• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.21 no.1
• /
• pp.4-22
• /
• 2012

치경부에 발생된 병소 부위(cervical lesion)는 "우식성 병소(caries lesion)"와 "비우식성 병소(non-caries lesion)"로 분류할 수 있다. 우식성 병소는 구강 내 세균들의 활동에 기인하여 발생된 병소로서 경조직 손상 부위의 수복과 함께 우식이 재발하지 않도록 체계적으로 대응하는 것이 필요하다. 비우식성 병소는 산성 물질, 저작력 및 이물질에 의한 마모 작용과 같은 다양한 원인에 의해 발생될 수 있으며, 수복 치료에 앞서 병소에 발생 원인을 규명하는 것이 중요하다. 먼저 병소 유발 원인에 대한 분석과 이에 대한 적절한 조치를 취한 후에 수복 치료를 시행하는 것이 바람직하다. 심미적인 요구가 높은 치경부 병소의 수복을 위하여 사용될 수 있는 재료는 "불소를 방출하는 재료"와 "불소를 방출하지 않는 재료"로 나뉘어지는데, 세균의 활동에 의해 형성된 우식성 병소의 수복에는 불소를 방출하는 재료를 사용하는 것이 추천된다. 우수한 심미성과 보다 강력한 유지력이 요구되는 경우에는 복합 레진계 수복 재료들을 사용하여 수복하게 되는데, 이 경우에는 "접착 술식(bonding procedure)"이 중요한 역할을 수행하게 된다. "접착 술식"은 수복물의 일차적인 유지 뿐 아니라 지각과민을 해소하고 2차 우식을 방지하며, 궁극적으로 수복물의 수명을 좌우하는 결정적인 역할을 수행한다. 자연 치아를 최대한 보존하고자 하는 "최소침습(minimum intervention)" 개념에 바탕을 두고 세심하게 형성된 와동에 각각의 증례에 최적화된 수복 재료를 선택하여 수복치료를 시행한다면 보다 심미적이고 환자가 편안한 치경부 수복물을 완성할 수 있을 것이다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.520-529
• /
• 2003

Proper finishing and polishing of tooth restorations enhance the esthetics and the longevity of the restored tooth. The aims of this study were to identify an appropriate polishing system for each esthetic restorative material(Z250, Heliomolar, Dyract AP, Fuji II LC), and to compare the efficiency of polishing systems(Enhance, Sof-Lex, Composite). The control group remains untouched. The results were as follows: 1. There was no significant difference of surface roughness among the materials, while a roughness value of Z250 was the lowest of all. 2. The smoothest surface was produced by Mylar sheet on all materials. The polishing procedures, however, increased a roughness value. 3. The smoothest surfaces were produced by Sof-Lex, and there was significant difference of surface roughness between Sof-Lex and Enhance systems. 4. The smoother surfaces on the control group showed many scratches after the polishing procedures in the SEM findings.

• The Journal of the Korean dental association
• /
• v.58 no.7
• /
• pp.435-442
• /
• 2020

Porcelain is the first ceramic material to be introduced into dentistry. Porcelain jacket crown was introduced by Dr. Charles H Land in 1886, which was an excellent aesthetic dental restoration but has not been widely used due to high firing shrinkage and low tensile strength. Then metal-ceramic system, which combines the esthetic properties of ceramics and the mechanical properties of metals, was introduced and nowadays it is still used in dental clinical field. However, the metal-ceramic system has shown some problems, such as increased lightness by reflection of light at opaque layer, shadow beneath the gingival line due to the block-out of light by metal coping, exposure of metal in margin part, bond failure between metal and porcelain, oxidation of metal coping during firing the porcelain, etc. Recently, along with the advance of fabrication methods of dental ceramics, the all-ceramic restorations with high esthetic and mechanical properties has increased and gradually replaced metal-ceramic restorations. Especially, CAD/CAM technology has opened a new era in fabricating the dental ceramic restorations. This overview will take a look at the past, present and future possibility of the dental ceramic materials.

