• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.4
• /
• pp.271-280
• /
• 1994

The aim of this experiment was to investigate the effects of fertilizing mineral nitrogen on dry matter yield of Reed canarygrass and also to estimate proper levels of fertilizing nitrogen when uncultivated rice paddy rapidly increased these days, was used for the production if Reed canarygrass. \ulcornerhe results are as follows. 1. Relative dry matter according to cutting frequency was appeared the highest at the 2nd cut for 3 and 4 cutting frequencies, and the 3rd cut for 5 cutting frequency. Those were 43.1, 34.0 and 34.1 % respectively. 2. When using only phosphrous and potassium, the average dry matter per year and ha was between 9.0 and 12.0 tons(3, 4 and 5 cutting frequency) and the highest dry matter was shown at 5 cutting frequency. 3. In accordance to the increase in the fertilization of nitorgen, the yield of dry matter was increased and, when 30 kg/ha/cut of mineral nitrogen was added, the biggest increase rate per added nitrogen for dry matter yield per year compared to that of no fe~tilization of nitrogen was recorded and it was 2.7, 3.3, and 3.4 tons/ ha for 3, 4 and 5 cutting frequencies respectively. 4. The efficiencies of mineral nitrogen on dry matter yield(DM kg/N kg) were the highest when 30kg nitrogen was applied particularly in 3, 4 and 5 cutting frequencies(29.7, 27.2, 22.8 DM kg/N kg). It recorded the highest of all the treatments. The efficiency was actually decreased in higher application of mineral nitrogen. The total nitrogen yield efficiency was the highest in 30kg(0.45kg and 0.48kg at 4 and 5 cutting frequency) and 60kg fertilization/ha/cut (0.46kg at 3 cuting frequency) and the decreased efficiencies appeared at fertilization of higher nitrogen. 5. Economical borden of mineral nitrogen fertilization were between 199.2 and 243.3kglha at 3 cutting frequency, between 253.4 and 295.9kg at 4 cutting frequency and between 302.2 and 361.3kg at 5 cutting frequency. 6. Under the condition of this experiment, the cutting frequency leading the potential production at maximum was 3 cutting frequency. At 3 cutting frequency, the efficiency of nitrogen utilization was higher and 15 or 16 tons of dry matter was obtained which is a level of economical border at fertilization between 200 and 240kglha. It wrs possible to obtain the maximal dry matter yield(l7 tonslha) at fertilization of lower level than 400kgl ha.

• Korean Journal of Plant Resources
• /
• v.27 no.1
• /
• pp.80-88
• /
• 2014

This study was carried out to understand the effect of sowing date on growth characteristics, flower duration of a total of 6 domestic rapeseed cultivars, "Sunmang", "Tammiyuchae", "Tamlayuchae", "Naehanyuchae", "Yongsanyuchae" and "Hallayuchae" with different sowing dates (25 Sept., 5 Oct., 15 Oct., 25 Oct., 5 Nov.) in Muan, Jeollanamdo, Republic of Korea. The results obtained were summarized as the follows: The number of seedling stand after overwintering was decreased in all 6 cultivars. It changed little until 5 Oct., and then showed continuously largely decrease as the sowing date being delayed. As the sowing date was being delayed, plant height was decreased while Silique length and thousand seed weight were increased. Seed yield in all 6 cultivars decreased almost linearly with late sowing date. In correlation analysis between the delaying sowing date and growth characteristics, it was inversely correlated with plant height ($r=-0.769^{**}$), No. of branches/plant ($r=-0.760^{**}$), No. of siliqua/panicle ($r=-0.631^{**}$) and seed yield ($r=-0.946^{**}$), while showed a positive correlation with silique length (r=0.635), seed diameter ($r=0.629^{**}$) and thousand grain weight ($r=0.422^*$). No. of seeds/silique and seed set percentage were not significantly correlated with the delaying sowing date. The flower duration was long in order of Sunmang, Tammiyuchae, Yongsanyuchae, Naehanyuchae, Hallayuchae and Tamlayuchae. Varietal variation of flowering date was larger with early sowing date than with delaying sowing date. The range of flower duration across all cultivars was from 1 day of Tamlayuchae to 14 days of Sunmang according to the sowing date, and the end flowering date was able to be extended from 2 to 9 days, compared to normal date of end flowering.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.509-509
• /
• 2015

