• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.6
• /
• pp.885-892
• /
• 2011

In this study, LCA(Life Cycle Assessment) on 'Saemangum CSO Project' was carried out to evaluate environmental impact which occurred during the construction and operation periods and the potential environmental impact reduction was analyzed by comparing production and reduction level of pollution loads. LCA was conducted out according to the procedure of ISO14040 which suggested Goal and Scope Definition, Life Cycle Inventory Analysis, Life Cycle Impact Assessment and Interpretation. In the Goal and Scope Definition, the functional unit was 1 m3 of CSO, the system boundary was construction and operation phases, and the operation period was 20 years. For the data collection and inventory analysis, input energies and materials from civil, architecture, mechanical and electric fields are collected from design sheet but the landscape architecture field is excepted. LCIA(Life Cycle Impact Assessment) was performed following the procedure of Eco-Labelling Type III under 6 categories which were resource depletion, eutrophication, global warming, ozone-layer destruction, and photochemical oxide formation. In the result of LCA, 83.4% of environmental impact occurred in the construction phase and 16.6% in the operation phase. Especially 78% of environmental impact occurred in civil works. The Global warming category showed the highest contribution level in the environmental impact categories. For the analysis on potential environmental impact reduction, the reduction and increased of environmental impact which occurred on construction and operation phases were compared. In the case of considering only the operation phase, the result of the comparison showed that 78% of environmental impact is reduced. On the other hand, when considering both the construction and operation phases, 50% of environmental impact is increase. Therefore, this study showed that eco-friendly material and construction method should be used for reduction of environmental impact during life cycle, and it is strongly necessary to develop technology and skills to reduce environmental impact such as renewable energies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5594-5600
• /
• 2013

The compensation for employee invention from the university can be taxed or non-taxed depending on the classification of the type of income. The government legislated the Promotion of Industrial Education and Industry-Academic Cooperation Act and the Technology Transfer and Commercialization Promotion Act in order to improve the research productivity of universities and industrial-academic collaboration via transferring the technologies. However, the confusion with taxation on the compensation of employee invention from the university has been incurred due to the difference of legal interpretation between government bureaus. In this research, bureaucratic conflict on the non-taxation scheme is examined in a legal aspect and the effect of non-taxation scheme is also studied in aspect to personal tax exemption. Finally, some suggestions are provided for the purpose of settlement of the non-taxation scheme in order to improve employee invention from the university.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.3
• /
• pp.191-200
• /
• 2020

This study is to improve the efficiency of BTL (Build Transfer Lease) project operation by comparing the infiltration rate based on the data of 5 years of infiltration of the separate sewer system and combined sewer system. In the survey site, the separate sewer system area consists of eight flowmeters in seven treatment basins, and the combined sewer system area consists of eight flowmeters in five treatment basins. The infillration rate was analyzed by night-time domestic flow evaluation method, and the average infiltration rates of the separate sewer system and combined sewer system were 13% and 16%, respectively. Combined sewer system was about 1.3 times higher than the separate sewer system. The average BOD of separate sewer system was 233 mg/L, which was about 2.4 times higher than the combined sewer system was 107 mg/L. In the comparison of the average pipe diameter-length infiltration of separate sewer system and combined sewer system, the separate sewer system and the combined sewer system were about 0.150 ㎥/d/mm/km and about 0.109 ㎥/d/mm/km, respectively. The floating population in mixed residential and commercial areas has been identified as the cause. Therefore, we propose a method to calculate the infiltration rate in consideration of the margin ratio in the area where the night active population is concentrated.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.285-290
• /
• 2001

There are some of the tools for measuring enterprise and group behavior on construction projects. Of these, performance is vital. But, because of imperfect factors, it came under attack. An enterprise can, however, improve it's problem with performance measurement. For this reason, it is essential tool for achieving objectives of an enterprise. Domestic construction industry must understand that what isn't measured, it not only can't manage it also can't improve. The objective of this study is to investigate the performance measurement tools and items in overseas construction projects(UK, Australia). Based on the data, the study suggests the considerable items, problems and restrictive factors as it is accepted on domestic construction industry.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.3
• /
• pp.395-406
• /
• 2015

This research carried out an analysis on input cost and leakage reduction effect by leakage reduction method, focusing on the project for establishing an optimal water pipe network management system in the Taebaek region, which has been executed annually since 2009. Based on the result, optimal cost-benefit analysis models for water distribution network rehabilitation project were developed using DEA(data envelopment analysis) and multiple regression analysis, which have been widely utilized for efficiency analysis in public and other projects. DEA and multiple regression analysis were carried out by applying 4 analytical methods involving different ratios and costs. The result showed that the models involving the analytical methods 2 and 4 were of low significance (which therefore were excluded), and only the models involving the analytical methods 1 and 3 were suitable. From the result it was judged that the leakage management method to be executed with the highest priority for the improvement of revenue water ratio was installation of pressure reduction valve, followed by replacement of water distribution pipe, replacement of water supply pipe, and then leakage detection and repair; and that the execution of leakage management methods in this order would be most economical. In addition, replacement of water meter was also shown to be necessary in case there were a large number of defective water meters.