• Restorative Dentistry and Endodontics
• /
• v.30 no.6
• /
• pp.442-449
• /
• 2005

The purpose of the present study was to evaluate the relationship between the amount of cuspal deflection and linear polymerization shrinkage in resin composite and polyacid modified resin composite, For cuspal defelction and shrinkage measurement, Dyract AP, Compoglass F, Z100, Surefil. Pyramid, Synergy Compact, Heliomolar and Heliomolar HB were used. For measuring polymerization shrinkage, a custom made linometer (R&B, Daejon, Korea) was used The amount of shrinkage among materials was compared using One-way ANOVA analysis and Tukey's test at the $95\%$ of confidence level For measuring cuspal deflection of teeth, standardized MOD cavities were prepared in extracted maxillary premolars. After a self-etching adhesive was applied, cavities were bulk filled with one of the felling materials. Fifteen teeth were used for each material. Cuspal deflection was measured by a custom made cuspal-deflection measuring device. One-way ANOVA analysis and Tukey's test were used to determine differences between the materials at the $95\%$ of confidence level, Correlation of polymerization shrinkage and cuspal deflection were analyzed by regression analysis. The amount of polymerization shrinkage from least to greatest was Heliomolar, Surefil < Heliomolar HB < Z100, Synergy Compact < Dyract AP < Pyramid, Compoglass F (p<0.05). The amount of cuspal deflection from least to greatest was Z100, Heliomolar, Heliomolar HB, Synergy Compact Surefil < Compoglass F < Pyramid, Dyract AP (p < 0.05). The amount of polymerization shrinkage and cuspal deflection showed a correlation (p<0.001).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.3
• /
• pp.249-256
• /
• 2015

Restorative dental materials have advanced rapidly, with improved physical properties that improve survival rates. Accordingly, various materials can be selected. Amalgam, composite resin, glass-ionomer cement, and preformed stainless steel crowns have all been used widely for the restoration of dental caries in primary molars. The various dental materials used to treat proximal caries in the primary molars have distinct advantages and disadvantages. However, few studies have examined their survival rates. This retrospective study examined the 2-year survival rates of more than 700 class II restorations of proximal caries in primary molars clinically and radiologically according to the type of restoration. The study results should help in the selection of class II restorations for molars, one of the biggest concerns of pediatric dentists.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.3
• /
• pp.263-271
• /
• 2017

The objectives of this study were to classify the first permanent molars showing molar-incisor hypomineralization (MIH) on the basis of defect size and to assess differences in the prognoses of restorations performed with different materials. The first permanent molars with MIH and posteruptive breakdown were categorized into MIH class I, II, and III. After performing restorations, retreatment frequencies were examined according to the defect class and initial restorative material used. Sealants, composite resins, and stainless steel crowns showed the highest survival rates in cases of MIH class I, II, and III defects, respectively.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.4
• /
• pp.293-300
• /
• 2016

Purpose: The purpose of this study is finding proper bonding agents to be used when adding bis-acryl composite provisional materials. Materials and Methods: Three bonding agents with different chemical compositions were included in this study. Forty disk shaped specimens of bis-acryl composite provisional material were prepared and divided into 4 groups according to the bonding agents. Control group didn't have bonding agent. Through the Teflon mould with 4.0 mm diameter hole with 4.0 mm thickness the same bis-acryl composite provisional material was added on the disks after the surface of each specimen was treated with designated bonding agent according to the manufacturer's instructions. Shear bond test was performed and the fractured surfaces were inspected with a microscope. One-way analysis of variance was conducted and the result was further analysed with Turkey post hoc test at the significance level of 0.05. Results: The highest strength was acquired from the specimens bonded with chemical cure system and it was statistically significant (P < 0.05). This group showed 100% cohesive failures. The lowest bonding strength was recorded from the specimens used conventional light cure bonding agent, and this group's result was similar with the control group. The group used a light cure bonding agent claiming improved compatibility revealed significantly higher bond strength to the traditional light cure bonding agent group in a statistically significant way (P = 0.043). Conclusion: According to the bonding agent used the shear bond strength was significantly affected. Therefore the choice of proper bonding agent is important when hiring a bonding agent to add bis-acryl composite provisional materials.

