• Journal of the Korean Geosynthetics Society
• /
• v.5 no.4
• /
• pp.11-18
• /
• 2006

Geotextile has been used for various types of containers, such as small hand-filled sandbags, 3-dimensional fabric forms for concrete paste, large soil and aggregate filled geotextile gabion, prefabricated hydraulically filled containers. They are hydraulically filled with dredged materials and have been applied in coastal protection and scour protection, dewatering method of slurry, temporary working platform for bridge construction, temporary embankment for spill way dam construction. Recently, geotextile tube technology is no longer alternative construction technique but suitable desired solution. The paper presents the stability behavior of geotextile tube composite structure by 2-D limit equilibrium and slope stability analysis. 2-D limit equilibrium analysis was performed to evaluate the stability of geotextile tube composite structure to the lateral earth pressure and also transient seepage and stability analysis were conducted to determine the pore pressure distribution by tide variation and slope stability. Based on the results of this paper, the three types of geotextile tube composite structure is stable and also slope stability of overall geotextile tube composite structures is stable with the variation of tidal conditions.

• The Journal of Engineering Geology
• /
• v.16 no.2 s.48
• /
• pp.125-134
• /
• 2006

In order to establish the in-situ application of the artificial storage and recovery (ASR) technology which is used the property of the aquifer storage of groundwater. We carried out to the in-situ experiments such as borehole TV logging, pumping test and artificial hydraulic fracturing in volcanic island, Ulleungdo. In-situ experiments were conducted to divide the before- and after-hydraulic fracturing. Pumping test was achieved to confirm the two fracture zones, GL-13m and GL-21m, which are determined by the borehole TV logging. From the results of the before- and after-pumping tests, the hydraulic connectivity was confirmed to locate at GL-13m in the residual deposit zone of pumice media as alluvium. However, in the bedrock tone at GL-21m the hydraulic connectivity could be considered to faulty. Consequently, in this study area the artificial recharge has a little unsatisfied to geo-structural condition and desired to more detail investigation works.

• Ecology and Resilient Infrastructure
• /
• v.2 no.2
• /
• pp.137-146
• /
• 2015

Lateral connectivity between a main channel and a former channel plays an integral role in maintaining ecological functions of stream-floodplain ecosystems. This study virtually restored the connectivity of the former channel, which is currently isolated by channelization, in the Mangyeong River, Korea. Fish habitat improvement after the connectivity restoration was evaluated using River2D, two-dimensional depth-averaged hydraulic modeling, depending on normal and flood flow conditions. Target fish species were crucian carp (Carassius auratus), which are known as lentic species, and pale chub (Zacco platypus), known as lotic species. The weighted usable area (WUA) of the two species was increased after the connectivity restoration: the two-way connection between the main and formal channels was more effective than the one-way connection. The result of the physical habitat simulation at a flood flow condition demonstrated an increased rate of the WUA than during a normal flow condition. In particular, the WUA of pale chub increased about four times on the two-way connectivity restoration. This result suggests that habitat availability of both lentic and lotic fish species will increase after a connectivity restoration, and a two-way connectivity restoration may be more effective. In addition, the restored formal channel would function as a shelter for fish during the flood season.

• Journal of Environmental Impact Assessment
• /
• v.28 no.6
• /
• pp.507-524
• /
• 2019

The purpose of this study was to validate the EFDC model for the weir pool of Gangjeong-Goryong Weir located in Nakdong River, and evaluate the effect of flow control and phosphate loading reduction on the water quality and algae biomass by group (Diatom, Green, Cyanobacteria). As a result of model validation using 2018 experimental data,the time series of water level and vertical distribution of water temperature, DO, organic matter, nitrogen, and phosphorus time series were properly simulated. Seasonal fluctuations of algae biomass by group were adequately reproduced, but the deviations between measured and simulated values were significant in some periods. As a result of scenario simulations to control the water level and flow rate, the thermal stratification was resolved as the water level was lowered and the flow rate increased. The flow velocity at which the water temperature stratification was resolved was about 0.1 m/s, which is consistent with the previous study results of Baekje Weir in Geum River. Simulations of the 2Q flow scenario showed that Chl-a decreased by 8.7% and the cell density of diatom and green algae declined. The cell density of cyanobacteria increased, however, because the high concentrations of cyanobacteria in the upstream boundary conditions directly affected downstream due to increased flow velocity. In the scenario simulation of reducing the influent phosphate load concentration (average 0.056 mg/L) to 50%, Chl-a decreased by 13.6%.The results suggest that the upstream algae concentration and phosphorus load reduction should be considered simultaneously with hydraulic control to prevent algal overgrowth of Gangjeong-Goryong Weir.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.557-565
• /
• 2016

