• International Journal of Highway Engineering
• /
• v.7 no.1 s.23
• /
• pp.31-38
• /
• 2005

Concrete has higher vapor pressure than its surrounding ambient air immediately after placement. Moisture at concrete surface evaporates to the ambient air to adjust equilibrium of the vapor pressure between them. The moisture inside the concrete moves to the surface because the evaporation at the surface causes gradient of vapor pressure inside the concrete. Plastic cracking, degree of hydration, strength development, and others caused by velocity of the moisture movement significantly influences quality of concrete. In this paper, the moisture diffusivity of early-age concrete was back-calculated using governing equation of the moisture diffusion, and temperature and relative humidity of concrete measured in a laboratory. The moisture diffusivity of the concrete was modeled using the back-calculated moisture diffusivity. The relative humidity of the concrete calculated by finite element method (FEM) using the modeled moisture diffusivity as Input data coincided with the measured relative humidity well.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.1
• /
• pp.84-97
• /
• 2017

Water vapor and thermal transmission properties of high emotional garments are important to evaluate wear comfort; in addition, the measuring methods of these properties are also critical for breathable and warm suit fabrics. In this study, the water vapor and thermal properties of composite yarn fabrics made of CoolMax, Tencel, and Bamboo fibers with filaments were measured and compared according to the measuring method. Water Vapor Transmittance (WVT) of the fabric woven by the sheath/core composite yarn in the warp direction was the highest due to the small staple fiber volume in the sheath/core yarn structure and high air voids in the sheath/core yarn fabrics. This property was also the highest in fabrics woven by bamboo staple yarns in the weft direction, and was the lowest on hi-multi filament fabrics. However, water vapor resistance ($R_{ef}$) of these fabrics by KSK ISO 11092 showed the opposite results to the water vapor transmittance method ($CaCl_2$ method); in addition, its correlation coefficient was low. The correlation coefficient between $R_{ef}$ and the drying rate was 0.719; therefore, the measurement mechanism of $R_{ef}$ is analogous to the drying property measurement. The thermal conductivity of the fabrics woven with compact staple yarn showed a high value; however, the hi-multi filament fabric showed low thermal conductivity. Therefore, fiber characteristics affect thermal properties more than yarn structure. The correlation between thermal property and moisture transport was also low. This study showed that: water vapor transmittance was active at the loose yarn structure, dry heat transport was vigorous at the compact yarn structure, and heat transport was affected more by fiber characteristics than yarn structure. In conclusion, sheath/core composite yarns were relevant to the high absorptive cool suit along with siro-fil and CoolMax/Bamboo staple yarns that were relevant to the heat diffusive cool suit.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.4
• /
• pp.105-112
• /
• 2016

The drying test was carried on the globular type cow manure pellet for use in solid fuel applications. The globular type cow manure pellet fuel was sorted according to size by rotatory sieves. The three kind of drying methods such as convection hot-air drying method, infrared ray drying method and superheated steam method were used to dry the globular type cow manure pellet. Among the three kind of drying methods, superheated steam method of dry time was the shortest. The apparent specific gravity and low calorific value of dried cow manure pelltes was about $250{\sim}350kg/m^3$ and above 3,000 kcal/kg respectively. The smaller the particle size of cow manure pellets, the less drying time was required. The time was required very less for drying smaller particle size cow manure pellet when compared to larger size. In the case of the same drying condition, it has been found that reducing the particle size of cow manure fuel pellet is an important factor for shortening the drying time of the livestock manure pellet.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.17-24
• /
• 2005

Korean pine (Pinus koraiensis Sieb.et Zucc.) boards of 30 mm thickness were treated by steaming and four different drying methods. Small specimens were taken from the sapwoods of the treated boards and their longitudinal liquid permeability was measured according to Darcy's law. The specimens were also extracted with alcohol and aceton solutions to examine the mechanism of liquid flow in wood. It was observed that specific permeability drastically decreases with measurement time, resulting in violation of Darcy's law. It may be due to that air bubbles formed under vacuum block flow paths in resin canals. The average specific permeabilities of non-extracted and extracted specimens are different from one treatment to another. It is supposed that the properties of residual resin in resin canals change depending on the conditions of treatments. Anatomical examination was conducted with a scanning electron microscope.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.4
• /
• pp.331-340
• /
• 2004

This paper presents a feasibility study of a fresh air load reduction system by using an underground double floor space. The fresh air is introduced into the double slab space and passes through the opening bored into the footing beam. The air is cooled by the heat exchange with the inside surface of the double slab space in summer, and heated in winter. This system not only reduces sensible heat load of the fresh air by heat exchange with earth but also reduces latent heat load of the fresh air by ad/de-sorption of underground double slab concrete. In this paper, we used a model for evaluation of fresh air latent heat load reduction by hygroscopic of air to earth exchange system taking into account coupled heat and moisture transfer of underground double floor space. In conclusion it shows the validity of the proposed method for a design tool and the quantitative effect of the system.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.55-64
• /
• 2003

Desiccation of a soil is basically the removal of water by evaporation, which is controlled by evaporativity and evaporability. Surface evaporation improves the trafficability which is essential for the access of construction equipment in the area reclaimed with soft clay. The existing traditional methods for evaluating evaporation can not account for the deformation of reclaimed soft soils during evaporation. Therefore, a theoretical model for predicting the rate of evaporation from the surface of a deformable material is proposed. The model is based on a system of equations for coupled heat and mass transfer in unsaturated soils. The modified pressure plate extractor test and glass desiccator test were carried out to obtain the soil-water characteristic curve for a deformable soil. The column drying test was conducted to investigate one dimensional water flow, heat flow and evaporation in the surface. A finite difference program was developed to solve the coupled nonlinear partial differential equations, which permit the study of water, vapor and heat flows in the deformable soil. Comparison between measured and simulated values shows a reasonably good matching between the two.