• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.386-386
• /
• 2010

최근 널리 보급되고 있는 치과용 임플란트는 티타늄(Ti) 또는 티타늄 합금(Ti-6Al-4V) 보철과 크라운을 연결하여 사용하고 있다. 티타늄은 생체 친화성이 우수하나, 생체 활성도가 없어 치유기간이 긴 단점이 있다. 이를 보완하기 위해 인체 경조직과 유사한 수산화아파타이트(hydroxyapatite, $Ca_{10}(PO_4)_6(OH)_2)$를 티타늄 임플란트 표면에 코팅하는 방법이 연구되고 있으나 수산화아파타이트 코팅은 티타늄과의 접착성이 나쁘기 때문에 시술 및 사용과정에서 코팅층이 임플란트로부터 박리되는 문제점이 있다. 본 연구에서는 티타늄과 수산화아파타이트 사이에서 접착력을 향상시키는 buffer layer로서 지르코니아(8YSZ, 8mol% Yttria-stabilized zirconia)를 연구하였다. 지르코니아는 고온에서 안정하며, 티타늄 합금과 수산화아파타이트 사이의 반응을 방지하며, 박막밀도와 기계적 강도가 좋은 생체세라믹스이다. 지르코니아 박막을 펄스 레이저 증착법을 이용하여 증착 온도 $600^{\circ}C$, 레이저 fluence $2\;J/cm^2$에서 산소($O_2$) 분압을 바꿔 가며 증착하였다. 그 위에 수산화아파타이트 박막을 역시 펄스 레이저 증착법으로 증착하였다. Scratch test와 Pull-off test를 통해 접착력을 평가한 결과 지르코니아 buffer layer 삽입에 의해 티타늄 합금과 수산화아파타이트 사이의 접착력이 향상되었음을 확인하였다. 또한 산소분압이 박막의 특성 및 접착력에 미치는 영향을 고찰하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.3
• /
• pp.144-148
• /
• 2002

Hydroxyapatite/titanium composites were prepared as 4-layered functionally graded materials (FGM) using a spark plasma sintering (SPS) apparatus. The maximum density and the biaxial strength of hydroxyapatite/titanium composites were achieved by SPS with a holding time 8 minutes at $1200^{\circ}C$. However, the hydroxyapatite was decomposed tetracalcium phosphate (TetCP) at $1100^{\circ}C$, and calcium titanate compounds ($CaTiO_3$) were formed. When titanium was added to hydroxyapatite, decomposition of hydroxyapatite was occurred easily at the low temperature.

• 대한치과보철학회:학술대회논문집
• /
• 1994.12a
• /
• pp.13-13
• /
• 1994

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.82.2-82.2
• /
• 2000

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.10a
• /
• pp.126.1-126
• /
• 2000

• Proceedings of the Korean Ceranic Society Conference
• /
• 2002.10a
• /
• pp.127.1-127
• /
• 2002

• Applied Chemistry for Engineering
• /
• v.5 no.4
• /
• pp.714-721
• /
• 1994

Titanium and zirconium-containing MFI type zeolites have been prepared hydrothermally. Incorporation of titanium or zirconium into the framework of zeolite has been demonstrated by XRD, FT-IR, $^{29}Si$ MAS NMR analysis, and the catalytic benzene hydroxylation or n-hexane oxidation was used for checking the properties of catalysts. Pure titania and zirconia powder showed no catalytic activity at all for these reactions but Ti and Zr modified zeolite had the high activities in both reactions. The catalytic activity strongly depended on the kind of solvents, and the conversion of benzene or n-hexane increased with the increasing content of Ti and Zr in zeolites.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.1
• /
• pp.1-7
• /
• 2018

Purpose: The purpose of this study is to investigate the effect of the titanium implant soaked in saline after RBM surface treatment on the initial osseointegration by comparing the removal torque and the surface analysis compared to the titanium implant with only RBM surface treatment. Materials and methods: The control group was RBM surface treated implants (RBM), and the test group was implants soaked in saline for 2 weeks after RBM surface treatment (RBM+Sal). The control and test group implants were placed in the left and right tibiae of 10 rabbits, respectively, and at the same time, the insertion torque (ITQ) was measured. After 10 days, the removal torque (RTQ) was measured by exposing the implant site. FE-SEM, EDS, Surface roughness and Raman spectroscopy were performed for the surface analysis of the new implant specimens used in the experiments. Results: There was no significant difference in insertion torque and removal torque between RBM surface treated titanium implants and saline-soaked titanium implants after RBM surface treatment. Conclusion: Saline soaking after RBM surface treatment of titanium implants did not positively affect the initial osseointegration as compared to titanium implants with only RBM surface treatment.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.1
• /
• pp.44-48
• /
• 1997

During studies of the ripening reaction of titanium oxalate, a new crystalline phase has been found. The crystal system was determined to be orthormbic with space group $C222_1$. The unit cell parameters were refined to a=10.503(2)$\AA$ b=15.509(3)$\AA$ c=9.7000(1)$\AA$. The chemical formula of the crystal is Ti$_{2}$O$_{2}$(C$_{2}$O$_{4}$)(OH)$_{2}$. H$_{2}$O. When heated to temperatures between 31$0^{\circ}C$ and 38$0^{\circ}C$, the material became amorphous. Heated above 41$0^{\circ}C$ converted it into anatase-type titanium dioxide.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.333-340
• /
• 2011

Purpose: The aim of this study was to study the effect of hydroxyapatite (HA) coating crystallinity on the proliferation and differentiation of human osteosarcoma cells. Materials and methods: Surface roughness of the titanium disks increased by anodizing treatment and then HA was coated using ion beam-assisted deposition (IBAD). HA coating was crystallized by heat-treated at different temperature ($100^{\circ}C$, $300^{\circ}C$, $500^{\circ}C$, $800^{\circ}C$). According to the temperature, disks were divided into four groups (HA100, HA300, HA500, HA800). With the temperature, crystallinity of the HA coating was different. Anodized disks were used as control group. The physical properties of the disk surface were evaluated by surface roughness tests, XRD tests and SEM. The effect of the crystallinity of HA coating on HOS cells was studied in proliferation and differentiation. HOS cells were cultured on the disks and evaluated after 1, 3, 5, and 7 days. Growth and differentiation kinetics were subsequently investigated by evaluating cell proliferation and alkaline phosphatase activity. Results: Regardless of the heat-treated temperature, there is no difference on the surface roughness. Crystallinity of the HA was appeared in the groups of HA500, HA800. HOS cells proliferation, ALP activity were higher in HA500 and HA800 group than HA100 and HA300. Conclusion: Within the results of this limited study, heat treatment at $500^{\circ}C$ of HA coating produced by IBAD has shown greater effect on proliferation and differentiation of HOS cells. It is considered that further in vivo study will be necessary.