물 수요관리측면에 대한 정책을 수립하기 위해서는 현재 또는 장래에 대한 용수수급의 정확한 이해를 필요로 한다. 이를 위해서는 용수 수요량 및 공급량뿐만 아니라 여러 산정요소를 필요로 하는데, 그 중 회귀수량은 물이 이용되고 다시 하천으로 회귀되어 이용될 가능성이 있는 수량으로 정의되며, 용수수급 및 용수절약 측면에서 회귀 수량은 중요한 요소라 할 수 있다. 회귀수량 조사는 유역조사 사업 이래, 10년간 생?공용수를 중심으로 미시적, 거시적으로 조사를 시행하였으나, 측정 자료의 신뢰도, 조사방법 및 지점선정 등의 문제로 인하여 조사 성과의 활용성이 매우 낮은 실정이다. 수자원장기종합계획등에서는 수자원관련 계획 수립시 생?공용수의 회귀율을 65 %로 적용하고 있으나, 이는 1970년대 말의 사회적 여건 및 경제적 상황이 반연된 결과로 현재 상황에 적용되기 곤란하다. 따라서, 현재 실정에 맞는 회귀율 산정은 반드시 필요하게 된다. 본 연구에서는 기존 생활용수 회귀수량 산정 연구 한계를 보완하고 유역조사 시행을 위한 개선된 회귀수량을 산정하고자 한다. 본 연구는 서울시 중랑물재생센터 처리구역을 기반으로 중랑천유역을 시험유역으로 선정하였다. 기존 회귀수량 산정방법을 개선하기 위해 시험유역 회귀수량 산정을 위한 가용 자료 분석 및 용수흐름 네트워크 공간분석을 추가로 진행하였다. 가용자료로 시험 유역내 상수공급자료(정수장 공급량, 상수계통도, 유수 및 누수율), 하수처리자료(하수처리구역도, 하수처리계통도, 유입량 및 방류량) 및 기상자료(기상청 지점 및 AWS 강우자료)를 구축하였고 각각의 상수계통도 및 하수처리계통도로부터 용수 흐름 네트워크망을 구축하였다. 상수공급자료로부터 상수계통도 공급지역을 구분하여 월별 유수율에 따른 월별 실 공급량을 산정하였다. 하수처리자료로부터 시험유역에서의 월별하수처리 유입량 및 방류량을 산정하였다. 최종적으로 회귀율(하수처리 방류량/실 공급량)을 산정한 결과 연평균 회귀율은 각각 93.97 %(2011년), 95.02%(2012년)로 과잉 추정 되었으며 7 ~ 9월의 회귀율은 110 ~ 120 %로 유입량을 초과하였다. 이는, 하수처리로 유입되는 유입량의 하수관거는 합류식으로 구축되어 7 ~ 9월에 많은 양의 강우량이 우수관을 통해 하수처리장으로 이송되어 생활용수 이외에 자연적인 공급량으로 인한 것으로 분석되었다. 따라서, 월별 회귀율 산정을 위해서는 불투수층에서의 면적강우량(mm)을 유입량(m3/s)으로 환산된 값을 고려하여 회귀율을 재산정하였다. 그 결과 연평균 회귀율은 각각 78.27 %(2011년), 77.58 %(2012년)로 나타났다.각각의 월별 회귀율도 매우 유사하게 나타났으며 과거 관용적으로 사용된 65 % 회귀율보다 약 12 ~ 13%로 증가하였으며 이는, 하수처리시설 구축 및 처리효율의 증가와 상수처리시설의 관로시설의 개량으로 인한 유수율 및 누수율 감소로 회귀율이 증가한 것으로 판단된다.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.147-152
• /
• 2015

