• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.341-349
• /
• 1996

To improve the dyeability of polyurethane (PU) resin, low molecular weight diols containing dye site in the molecular structure was added as a chain-extender. PU resin were synthesized with the variations in the chain extender, polyol type, and hard segment/soft segment (HS/SS) ratio. When HS/SS ratio is 1.4 and dimethylolpropionic acid(DMPA) or N-butyldiethanolamine (BDEA) was used as a chain extender, because of heterogeneity of reaction mechanical properties were diminished. But when N-methyldiethanolamine (MDEA) was used as a DCE, and HS/SS ratio lowed to 1.3, mechanical properties and dyeability improved. In particular, when linear type 1,4-BD was formulated with MDEA, hydrolysis resistance and mechanical properties of PTMG type PU was improved. And initial elasticity, tensile strength and elongation could be controlled by the variation of HS/SS ratio, DCE mixing ratio of 1,6-HD or NPG.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1235-1242
• /
• 2019

In this study, prepolymer was synthesized through the reaction of isoporon diisocyanate (IPDI) and dimethylolbutanoic acid (DMBA) based on poly (tetramethylene ether) glycol (PTMG) for the synthesis of water-soluble polyurethane to be used as a leather surface coating applied with ethyl acetate and piperazine. Thereafter, the piperazine was chain-extended with 0.01 M, 0.03 M, 0.05 M, and 0.07 M in the water-dispersed resin, and the tensile strength, elongation, CV (cyclic voltammetry), and solvent resistance analysis were performed. Tensile strength of the prepared sample was measured at 5.422 kg_f/㎟ when the piperazine content was 0.07M, and elongation was measured as 587% when the piperazine was 0.01M. Solvent resistance analysis showed the same solvent resistance regardless of piperazine content, and the redox potential was changed according to piperazine content through CV measurement.

• Applied Chemistry for Engineering
• /
• v.21 no.4
• /
• pp.377-384
• /
• 2010

We perform a comparative study to investigate the properties of the new energetic chain extender (AzPD). A series of poly(glycidyl azide)/poly(tetramethylene oxide)-based energetic segmented polyurethane (GAP/PTMG ESPU) with different chain extender, which is 3-azidopropane-1,2-diol (AzPD), 1,4-butane diol (1,4-BD), or 1,5 pentane diol (1,5-PD), was synthesized by solution polymerization in dimethyl formamide (DMF) and their phase behaviors were investigated. The ESPUs were characterized with Fourier transform infrared-attenuated total reflection spectroscopy (ATR FT-IR), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). The results of the ATR FT-IR analysis of the urethane carbonyl group region showed that the 'free' C=O fraction was higher in GAP/PTMG AzESPU (0.5) than GAP/PTMG BDESPU (0.44) and GAP/PTMG PDESPU (0.41) for 7 days samples after preparation and that it was similar in the range of 0.26~0.29 for three 60 days ESPU samples. DMA curves of the GAP/PTMG AzESPU for 7 days samples showed amorphous polymers, but GAP/PTMG BDESPU and GAP/PTMG PDESPU showed viscoelastic behaviors with rubbery plateau and the flow region. However, DMA curves of the GAP/PTMG AzESPU for 60 days samples showed viscoelastic behaviors with rubbery plateau and the flow region like GAP/PTMG PDESPU, but GAP/PTMG BDESPU did not show the flow region. From phase behaviors with ATR FT-IR, DSC and DMA analysis, GAP/PTMG AzESPU showed good phase-mixing between components. However, it represented viscoelastic behavior of TPE similar to GAP/PTMG PDESPM according to phase equilibrium progress with aging time.

• Elastomers and Composites
• /
• v.34 no.5
• /
• pp.399-406
• /
• 1999

Polyurethane (PU) prepolymers were synthesized from polytetramethylene ether glycol (PTMG), 4,4'-diphenylmethane diisocyanate (MDI), toluene 2,4-diisocyanate (TDI) and isophoron diisocyanate (IPDI). After chain extention using dimethyol propionic acid (DMPA), aqueous polyurethane anionomers were prepared from triethyl amine (TEA) as a neutralizer. The effect of the content of chain extender and the degree of neutralization on the state of emulsification, adhesive strength, viscosity, glass transition temperature and physical properties of emulsion cast film were investigated using UTM, Viscometer and DSC.

