• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.456-457
• /
• 2010

매트릭스컨버터는 부하이외에 시스템의 에너지 저장소자가 없다. 이에 시스템의 스위칭에 의한 고조파 잡음도 계통으로 직접적으로 유입되기 쉬운 시스템이기에 이에 적합한 입력필터설계가 필요하다. 본 논문에서는 기존에 제시되어 있는 LC필터 및 LCL필터에 대하여 고찰한 후, 매트릭스컨버터에 적합한 필터 설계기법 및 수동댐핑저항에 대한 손쉬운 선정기법을 제안하였다. 그리고 제안한 기법에 대한 타당성을 시뮬레이션에 의해 검증한다.

• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.206-208
• /
• 2004

본 논문에서는 LabIEW를 이용하여 필터(RF 수동회로)의 주파수 특성을 테스트하고 테스트한 필터의 특성정보를 관리하는 필터 품질 자동화 시스템을 개발하였다. 개발된 시스템은 LabVIEW에 의해 GPIB 통신으로 계측장비 네트워크 어날라이저를 제어하며 제작된 필터의 S파라미터를 측정하여 명세 기준에 적합하게 제작되었는지를 판별하며 그 결과를 Mysq데이터베이스에 저장하고 관리하게 된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.49-55
• /
• 2016

To separate the CM and DM noise in the EMI generated in various electrical electronic systems, passive and active separators have been researched. These separators are an important part of an effective active EMI-filter. The passive separator has some advantages, in that it is easy to realize at a low price and its structure is very simple. However, its major drawback is that its accurate inductor realization and accurate core selection are very difficult. The active separator is smaller in size and more accurate, but its main drawback is that an op-amp which has a broad band frequency response is necessary, its cost is high, and a DC power circuit is required. This paper compares the characteristics of EMI filters which apply the existing passive separator and proposed active separator. It was concluded that an active separator is needed for expensive and accurate equipment, whereas a passive separator is sufficient for inexpensive and general purpose EMI filters.

• 전기의세계
• /
• v.27 no.1
• /
• pp.70-71
• /
• 1978

회로망이론 및 시스템의 관심분야는 이론과 실제 및 새로 출현하는 기술과 연관하는 분야이며 다음과 같이 구분할 수 있다. 1)회로와 시스템의 해석과 설계에 대한 새로운 개념과 접근방법이다. 회로와 시스템은 대형회로와 시스템 집적회로를 포함한 디지탈 아날로그 소리드스테이트회로 수동 및 능동필터, 집중 및 마이크로웨이브회로망, 비선형 및 시변회로와 시스템, 그라프이론과 응용, 아날로그와 디지탈 신호로세싱시스템, 다차충필터에 관한 것. 2)컴퓨터협조기술로서 여기에는 해석, 설계, 레이아웃, 회로와시스템의 시험과 제작, 그리고 신산법과 사용자 오리엔트된 언어가 포함된다. 3)신호프로세싱, 통신, 계장과 제어에 있어서 모델화, 해석, 응용을 포함하는 신장치와 회로 4)생물학적 경제학적 시스템의 회로개념과 기술의 응용 등이다.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1387-1388
• /
• 2005

본 논문에서는 입력부에 LC 수동소자와 PFC IC를 각각 사용했을 경우의 1kW급 직류 전원장치에서의 동작 특성을 비교하고 있다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.1
• /
• pp.26-34
• /
• 1999

According to increase of nonlinear power electronics equipment, active power filters have been researched and developed for many years to compensate harmonic disturbances and reactive power. However the commercial of active power filter is being proceeded slowly, because the cost of active power filter compared to the passive filter for harmonic and reactive power compensation is expensive. Especially, the use of DSP (Digital Signal Processing) chip, which is frequently used to control 3-phase active power filter, is a factor of increasing the cost of active power filters. On the other hand, the use of only analog controller makes the controller's circuits much more complicate and depreciates the flexibilities of controller. In this paper, a controller with low cost for 5[kVA] 3-phase active power filter system is designed. To reduce the expense of active filter system, the presented controller is composed of digital control part using Intel 80C196KC $\mu$P and analog control part using hysteresis controller for current control. Characteristic analysis of designed controller for active filter system is performed by computer simulation and compensating characteristics of the designed controller are verified by experiment.tegy can apply to the vector control, leading to better output torque capability in the ac motor drive system. This strategy is that in the overmodulation range, the d-axis output current is given a priority to regulate the flux well, instead the q-axis output curent is sacrificed. Therefore, the vector control even in the overmodulation PWM operation can be achieved well. For this purpose, the d-axis output voltage of a current controller to control the flux is conserved. the q-axis output voltage to control the torque is controlled to place the reference voltage vector on the hexagon boundary in case of the overmodulation. The validity of the proposed overall scheme is confirmed by simulation and experiments for a 22[kW] induction motor drive system.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.295-296
• /
• 2016

본 논문은 LCL 필터를 사용하는 계통연계형 인버터에 커패시터 전류 피드백 방식의 능동댐핑을 적용한 안정도 향상 방안를 분석하였다. 커패시터 전류 피드백 방식은 커패시터에 저항을 병렬 연결한 수동댐핑과 동일한 특성을 나타내며, 안정도 해석에 $1.5T_s$의 연산 및 PWM 시지연을 고려하였다. 주파수 응답 특성과 이산시간 영역에서 근궤적을 이용하여 안정도를 해석하며, 필터 공진을 저감시키기 위한 능동댐핑의 이득 $k_d$의 범위를 산정하였으며 PSIM 시뮬레이션과 5kW 계통연계형 실험을 통해 필터 공진에 대한 저감 효과를 검증하였다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.21 no.1
• /
• pp.43-50
• /
• 2016

In this paper, new automatic LC calibrator is proposed for realizing a passive LC filter with almost constant frequency characteristic regardless of the PVT variations. The SAW-less GPS RX front-end is implemented using a 65nm CMOS process using the proposed LC calibrator. Also, new dual-mode low noise amplifier (LNA) structure is proposed to generate the RF signal required for the LC calibrator. The characteristics of the implemented GPS RX front-end show the voltage gain of about 42.5 dB, noise figure of below 1.35 dB, the blocker input P1dB of -24 dBm in case of the worst blocker signal at 1710 MHz frequency, while it consumes 7 mA current at 1.2 V power supply voltage.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.3
• /
• pp.36-44
• /
• 2006

In general, the generated harmonics and noise of the PWM inverter are affected by PWM switching method, switching frequency, dv/dt and di/dt. Since multilevel inverters are often applied to the high power system, and operates with low switching frequency, theyproduce large size of harmonic contents and noise. Thus it is necessary to install output filters in the multilevel inverter. In this paper a filter design approach for the harmonic and noise reduction the three phase induction motor driving system using H-bridge 7-level inverter system is presented. The passive filter that has low cost and simple structure and can effectively reduce harmonics and noise, is designed and applied to the three phase induction motor drive having multilevel inverter system. The designed system is implemented and verified by simulation and experiments.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.5
• /
• pp.484-492
• /
• 2000

In this paper, a voltage compensator with harmonic current compensating capability is studied and its compensating characteristics are analyzed. Like the hybrid active power filter, the proposed system is composed of parallel LC passive filter and series PWM converter connected to power line through series transformer. It is shown that the compensation of harmonic current generated due to nonlinear loads such as diode rectifier and instantaneous voltage compensation of the source are performed through the proposed compensating system. The operating principle of the proposed system is described through a single-phase equivalent circuit and the control strategy is suggested on the d-q rotating reference frame of the 3-phase system. Also, experiment is carried out to verify compensating characteristics of the proposed system.