In order to develop the cooling load estimation method in the greenhouse, the cooling load calculation formula based on the heat balance method was constructed and verified by the actual cooling load measured in the fog cooling greenhouse. To examine the ventilation heat transfer in the cooling load calculation formula, we measured ventilation rates in the experimental greenhouse which a cooling system was not operated. The ventilation heat transfer by a heat balance method showed a relatively good agreement. Evaporation efficiencies of the two-fluid fogging system were a range of 0.3 to 0.94, average 0.67, and it showed that they increased as the ventilation rate increased. We measured thermal environments in a fog cooling greenhouse, and calculated cooling load by heat balance equation. Also we calculated evaporative cooling energy by measuring the sprayed amount in the fogging system. And by comparing those two results, we could verify that the calculated and the measured cooling load showed a relatively similar trend. When the cooling load was low, the measured value was slightly larger than calculated, when the cooling load was high, it has been found to be smaller than calculated. In designing the greenhouse cooling system, the capacity of cooling equipment is determined by the maximum cooling load. We have to consider the safety factor when installed capacity is estimated, so a cooling load calculation method presented in this study could be applied to the greenhouse environmental design.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.22 no.1
• /
• pp.83-109
• /
• 1977

Isogenic lines for glabrous leaf (gl), hull color(gh) and glutinous endosperm (wx) were used to clarify the effects of the gl, gh and wx gene on the grain yield and yield components in rice plant. Eight genotypes: glgl ghgh wxwx, glgl ghgh WxWx, glgl GH-wxwx, glgl GH-WxWx, GL-ghgh wxwx, GL-ghgh WxWx, GL-GH-wxwx and GL-GH-WxWx were evalutated in the backcrossed $F_2$ generation. Significant effects were measured for gl genotypes on heading date, gh genotypes on grain fertility, and wxwx genotypes on number of panicles per hill and 1, 000 grain weight. The grain yield of straw hull and non glutinous lines were higher than gold hull and glutinous lines. The interaction of three genes, gl, gh and wx was significant for heading date, but not significant in other characters. The average value of isogenic lines which were combined with two recessive genes and one dominant gene were lower and the C.V. value was higher than the isogenic lines which were combined with two dominant genes and one recessive gene in all characters except plant height and number of grains per plant. The average value of isogenic line combined with three recessive genes was lower and the C.V. was higher than the isogenic line combined three dominant genes in all characters measured.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.3
• /
• pp.222-228
• /
• 1988

This experiment was carried out to investigate the effects of N levels (0,10,20,30kg/10a) and N split rates [the rates of basal＋top dressing 15 days after transplanting (DAT) : top dressing 25 days before heading (DBH) was 100 : 0, 80 : 20, 60 : 40 ] on the growth, yield, yield components, and N uptake of Seomjinbyeo (J) and Samgangbyeo (I${\times}$J). The maximum tillering stage occurred in the middle of July in both varieties, but Samgangbyeo showed the second maximum tillering stage in the middle of August probably due to the retarded early growth caused by low temperature in the tillering stage and to favoring temperature in August. Grain yield of Seomjinbyeo was similar among the N levels from 10 to 30 kg/10a without occurrence of rice blast and lodging, but that of Samgangbyeo increased as N level increased upto 30 kg/10a. Grain yield of Seomjinbyeo was higher when N was applied three times (basal and two top dressings 15 DAT and 25 DBH) compared with two times (basal and top dressing 15 DAT), but that of Samgangbyeo was not different among the N split rates. Total N uptake and the proportion of fertilizer N to the total N uptake increased as N level was higher. N uptake tended to be higher as proportion of basal＋top dressing 15 DAT increased in early growth stage, but it was higher as proportion of N applied 25 DBH increased in the late growth stage. The N efficiency to produce grain per absorbed N unit decreased as N level decreased in Seomjinbyeo, but similar in Samgangbyeo.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.3
• /
• pp.191-195
• /
• 1985