• Journal of Korea Water Resources Association
• /
• v.42 no.3
• /
• pp.177-190
• /
• 2009

Rehabilitation projects for old water mains typically require considerable capital investments. One of the economical ways of pursuing the rehabilitation projects is to focus on a specific area within the entire region under management. In this paper the hierarchical clustering methods that analyze spatial inter-relationship of location data are applied to about 8,000 water leak location data recorded in a case study area from 1992 to 1997. Among the hierarchical clustering methods Single, Complete, and Average Linkage Methods are used to identify clusters of the water leak locations and to divide the area according to the defined clusters. By comparing the clusters identified by the clustering methods, the best clustering method for the case study area is suggested. Prioritization of the area for maintenance is obtained based on the water leak incident intensity for the clustered area using the suggested best clustering method.

• The Journal of the Korea Contents Association
• /
• v.21 no.9
• /
• pp.312-321
• /
• 2021

With the full implementation of open banking in which both banks and fintech companies participate, changes in the whole society such as new types of products, services, and businesses are taking place. Whenever new systems and environments change, research on technology acceptance by system users has been continued, and this study also verified how the characteristics of open banking affect the perceived ease of use and usefulness of the Technology Acceptance Model, and the intention to use open banking. As a result of the study, it was found that both information provision, service interactivity, and system stability had a significant effect on perceived ease of use, usefulness, and intention to use open banking. In the future, open banking may bring significant benefits to data sharing, financial access, banking infrastructure, product innovation and pricing, but it is also expected to bring unexpected damage. Therefore, domestic financial institutions should actively cope with the situation where the business environment is greatly changing due to the digital environment change, and at the same time actively foster fintech companies and promote innovation in the financial industry.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.1
• /
• pp.1-14
• /
• 2021

Eutrophication and algal blooms can lead to increase of taste and odor compounds and health problems by cyanobacterial toxins. To cope with these eco-social issues, Ministry of Environment in Korea has been reinforcing the effluent standards of wastewater treatment facilities. As a result, various advanced phosphorus removal processes have been adopted in each wastewater treatment plant nation-widely. However, a lot of existing advanced wastewater treatment processes have been facing the problems of expensive cost in operation and excessive sludge production caused by high dosage of coagulant. In this study, the sedimentation and dissolved air flotation (SeDAF) process integrated with sedimentation and flotation has been developed for enhanced phosphorus removal in wastewater treatment facilities. Design and operating parameters of the SeDAF process with the capacity of 100 ㎥/d were determined, and a demonstration plant has been installed and operated at I wastewater treatment facility (located in Gyeonggi-do) for the verification of field applicability. Several empirical evaluations for the SeDAF process were performed at demonstration-plant scale, and the results showed clearly that T-P and turbidity values of treated water were to satisfy the highest effluent standards below 0.2 mg/L and 2.0 NTU stably for all of operation cases.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.3
• /
• pp.205-225
• /
• 2021

Due to the large-scale production and use of synthetic chemicals in industralized countries, various chemicals are found in the aquatic environment, which are often termed as micropollutants. Effluents of municipal wastewater treatment plants (WWTPs) have been identified as one of the major sources of these micropollutants. In this article, the current status of occurrence and removal of micropollutants in WWTPs and their management policies and options in domestic and foregin countries were critically reviewed. A large number of pharmaceuticals, personal care products, and industrial chemicals are found in WWTPs' influent, and are only partially removed by current biological wastewater treatment processes. As a result, some micropollutants are present in WWTPs' effluents, which can negatively affect receiving water quality or drinking water source. To better understand and assess the potential risk of micropollutants, a systematic monitoring framework including advanced analytical tools such as high resolution mass spectrometry and bioanalytical methods is needed. Some Western European countries are taking proactive approach to controlling the micropollutants by upgrading WWTP with enahnced effluent treatment processes. While this enahnced WWTP effluent treatment appears to be a viable option for controlling micropollutant, its implementation requires careful consideration of the technical, economical, political, and cultural issues of all stakeholders.

• Journal of the Economic Geographical Society of Korea
• /
• v.25 no.3
• /
• pp.339-356
• /
• 2022

This study focuses on Hokkaido University Research & Business Park in Japan as an example of establishing a regional innovation ecosystem on campus based on the outstanding research and university-industry collaboration capabilities of local universities in non-metropolitan areas with weak foundations for start-ups and corporate growth. Hokkaido University Research & Business Park established a mid-to long-term plan using the idle sites on campus, and was developed through a gradual development process since 2003. The promotion of university-industry collaboration was pursued through an industrial-based approach of establishing a bio-industry cluster considering the characterization of local universities and the foundation of local industries. It also provides various corporate support services through cooperative governance between local industry, universities, research institutes and the government. This strategy for creating Hokkaido University Research & Business Park provides important policy implications for various policies and projects that promote regional development by utilizing university campuses like the campus innovation park project.