• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.501-502
• /
• 2008

특정 지역에 대한 공간 분석을 하기 위해서는 많은 요소들을 고려해야 한다. 예를 들어 시설물을 설치한다거나 경과지역 내에서의 공간 분석이 필요할 경우, 법적 제한 요건 및 지형적 특성에 따라 공간 분석 패턴들을 다양하게 생성할 수 있기 때문이다. 이에 올바른 분석 기법의 선정이나 정확한 자료들의 수집은 필수적이라 할 수 있겠다. 따라서 본 연구에서는 해당 지역 내에서의 경과지 선정 기준을 알아보고 그에 따른 저항치와 경중률을 계산하여 각각의 지형적 요소에 적용시켜 분석을 실시하였다. 그리고 분석 시에는 Corridor와 같은 GIS 공간분석기법을 이용하여 해당 지역 내의 송전 철탑 설치를 위한 최적 경과지와 최적 경로를 선정하였다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.20 no.7_spc
• /
• pp.435-441
• /
• 2016

The Korean peninsula has known as a minor-to-moderate seismic region. However, some recent studies had shown that the maximum possible earthquake magnitude in the region is approximately 6.3-6.5. Therefore, a seismic vulnerability assessment of the existing infrastructures considering ground motions in Korea is necessary. In this study, we developed seismic fragility curves for a continuous steel box girder bridge and two typical transmission towers, in which a set of seven artificial and natural ground motions recorded in South Korea is used. A finite element simulation framework, OpenSees, is utilized to perform nonlinear time history analyses of the bridge and a commercial software, SAP2000, is used to perform time history analyses of the transmission towers. The fragility curves based on Korean ground motions were then compared with the fragility curves generated using worldwide ground motions to evaluate the effect of the two ground motion groups on the seismic fragility curves of the structures. The results show that both non-isolated and base-isolated bridges are less vulnerable to the Korean ground motions than to worldwide earthquakes. Similarly to the bridge case, the transmission towers are safer during Korean motions than that under worldwide earthquakes in terms of fragility functions.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.719-720
• /
• 2007

Korea, for the first time in the world, constructed 765 kV double circuits transmission lines, which has 3 phases and 6 bundles with vertical arrangement using steel pipes in 1998. Also in 2002, we developed 765kV outdoor full GIS substation with self-developed technology. KEPCO accumulated a wealth of technologies for 765kV system construction and operation, and are listed 5th in technology field in the world. With this advanced technologies, we are developing oversea business. We started with a projects, 'Development Study on the Power System Network Analysis in Myanmar' in 2001, and continued the project to transmission design, consulting for transmission technology including the education of foreign trainees in south-east and middle east asia. Currently, 12 overseas businesses including 330kV transmission system consulting in Ghana, are in progress. In 2007, beginning with 750 kV transmission consulting in China, we are operating ATT(Advanced Transmission Technology) training program, which educate engineers of government and utilities company from China, Myanmar, Cambodia, Laos and Cambodia. However, for the successful development study on the power system, design of the power system and the training service, it is essential to standardize load design criteria in consideration of temperature, wind speed, air pressure and density, etc. of the other countries. Therefore, in this paper, standardized load design criteria for Cambodia, Laos, Myanmar is explained.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.466-467
• /
• 2008

In case of a line-to-ground fault at transmission lines, a portion of fault current will flow into the earth through the footings of the faulted tower causing electrical potential rise nearby the faulted tower footings. In this situation, any buried pipelines or structures nearby the faulted tower can be exposed to the electrical stress by earth potential rise. Although many research works has been conducted on this phenomena, there has been no clear answer of the required separation distance between tower footings and neary buried pipeline because of its dependancy on the soil electrical charactersics of the concerned area and the faulted system.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.5
• /
• pp.195-201
• /
• 2006