This field experiment was undertaken to assess the effects of three levels of inclination ($10^{\circ},\;20^{\circ},\;and\;30^{\circ}$) and four rates of $N-P_2O_2-K_2O$ (O-O-O, 14-10-20, 28-25-25, and 42-40-40kg/10a) on establishment, forage yield and quality and botanical composition of new established mixed grass-clover sward. This first part is concerned with the forage yield, yield component and botanical composition. The results obtained after a two-year experiment are summarized as follows: 1. Dry matter yields of mixed grass-clover sward were greatly decreased by increasing the inclination grade of hilly pasture, whereas it of weeds was not significantly influenced. Comparing with weeds, the establishment of introduced pastures was relatively low with increasing the grade of inclination. 2. By increasing the NPK rate, the yields of grasses and mixed forages and the rate of introduced pastures were greatly increased at all grades of inclination, whereas the change in the weed yield was not significant. 3. There were the differenced in the forage yield and yield component, and efficiency of fertilizers by the grade of inclination, which indicated the necessity of different management on the selection of suitable grass species, seeding rate, amount of fertilizer application, and the methods of grassland establishment, management and utilization.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.3
• /
• pp.259-270
• /
• 1985

Meteorological year variations for rice crop from 1973 to 1984 were compared by using air temperature and sunshine hour for nursery period, cooling index for reproductive stage and meteorological yield productivity index for ripening period. The most optimum transplanting date and heading date for crop yield based on real transplanting date-grain yield relationship or heading date-grain yield relationship, meteorological yield productivity index and actual results showed good agreement each other. Around May 26 for transplanting and August 10 for heading were the most optimum date in Indica/Japonica hybrid cultivars while these were about June 8 and August 23 for Japonica cultivars, respectively. On the other hand, theoretical late limiting heading date for safe ripening were August 20 for Indica/Japonica hybrid cultivars and August 30 for Japonica cultivars, respectively, for both methods, cumulative temperature method during ripening with 80% believable frequency and meteorological yield productive index method having 1000(kg/10a) yielding potential. Based on the yield forecast trial, the highest values of photosynthetic efficiency, 2.5%, and crop growth rate, 23g/㎡/day, were recorded during 30 days before rice heading. Considering the photosynthetic efficiency and solar radiation, the potential crop growth rate was more or less 30g/㎡/day and the biological grain yielding potential in a existing cultural practices was approximately 900-1000(kg/10a) in Milyang weather condition. To increase further yielding potential, either photosynthetic efficiency or harvest index or both should be improved by manipulating appropriate canopy architecture, plant spacing, fertilizer, chemical, etc.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.11a
• /
• pp.223-227
• /
• 1991

생산자동화가 필요한 분야 중에서도 대량생산을 유발하고 제품생산의 단납기화, 고품질화를 좌우하는 금형기술은 설계, 가공, 검사공정에 이르기까지 취급해야 할 생산정보의 양이 방대하고 많은 기술축적과 경험을 필요로 한다. 생산정보의 효율적인 처리를 위해 설계와 가공공정에 오래 전부터 컴퓨터가 도입되었으나 단일수량 제품이라는 금형의 특수성 때문에 각 공정에서의 생산정보가 상호 유기적으로 연계되지 않은 곳에서는 전체 생산공정의 총화된 효율향상을 성취하기가 어려웠다.(중략)

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1998.05a
• /
• pp.61-67
• /
• 1998

1973년과 1978년의 1,2차 Oil Shock로 인하여 정부는 대체에너지 개발을 입법화하여 태양열의 이용을 촉진시켜왔다. 그 후 약 20년간 태양열 이용에 대한 효과적인 집열과 축열기술의 개발에 연구가 추진되었으며, 집열판(Flat-plate collector)의 개발과 열교환기, 축열장치의 설계 등 효율향상을 통하여 건축의 난방, 온수급탕 등이 주종을 이루었다. (중략)