The risk of collapse in hydraulic structures has become more elevated, due to the increased probability and scale of flooding caused by global warming and the resulting abnormal climatic conditions. When a levee, a typical hydraulic structure, breaks, an enormous breach flow pours into the floodplain and much flood damage then occurs. It is important to accurately calculate the breach discharge in order to predict this damage. In this study, the variation of the breach discharge with the asymmetry in the cross-section of the levee breach was analyzed. Through hydraulic experiments, the cross-section of the breach was analyzed during the collapse using the BASD (Bilateral ASymmetry Degree), which was developed to measure the degree of asymmetry. The relationship of the breach discharge was identified using the BASD. Additionally, the variation of the breach flow measured by the BASD was investigated through a 3-D numerical analysis under the same flow conditions as those in the experiment. It was found that the assumption of a rectangular breach cross-section, which is generally used for the estimation of the inundation area, can cause the breach discharge to be overestimated. According to the BASD, the breach flow is decreased by the interference effect in the breach section of the levee. If the breach flow is calculated while considering the BASD in the numerical analysis of the flooding, it is expected that the predicted inundation area can be estimated accurately.

• Tunnel and Underground Space
• /
• v.21 no.5
• /
• pp.394-405
• /
• 2011

In this paper, we applied coupled non-isothermal, multiphase fluid flow and geomechanical numerical modeling using TOUGH-FLAC coupled analysis to study the complex thermodynamic and geomechanical performance of underground lined rock caverns (LRC) for compressed air energy storage (CAES). Mechanical stress in concrete linings as well as pressure and temperature within a storage cavern were examined during initial and long-term operation of the storage cavern for CAES. Our geomechanical analysis showed that effective stresses could decrease due to air penetration pressure, and tangential tensile stress could develop in the linings as a result of the air pressure exerted on the inner surface of the lining, which would result in tensile fracturing. According to the simulation in which the tensile tangential stresses resulted in radial cracks, increment of linings' permeability and air leakage though the linings, tensile fracturing occurred at the top and at the side wall of the cavern, and the permeability could increase to $5.0{\times}10^{-13}m^2$ from initially prescribed $10{\times}10^{-20}m^2$. However, this air leakage was minor (about 0.02% of the daily air injection rate) and did not significantly impact the overall storage pressure that was kept constant thanks to sufficiently air tight surrounding rocks, which supports the validity of the concrete-lined underground caverns for CAES.

• Current Research on Agriculture and Life Sciences
• /
• v.16
• /
• pp.15-23
• /
• 1998

This experiment did comparison and analysis that protected soil particle migration have affect on function of the filter and therefore fall function of the filter. Results obtained are as follows: 1.High water head makes to be much movement of fine sand and out flow of particle to the outside. The filter have large opening size that reached stability an early stage, but much fine sand is washed away. If the velocity turns fast and becomes small, blocking phenomenon is remarkable nearby the filter-sand interface. 2. The movement of fine sand that effect on function of filter depend on opening size and change of water head. Under the same condition, USCE filter and USSPL filter is reached earlier than other filter that is stability of stage, because it's opening size is large. 3. Residual quantity of fine sand migration was largly come out in order of USSPL, USCE, USBR, Newton & Hurley, Bertram filter. 4. The time required to stability of flow was taken less in order of Bertram, Newton & Hurley, USBR, USSPL, USCE filter and coefficient of permeability was highly come out in order of USBR, Bertram, Newton & Hurley, USSPL, USCE filter. 5. It proved that USCE and USSPL is suitable for the filter criteria.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.6
• /
• pp.722-728
• /
• 2012

Urban sewer systems has a limitation of capacity of rainwater storage and problem of occurrence of untreated sewage, so adopting a storage facility for sewer flooding prevention and urban non-point pollution reduction has a big attention. The Korea Ministry of Environment has recently introduced a new concept of "multi-functional storage facility", which is crucial not only in preventive stormwater management but also in dealing with combined sewer overflow and sanitary sewer discharge, and also has been promoting its adoption. However, reserving a space for a single large-scale storage facility might be difficult especially in urban areas. Thus, decentralized construction of small- and midium-sized storage facilities and its operation have been introduced as an alternative way. In this paper, we propose a model predictive control scheme for an optimized operation of distributed storage facilities and sewer networks. To this aim, we first describe the mathematical model of each component of networks system which enables us to analyze its detailed dynamic behavior. Second, overflow locations and volumes will be predicted based on the developed network model with data on the external inflow occurred at specific locations of the network. MPC scheme based on the introduced particle swarm optimization technique then produces the optimized the gate setting for sewer network flow control, which minimizes sewer flooding and maximizes the potential storage capacity. Finally, the operational efficacy of the proposed control scheme is demonstrated by simulation study with virtual rainstorm event.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.5
• /
• pp.314-319
• /
• 2019

