• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.21 no.2
• /
• pp.281-313
• /
• 1976

To obtain fundamental informations on cotton breeding efficiences for Korea, individual genetic relationships and interrelationships between the agronomic characteristics of Upland cotton were investigated. These experiments were couducted at the Mokpo Branch Station $(34^{\circ}48'N, $ $126^{\circ}23'E$ and altitude of 10m above sea level) from 1969 through 1972. Heterosis, combining ability, dominance and recessive gene action, genetic variance, and phenotypic and genotypic correlation were investigated by $F_1'S$ from an 11-parent partial diallel cross and the segregating $F_2$ and $F_3$ populations of the cross Paymaster times Heujueusseo Trice. The following points resulted from this study, 1. Heteroses for number of bolls per plant and lint yield were significant at 27, 84% and 37.26%, respectively. No other character had significant heteroses. 2. The GCA estimates for all studied characteristics were higher than the SCA estimates. Varieties with high GCA effects were Suwon 1 for earliness, Paymaster and Arijona for high lint percent, and Arijona for long fiber, etc, 3. SCA estimates for lint yield varied widely in crosses with Mokpo 4, Mokpo 6 and Heujueusseo Trice. Those crosses with the highest SCA effects were combinations with large characteristics differences, Example of these crosses are Mokpo 4 times Acala 1517W, Mokpo 4 times D. P. L. and Heujueusseo Trice aud Paymaster. 4. Early-maturing varieties were completely dominant to late-maturing varieties in some combinations while other crosses gave intermediate phenotypes. These results suggest additive genetic action by multi-genes. Heujueusseo Trice, Mokpo 6, and Suwon 1 showed highest degree of dominance for earliness. 5. There were no significant trends for inheritance of weight of boll and 100 seeds weight. 6. Long staple was partially to completely dominant to short staple. Though there were single gene ratios the rate of dominance decreased in the $F_2$ and $F_3$ populations in the cross between the long staple variety Paymaster and the short staple variety Heujueusseo Trice. Diallel cross $F_1$ hybrids showed complicated allelic gene action for staple length. Various dominance degree were shown by varieties. 7. Number of bolls per plant indicated strong over-dominance and small non-allelic additive gene action. 8. Lint Yield was characterized by over-dominance and by multiple non-allelic-gene action. High-yielding varieties were dominant to low-yielding ones. However, the low-yielding variety Heujueusseo Trice showed over-dominance, indicating different reactions according to the varieties and combinations. 9. Broad sense heritability for days to flowering was 34-39% while narrow sense heritability was 11%. Large variations of individual plants caused by Korean climatic conditions cause this situation. Heritability estimates for weight of boll was 30% for broad sense and 22% for narrow sense. 10. Heritability estimates for staple length and lint percent were very high suggesting strong selection effects. 11. Narrow sense heritability estimates for number of bolls per plant was 30% in the diallel cross $F_1$ hybrids and 36% in the $F_2$ population of the special cross. Broad sense heritability was estimated at 67% suggesting that. 12. Heritability estimates for lint yield was low due to high over-dominance in the diallel cross $F_1$ hybrids. Heritability estimates for yield was low in the $F_1$ hybrids but high in the $F_2$ and $F_3$ populations. 13. Phenotypic and genotypic correlations between lint percent and days to flowering and between staple length and days to flowering were high in the $F_1, $ $F_2$ and $F_3$ populations. Late-maturing varieties and individuals had long staple and high lint percent in general. As the correlation between days to flowering and lint yield was extremely low, the two traits were considered independent of each other. Days to flowering and number of bolls per plant were negatively correlated in the $F_3$ population, indicating early-maturing individual plants with many bolls may be readily selected. 14. Phenotypic and genotypic correlations between lint percent and staple length were high in $F_1, $ $F_2$ and $F_3$ populations. Accordingly, long staple varieties were high in lint percent. It was recognized that lint yield and lint percent were positively correlated in the diallel cross $F_1$ hybrids, and lint percent and staple length were positively correlated in the $F_2$ population, indicating that lint percent and staple length affect lint yield. 15. Lint yield was significantly and positively phenotypically correlated with number of bolls per plant in $F_1, $ $F_2$ and $F_3$ populations. A high genotypic correlation was also noted indicating a close genetic relationship. The selection efficiencies for a high-yielding variety can be increased when individual plants with many bolls are selected in later generations. The selection efficiencies for good fiber quality can be enhanced when individuals with long staple and high lint percent are selected in early generations.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.4
• /
• pp.401-411
• /
• 2015

Drought stress has detrimental effects on the seedling development, vegetative/ reproductive growth, photosynthesis, root proliferation, anthesis, anthesis-silking interval (ASI), pollination and grain yield in maize. Typically, two weeks before silking through pollination are an important time in maize life. Here we reviewed the effects of drought stress on growth, physiological/ molecular researches for drought tolerance, and breeding to genomics in maize. Drought stress during kernel development increases leaf dying and lodging, decreases grain filling period and grain yield. Physiological factors of drought stress/ effects are water content, water deficits, and water potential. Nowdays molecular marker assisted breeding method is becoming increasingly useful in the improvement of new germplasm with drought stress tolerance.

