purity phosphoric acid and manufacturing monoammonium phosphate. By vacuum evaporation, almost 99% of nitric and acetic acid was removed. Also, by diffusion dialysis, about 97.5% of Al was removed. Monoammonium phosphate was manufactured from purified phosphoric acid and ammonium hydroxide. In order to get the optimum manufacturing condition, the molar ratio of ammonium hydroxide and phosphoric acid, pH and temperature was controlled. Using this optimum condition, we obtained the recovery rate of monoammonium phosphate of about 90%.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.1
• /
• pp.33-39
• /
• 2022

Batch experiments were conducted to find out the effects of various types of magnesium compounds on phosphorus recovery by magnesium ammonium phosphate (MAP) crystallization. The phosphorus recovery from the centrate of anaerobic digested sludge was performed using magnesium chloride, magnesium hydroxide and magnesium oxide under different pH (7.5, 8.0 and 8.5) and Mg/P molar ratio (1.0, 1.5, 2.0, 2.5) conditions. The phosphorus recovery rate increased with increasing pH and Mg/P molar ratio in all magnesium compounds. At pH 7.5, magnesium oxide showed the highest phosphorus recovery rate, followed by magnesium hydroxide and magnesium chloride. However, at pH 8.5, more than 90% of phosphorus recovery rate was obtained in all Mg/p molar ratios. Thus, it is expected that magnesium hydroxide and magnesium oxide are able to replace magnesium chloride as a magnesium source in terms of phosphorus recovery efficiency and cost.

• Resources Recycling
• /
• v.28 no.5
• /
• pp.68-73
• /
• 2019

Ilmenite is one of the principal ores for the production of titanium dioxide. To produce titanium dioxide with purity higher than 99.9% from ilmenite, Ti(IV) should be separated from the dissolved impurities such as Fe(III), Si(IV), and Mn(II) present in ilmenite. In this work, a hydrometallurgical process was investigated to recover pure titanium dioxide from ilmenite by HCl leaching followed by separation and hydrolysis of Ti(IV). An optimum leaching condition was obtained by investigating the effect of HCl concentration, pulp density, and leaching time on the leaching percentage of Ti(IV), Fe(III), Si(IV), and Mn(II). Ammonium hydroxide and sodium hydroxide solutions were employed as neutralizing agents to hydrolyze Ti(IV) from the stripping solution of Ti(IV). Titanium dioxide of the anatase phase was obtained by calcination of the hydrolyzed precipitates with $NH_4OH$ solution. A hydrometallurgical process can be developed to produce pure $TiO_2$ powders from ilmenite.

• New & Renewable Energy
• /
• v.5 no.1
• /
• pp.26-31
• /
• 2009

The surface etching characteristics of single crystalline silicon wafer were investigated using potassium hydroxide (KOH) and tetramethylammonium hydroxide (TMAH). The saw damage layer was removed after 10min by KOH 45wt% solution at $80^{\circ}C$. The wafer etched at high temperature ($90^{\circ}C$) and in low concentration (4wt%) of TMAH solution showed an increased etch rate of silicon wafer and wavy patterns on the surface. Especially, pyramidal textures were formed in 4wt% TMAH solution without alcohol additives.

• Journal of the Korean Chemical Society
• /
• v.52 no.5
• /
• pp.511-514
• /
• 2008

• Resources Recycling
• /
• v.15 no.5 s.73
• /
• pp.33-37
• /
• 2006

An equal-molar mixture of silver chloride (AgCl) and copper (Cu) was ground in atmosphere conditions using a planetary ball mill to investigate mechanochemical (MC) reaction for preparation of silver powders. The reaction causes the mixture of AgCl and Cu to change the composition of the mixture, such as silver (Ag) and cuprous chloride (CuCl). Through the leaching with ammonium hydroxide solution (1 mol), CuCl can be separated from MC product, so that pure Ag powders can be obtained as the final product. Moreover, polyvinylpyrrolidone (PVP) was used as the additive not only to improve dispersion of Ag pow- der during MC process, but also to control surface oxidation of Ag powders, prepared as the final product.

• Applied Chemistry for Engineering
• /
• v.31 no.3
• /
• pp.317-322
• /
• 2020

Hydroxylammonium nitrate (HAN; NH₃OHNO₃) is an ionic energy material having a low melting temperature and vapor pressure with a high oxygen balance. To utilize it as an oxidizer for a high content liquid mono-propellant, a dual solvent was used to obtain HAN in a solid particulate form. The dehydrated crystal from an aqueous HAN was washed with dual organic solvents including acetone and ethanol, finally resulting in the moisture content of 13.8 wt%. When acetone was applied as a single solvent, the maximum synthesis yield of 88%, the HAN content evaluated by TGA of 86.2%, and the decomposition temperature ranged 160℃ to 205℃ were achieved.

• Journal of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.149-155
• /
• 1988

Pentasil zeolites, including ZSM-5, ZSM-8, ZSM-11 and silicalites, were synthesized using various organic cations. Synthesis run was carried out in a Parr pressure reactor of $2{\ell}$ capacity and a self-constructed reactor with a magnetic stirring system. The reactant materials used are colloidal silica (Snowtex), sodium aluminate, sodium chloride, TEA, TPA, TBA, Choline and water. The composition of starting materials and the reaction temperature were found to be important factors for the synthesis of uniform pentasil zeolites.