• Restorative Dentistry and Endodontics
• /
• v.31 no.6
• /
• pp.460-469
• /
• 2006

This article complies a survey on the replacement of the posterior restorations and accesses possible factors that influence the replacement of posterior restorations. The data was collected from patients that visited department of conservative dentistry from Dec 1st 2003, to Sep 3rd 2004. Teeth was restricted to posterior permanent teeth. 9 dentists recorded age, gender of patients, tooth location, cavity farm and restorative material. They rated marginal adaptation, anatomic form, secondary caries of old restoration by modified Ryge criteria system. The statistical analysis was performed with Chi square test (p < 0.05) for replacement ratio according to patients, tooth factor and One way ANOVA was performed for comparison of old restoration according to restorative material. The results were as follows; 1. The female (62%) was statistically higher ratio than the male (38%). 2. The distribution of replacement case according to age, the rate of replacement was in descending order, 20's (38.3%), 40's (16.8%), 30's (15.9%), 10's (11.1%), 50's (9.2%), 60's (8.7%). 3. The rate of replacement was 88% for molar and 12% for premolar (p $gt; 0.05). 4. The rate of replacement was 39% for maxillar and 61% for mandible (p $gt; 0.05). 5. The material of restorations was amalgam (69%), gold inlay (17%), composite resin (13%). 6. In rating system by modified Ryge criteria system on margin adaptation, there was statistically significant difference between amalgam and gold inlay. But on anatomic form and caries, there was no statistically significant difference among the material of restorations.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.4
• /
• pp.329-339
• /
• 2015

Purpose: To investigate the information acquisition, selection criteria and selection methods of Mongolian dentists regarding adhesive agents for bonded restorations, and to provide future direction for continuing education. Materials and Methods: One hundred Mongolian dentists were interviewed and asked to complete a questionnaire containing 7 questions on general information about the responder, 8 questions on information acquisition and selection of bonded restoration agents, and 10 questions on continuing education. Results: Objective and credible information regarding bonded restoration materials were not being acquired, and logical material selection was not being made. The extent of continuing education was inadequate and not enough information regarding education was being acquired. The participants responded positively to online supplementary education. Conclusion: A systemized approach needs to be established in Mongolian dentistry to enable organized delivery of evidence-based guidelines and information, and logical selection of the numerous and various bonded restoration agents. Furthermore, the education of dentists, through various means, is required to enable proper use of the selected materials.

• The Journal of the Korean dental association
• /
• v.34 no.12 s.331
• /
• pp.855-860
• /
• 1996

치과용 복합레진은 bis GMA형의 monomer가 개발되고, 무기 filler가 첨가되어 물리적인 성질이 더욱 향상되었으며, 또한 법랑질에 대한 산부식법을 통하여 치아에 대한 결합력을 높을 수 있는 방법이 도입되면서 치과용 수복물로서 각광을 받아 왔다. 특히 복합레진은 이전까지 이용되었던 silicate cement 이나 acrylic resin에 비하여 변색이 적고, 원래의 형태를 비교적 잘 유지하는 장점을 가져서 전치부의 수복에 유용한 재료로 인식되었다. 복합레진을 이용한 전치부의 수복은 비교적 적은 치질의 삭제만으로도 가능하고, 심미적으로도 우수한 결과를 보이고 있어서 올바른 술식을 통하여 적절히 이용한다면 좋은 임상적인 결과를 얻을 수 있는 것이 사실이지만 재료학적인 한계가 아직 까지는 엄연히 존재한다. 복합레진을 이용한 전치부의 수복에 있어서, 복합레진의 문제점과 이를 줄이기 위한 방법, 임상시의 주의점 등에 관해 살펴보도록 한다.