• ICROS
• /
• v.1 no.3
• /
• pp.92-100
• /
• 1995

본 연구에서는 페트리 네트를 사용하여 모델링된 이산 사건 시스템의 제어시 발생하는 충돌 현상을 해결하기 위하여 퍼지 개념을 사용하였다. 이를 통하여 페트리 네트로 시스템을 제어할 경우 발생하는, 큰 문제점인 외부 시스템과의 데이터 입출력 설정의 어려움을 해결하는 방법을 보였다. 또한 제시된 규칙 행렬의 단순성으로부터 쉽게 충돌 현상하의 우선 순위를 변화시킬 수 있다. 시스템을 제어하는 전문가의 지식이 모호하여 단순히 상수값으로 우선순위를 표현할 수 없는 경우에는 퍼지개념을 이용하여 해결하였다. 이러한 방법들은 소규모의 모터 자동 조립 시스템을 제어하는데 부품의 수량, 작업의 대기 상태를 퍼지화하여 규칙행렬을 만들어 제어신호를 발생시켰다. FMS, CIM을 제어할 때 발생하는 Scheduling 문제도 본 논문의 방법을 사용하면 해결할 수 있다고 본다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.25 no.4
• /
• pp.43-58
• /
• 1980

The study was intended to know the responses of the nitrogen application levels (3, 6, 9, 12 and 15kg ai per $1O^a$) to grain yield and quality of two-malting barley, Golden melon and Hyang maek in 1980. There was investigated chlorophyll content, dry weight, heading, grain yield, yield components, contents of protein, fat and carbohydrate and activity of $\beta$-amylase and invertase. Nitrogen increment was effective to increase of number of grains per spike and number of spikes per unit area, increase of protein content and decrease of $\beta$-amylase activity, but it was not recognized the yield increase under the 12% protein content.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.2
• /
• pp.179-185
• /
• 1986

This study was to compare year variations of heritability, phenotypic, genotypic and environmental correlations as well as pathway coefficients for main characters of tea tree to provide useful selection information for improving tea tree. The data collected from the performance yield trials from 1979 to 1981 were used in this study. I. The genetic variance of fresh fruit yielding, dryed fruit yielding and fresh weight of root was not only greatly varied with year, but also the largest among all characteristies studied. Other characteristics showed higher genetic variance than environmental variances, and year variances were not large. 2. Both year and variety x year interaction were highly significant sources of variation for all yield characteristics, and year variances were not large. 3. All characteristics showed high broad sense heritabilities, and the broad sense heritability was not varied with year. 4. The genetic correlation coefficients between fresh fruit yielding and dryed fruit yielding, fresh weight of root and Gigolpi, dryed weight of root and Gigolpi were positive, and the year variation was not large. S. The pathway coefficients of the character was not only greatly varied with year and the fresh weight of root affected directly on the Gigolpi.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.4
• /
• pp.360-369
• /
• 1988

This experiment was carried out to investigate the heritabilities, genetic correlations, path-coefficients, selection indexes and genetic advances for the desirable characteristics of naked-barley (Hordeum vulgare L.) in the central region of Korea. Genetic advances were calculated from selection indexes for each characters. It was considered that selection efficiency was increased in case it was calculated from the combination of two or three characters. These characters should be very useful agronomic characters for selection because they could be measured and counted easily, and thus it is also possible to save labour and expenses.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.1
• /
• pp.87-93
• /
• 1982

