• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.670-671
• /
• 2016

자동화 수동변속기는 수동변속기에 액츄에이터를 설치하여 자동으로 수동변속기를 변속할 수 있게 한 변속기로써, 자동화 수동변속기의 조작 편의성과 수동변속기 수준의 높은 연비로 인해 대형 상용차에 많이 적용되고 있다. 대형 상용차에 적용되는 12단 자동화 수동변속기는 다른 자동 변속기와 마찬가지로 자동변속로직과 변속맵에 의해 변속시점을 결정하지만 기존의 방식으로는 변속충격, 클러치 마모, 연비저하 등의 문제점이 발생할 수 있다. 본 논문은 12단 자동화 수동변속기에 알맞은 변속로직 및 변속맵의 설계와 성능확인시험에 대한 내용을 다루고 있다.

• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.101-109
• /
• 2004

Three models with various degree-of-freedom for a manual transmission clutch full-size tester have been developed and the models' reliability and accuracy have been verified using the measured data. A simulation study has also been conducted to understand dynamic behavior of the tester. The model for this simulation study includes clutch disk friction and damper dynamics. The developed model is very accurate in terms of maximum torque exerted on the clutch, slip duration and the vibration response except a slight difference compared to the measured data. In a history graph of the clutch torque, the maximum torque response from simulation is flat but the measured is sunken with a noticeable curvature. This phenomenon is found to be irrelevant to the dynamics of the full-size tester but is originated from the characteristics of the clutch itself. Thus, the full-size tester has been proven to be a reliable tester for clutch's power and torque transmission capability. To obtain a better understanding of clutch's characteristics and relationship between full-size tester and other testing methodologies, future research directions have been suggested.

• 한국자동차공학회논문집
• /
• 제24권3호
• /
• pp.372-378
• /
• 2016

Clutch torque control is the key to the ride comfort improvement of a vehicle equipped with AMT (automated manual transmission). For such control, the torque transfer starting point, known as the "kiss point," should be indicated or at least estimated to compensate for the clutch torque. The kiss point changes due to wear, high temperature, and fatigue; as such, it should be estimated while the vehicle is being driven. In this study, the method of kiss point active estimation for an AMT vehicle with a dry-type clutch was devised. The kiss point is learned while the engine is in an idle state and while the transmission is at a neutral gear position. It is determined when the input shaft of the transmission starts to rotate by slowly engaging the clutch. The noise of the shaft speed signal during the slow engagement process is filtered for accurate control. The kiss point estimation at various clutch engagement speeds was analyzed via a vehicle test.