Tower footing resistance and fault current division factor are important design factors for evaluation of the lightning performance of the transmission line and/or design of the grounding electrode system. The periodic measurement of those factors are also important to verify that the grounding performance of the towers has been maintained good. However, the direct measurement of those factors in operating or energized condition is very difficult because of many practical reasons, such as the difficulty of disconnecting overhead groundwires from the tower under test. With supports by GECOL (General Electricitiy Company of Libya), we had a special chance to conduct Fall-Of-Potential (FOP) test on the energized 220 kV transmission towers before and after disconnecting the overhead groundwires from the towers under test. In this paper, the FOP test results on the towers and the fault current division factors estimated from the comparision of the FOP tests with and without overhead groundwires were presented. The computer models for the FOP test simulations were also constructed to find that the simulated results agreed very well with the measured ones.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.7
• /
• pp.560-565
• /
• 2010

This paper presents the design factor of an overhead transmission tower structure in order to reduce the tower weight. The behaviour of transmission tower structures are affected by the horizontal angle of the tower structure, the equivalent wind pressure group, the slope of the main post of the tower, the separation of the internode and the use of high-strength materials in their construction. Tower weight can be reduced by approximately 30% reduce weight by means of optimal design based on a consideration of all the above factors. In addition, the design of the foundation of the tower with the shear key installation to increase horizontal support together with a modified angle of inclination to the ground can reduce by about 37% the amount of concrete used during construction. The area of ground disturbed by the construction of the tower foundation can thus be reduced by approximately 33%. Therefore it is possible to build an environmently-friendly T/L tower with the mechanical properties of existing towers.

• Journal of Wetlands Research
• /
• v.6 no.1
• /
• pp.73-87
• /
• 2004

This study was carried out on Sihwa reclaimed area from January to December in 2003. We observed total 169,351 individuals of 70 species(22 species of waders, 9 species of egrets and 5 species of gulls). Waterbird population was the largest in March(95,465 individuals) and was the smallest from April to June(less than 7,000 individuals). The most dominant species was Pintail(Anas acuta: 58,627 individuals, 34.6%) and other species were Mallards(Anas platyrhynchos: 24.5%), Common Pochards(Aythya ferina: 13.8%), Black-tailed Gulls(Larus crassirostris: 6.1%), Spotbill Ducks(Anas poecilorhyncha: 5.0%) and Greater Scaups(Aythya marila: 2.69%). Sihwa reclaimed area supported many kinds of protected species such as Chinese egrets(Egretta eulophotes), Black-faced Spoonbills(Platalea minor), Eurasian Spoonbills(Platalea leucorodia), Mute Swans(Cygnus olor), Whooper Swans(Cygnus cygnus), and Eurasian Oystercatchers(Haematopus ostralegus). They foraged at waterside of Sihwa lake and rested at reclaimed area. Particularly, Eurasian Oystercatchers bred in habitats with Salicornia herbacea and Suaeda japonica. Reclamation of mud flats and construction of roads, transmission towers and tide embankments disturbed waterbirds in breeding and foraging. We suggest that waterbirds are protected in different action plans according to their status such as breeding, passaging and wintering birds. Maintaining of waterside and swamps in Sihwa reclaimed area will be useful for breeding waterbirds. It is needed to make a protect zone for ecological connecting belt from Oeji isarea, Hyeong isarea, Eum isarea to upper channel on Sihwa lake.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.52-67
• /
• 2011

The research investigates the identification of necessary geographic information needed by forest fire suppression helicopter pilots, and the ways to acquire the required information from public institutions. Firefighting helicopter pilots demand 7 physical geographic and 13 human geographic data. Applying the geographical information acquired from Korean public institutions, the following 15 characteristics (3 physical geographic, 12 human geographic) can be found: altitude and highlands, river, high population and urban areas, roads, national park and state boundaries, fuel re-supply facilities, freshwater areas, cultural assets, (LPG)gas charging stations, gas stations, ammunition storage areas, ground power cables, and steel towers. Within the database of physical geography, there is a need for improvement on bird habitat details. Also, the availability of visibility, wind directions, and wind velocity data is limited and therefore requires refining. The location of refueling areas can be obtained by applying information received from institutions to the GIS spatial analysis.