Dihaploid lines derived from the another of the $F_1$ of single cross, SC72 $\times$ Hicks (Nicotiana tabacum L.) were estimated the variation, heritablities, genetic correlations and path-co-efficients on agronomic characters and chemical compositions. Dinaploids exhibited reduced vigor and growth when comparecd with the mid-parent value but had increased nicotine contents, and the range of dihaploids characters were deviated more than that of their parents. Heritabilities of days to flowering, leaves per plant, nicotine. contents, leaf size and plant height appeared high value, and the yield, value per kg. and reducing sugar contents were low. There were positive genetic correlations between yield, and value per kg., leaf width, leaves per plant and reducing sugar contents and negative genetic correlations appeared between nicotine contents and the other characters except for index of leaf shape. Path-coefficient analysis of genotypic correlation coefficients showed that leaves per plant and leaf width lave a high direct effect, and plant height and days to flowering have a high indirect effect on yield, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.3
• /
• pp.241-247
• /
• 2001

Boundary line method was adopted to analyze the relationships between rice yield and meteorological conditions during rice growing period. Boundary lines of yield responses to mean temperature($T_a$) and sunshine hour( $S_{h}$) and diurnal temperature range($T_r$) were well-fitted to hyperbolic functions of f($T_a$) =$$\beta$_{0t}$(1-EXP(-$$\beta$_{1t}$ $\times$ ($T_a$) ) and f( $S_{h}$)=$$\beta$_{0t}$((1-EXP($$\beta$_{1t}$$\times$ $S_{h}$)), to quadratic function of f($T_r$) =$\beta$$_{0r}$(1-($T_r$ 1r)$^2$), respectively. to take into account to, the sterility caused by low temperature during reproductive stage, cooling degree days [$T_c$ =$\Sigma$(20-$T_a$] for 30 days before heading were calculated. Boundary lines of yield responses to $T_c$ were fitted well to exponential function of f($T_c$) )=$\beta$$_{0c}$exp(-$$\beta$_{1c}$$\times$$T_c$ ). Excluding the constants of $\beta$$_{0s}$ from the boundary line functions, formed are the relative function values in the range of 0 to 1. And these were used as yield indices of the meteorological elements which indicate the degree of influence on rice yield. Assuming that the meteorological elements act multiplicatively and independently from each other, meteorological yield index (MIY) was calculated by the geometric mean of indices for each meteorological elements. MIY in each growth period showed good linear relationship with rice yield. The MIY's during 31 to 45 days after transplanting(DAT) in vegetative stage, during 30 to 16 days before heading (DBH) in reproductive stage and during 20 days after heading (DAH) in ripening stage showed greater explainablity for yield variation in each growth stage. MIY for the whole growth period was calculated by the following three methods of geometric mean of the indices for vegetative stage (MIVG), reproductive stage (HIRG) and ripening stage (HIRS). MI $Y_{I}$ was calculated by the geometric mean of meteorological indices showing the highest determination coefficient n each growth stage of rice. That is, (equation omitted) was calculated by the geometric mean of all the MIY's for all the growth periods devided into 15 to 20 days intervals from transplanting to 40 DAH. MI $Y_{III}$ was calculated by the geometric mean of MIY's for 45 days of vegetative stage (MIV $G_{0-45}$ ), 30 days of reproductive stage (MIR $G_{30-0}$) and 40 days of ripening stage (MIR $S_{0-40}$). MI $Y_{I}$, MI $Y_{II}$ and MI $Y_{III}$ showed good linear relationships with grain yield, the coefficients of determination being 0.651, 0.670 and 0.613, respectively.and 0.613, respectively.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.8
• /
• pp.165-176
• /
• 2011

In this paper, we develop the cost minimization model to select two incentives and total order quantity with consideration of remanufacture company's return incentive. Return rate is sensitive to the incentive that the manufacture company offers. Using a EOQ(Economic Order Quantity) model of a cost minimization, we show concavities of the model about two incentives and total order quantity respectively. According to the proposed algorithm using the concavities, we find out the optimized incentive prices and total order quantity. Through numerical study, we examine sensitive analysis of the incentive price and order quantity for each parameter when the return rate is sensitive to incentive. Company lessens incentive to reduce total price. However, this makes the total price increase due to a diminution of return quantity. We expect that domestic or overseas remanufacture businesses are able to decide optimal incentive and total order quantity by this research.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.54-60
• /
• 2016

Building information modeling (BIM) has the advantage of having been utilized for various scenarios through a single model. Although extracting 2D drawings from BIM is one of the advantages, there are many difficulties when utilized in practical work. Architectural detail drawings are an important factor for expressing interior finishing materials and complicated construction methods, as well as for cost estimations. However, creating detail drawings does not have a standard, and each design company establishes its own detail drawings, so it is hard to share or exchange information in the construction industry. Therefore, this study suggests a systemized method for making detail drawings, and explains how it can be utilized as back data for quantity take-off and construction expenses linked with BIM libraries.