The numerical simulation method was used to analyze the flow velocity change and mechanical coefficient characteristics of the blade in the shroud system that changes with the initial flow velocity and the blade rpm. In the analysis condition, the initial flow velocity was varied from 0.35 m/s to 1.0 m/s, and the blade rpm varied from 50 rpm to 300 rpm. Through this, the mechanical coefficient was estimated. The flow velocity changes tended to increase more than 1.8 times at the middle point compared to the inlet. When the flow velocity ratio was 0.75 m/s compared to the initial flow velocity of 0.5 m/s, the flow velocity ratio decreased. The mechanical coefficient using the torque of the blade also showed the highest coefficient at 0.5 m/s, and the trends were similar. On the other hand, the maximum coefficient was estimated to be about 20.88% in TSR 4.77 when the initial flow velocity was 0.5 m/s. The mechanical coefficient analysis of blades in this study is expected to provide the basic data for hydraulic model experimental.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.544-544
• /
• 2015

국내에는 17,500여개의 농업용 저수지가 전국적으로 분포하고 있으며, 이들 저수지는 인공호소이다. 농업용 저수지의 총 유효저수량은 2,838백만$m^3$에 달하고 있으며, 전체 수리답의 약 76%에 해당하는 593천ha의 농경지에 물을 관개하고 있다(2013농업생산기반통계연보). 최근 농어촌지역의 도농복합형태 개발 및 관광지, 유원지화로 농업용 저수지 유역의 오염원이 지속적으로 증가하는 추세에 있으며, 이로 인해 농업용수 수질이 지속적으로 악화되고 있다. 특히, 늦봄에서 초가을까지 외기온도 상승 및 저수율 저하와 함께 부영양화 증가, 녹조 대발생 등으로 수질오염도가 급상승하고 있으며, 이로 인해 호 내 물고기 폐사, 악취발생 등으로 민원이 다수 발생하고 있다. 본 연구에서는 농업용 저수지의 물리적 특성을 분석하여 농업용 저수지 수질개선을 위한 기초자료로 활용하고자 하였다. 농업용 저수지 17,489개소를 수혜면적별로 분류해 보면 5ha이하가 7,808개소(44.7%), 5~10ha이하 4,277개소(24.5%), 10~20ha 2,772개소(15.9%), 20~30ha 797개소(4.6%), 30~40ha 385개소(2.2%), 40~50ha 238개소(1.4%), 50ha이상 1,201개소(6.9%)로 구성되어 있어 50ha이하가 전체의 93.1%에 이르고 있다. 유효저수량별 분포현황은 10천$m^3$이하가 7,996개소(45.7%), 10~50천$m^3$ 6,420개소(36.7%), 50~100천$m^3$ 1,003개소(5.7%), 100~300천$m^3$ 868개소(5.0%)로 전체 시설 중 50천$m^3$이하가 전체 저수지의 82.4%로 대부분이 소규모 저수지임을 알 수 있다. 농업용 저수지를 유효수심별로 구분해보면 1m이하가 전체의 26.6%, 3m이하가 전체의 77.1%, 5m이하가 전체의 91.1%로 국내 대부분의 저수지들은 수심이 5m 이하의 저류지 형태의 저수지임을 알 수 있다. 저수지를 유역배율(유역면적/만수면적)에 따라 구분해보면 유역배율 3이하가 전체의 1.2%이고, 5이상이 전체의 97.4%를 차지하고 있다. 일반적으로 유역배율이 3이상이면 부영양화에 취약한 호소로 분류되고 있다. 국내 농업용 저수지는 대부분이 수심이 낮고, 유효저수량이 소규모이며, 유역배율이 3이상인 호소가 대부분으로 태생적으로 수질오염 및 부영양화에 취약한 구조로 되어 있음을 알 수 있다. 농업용 저수지 수질개선을 위한 종합계획 수립시에는 유입수 및 호내 대책과 함께 호소의 물리적 조건을 개선시키는 방안에 대해서도 검토가 요구된다. 특히 저수지 신규 설치시에는 수량관리 뿐만 아니라 수질도 함께 고려된 물리적 인자에 대한 설계가 이루어져야 할 것으로 판단된다.