• Elastomers and Composites
• /
• v.33 no.3
• /
• pp.177-184
• /
• 1998

Polyurethane(PU) prepolymers were synthesized from polytetramethylene ether glycol(PTMG), with 4,4'-diphenylmethane diisocyanate(MDI), toluene 2,4-diisocyanate (TDI) and isophoron diisocyanate(IPDI). After chain extention using n-methyl-diethanol amine(n-MDEA), aqueous polyurethane cationomers were prepared by addition of glycolic acid(GA) as a quaternizer. The effect of the content of chain extender and the degree of neutralization on the stability of emulsion, adhesive strength, viscosity, glass transition temperature and physical properties of emulsion cast film were investigated using UTM, viscometer and DSC.

• Elastomers and Composites
• /
• v.48 no.3
• /
• pp.190-194
• /
• 2013

In this study, sebacic acid made from castor oil was used as monomer with isophthalic acid and glycols for polyester polyol synthesis. Polyurethane adhesive was synthesized from the various polyester polyol. From the result of adhesion strength test, polyester polyol made from sebacic acid showed better adhesive force than that of adipic acid due to higher cohesive energy. Branched glycol containing methyl group represented better adhesion than linear glycol. In the chain extender, adhesion strength increased going from PG, EG, BD. From the measurement of TGA, BD showed the best heat stability, and followed by PG, EG. Glass transition temperature increased in the order PG, EG, BD by the result of DMA.

• Elastomers and Composites
• /
• v.49 no.1
• /
• pp.31-36
• /
• 2014

Polyester polyols were synthesized by using each one mole of sebacic acid, isophthalic acid, ethylene glycol, and neopentyl glycol. The synthesized polyol had 56.6 mg KOH/g of hydroxy value and 1980 g/mole of molecular weight. From FT-IR structure analysis of polyester polyol, Hydroxy group(-OH) was observed around 3600 $cm^{-1}$, -CH shoulder of sebacic acid at 2950 $cm^{-1}$, carbony group of ester around 1730 $cm^{-1}$, and benzene ring of isophthalic ring was represented at 1600 $cm^{-1}$, 740 $cm^{-1}$. In case of polyurethane, hydroxy peak was showed at 3600 $cm^{-1}$, and -NH group around 3300 $cm^{-1}$, 1530 $cm^{-1}$. From $^1H$ NMR measurement of polyester polyol, it was found that sebacic acid was represented at 1.3, 1.5, 2.1 ppm, isophthalic acid at 7.3, 8.1, 8.7 ppm, ethylene glycol at 4.2 ppm, and neopentyl glycol at 0.8, 3.2, 3.9 ppm, respectively. In the polyurethane, it is almost the same as spectrum of polyester polyol, but showed very week peak at 7 ppm by benzene ring of toluene diisocyanate.

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.575-581
• /
• 1997

UDs were synthesized from two different polyols(PTMG, PBEAG), ionic chain extender(DMPA), EDA with $H_{12}-MDI$. PU/PMMA hybrids were prepared with free radical polymerization of MMA monomer in MMA-swelled PUD. PUD particle size and film properties were investigated ionic content and polyol type. Mechanical and thermal properties of PU/PMMA hybrid film were studied in terms of PU's ionic content and the venation of PU/PMMA compositions. As DMPA content increased from 2wt% to 10wt% in PUD, particle size of PUD decreased. PUD's particle size with ester type polyol was found to be smaller then ether type polyol used. Phase separation between hard segment(HS) and soft segment(SS) with ionic contents in PU was shown by the thermal, mechanical property measurement. Although the composition of MMA was changed from 0 to 40 wt% in PU/PMMA hybrid, the particle size of the hybrid did not increase. Using the ester type polyol, tensile strength of hybrid was found to increase by 2wt% - 6wt% DPMA content, but as higher content the strength of hybrid decreased. Moreover with the ether type polyol, tensile strength of hybrid was observed to increase by 2wt% - 4wt% DMPA content, while decreasing at higher content. PU and PMMA polymer molecule being mixed in molecular level was confirmed from the pattern of $T_g$ in DSC thermogram.