• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.321-326
• /
• 2018

This study describes the design and implementation of TRM(Transmit and Receiver Module) for detection for targets of small RCS(Radar Cross Section). Through the pre-simulation analysis of radar system about RF, the main specifications of TRM are verified. After the fabrication of TRM, the main characteristics such as the maximum output, noise figure, spurious were confirmed. In the future, the radar system test will be carried out by assembling TRMs, antenna radiator, and the transceiver that generates and receivers the radar waveform reflected.

• Journal of Digital Contents Society
• /
• v.17 no.3
• /
• pp.173-180
• /
• 2016

In this paper, a design of transceiver module for real-time wire and wireless robust integrated security system to solve the problem of conventional security system and its transceiver module is proposed. The presented robust integrated security system is designed with RF control unit and wireless transceiver module. A RF controller in transceiver module works as a low-power RF transceiver system. It is designed to use specific bandwidth stored in registers and manipulate RF power of transceiver by accessing the random values of registers. Operation algorithm for RF transceiver module is also presented. The designed transceiver module and the operation algorithm are implemented and verified by experiments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2417-2424
• /
• 2016

Small size and light weight is very important for components used in radar mounted platform such as airborne radar. Recently, the active phased array radar is developed as an array of antennas for thousands of transmit/receive modules to be used as a multi-function radar that can detect and track targets. In this case, the size and weight of the transmit/receive modules are critical factor for developing the radar. In this paper, we developed a compact transmit/receive module using the 10W RF MEMS switch domestically localizing and reduced the circuit area to about 86.5% compared to using a circulator. The developed module satisfies not only electrical requirements but also MIL-STD's environmental specifications. So it can be used in a military device. It can be used at adaptive tunable receivers, reconfigurable smart active antennas and wide band beam electrical steering antennas.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.233-237
• /
• 2017

The dual-channel receiver MMIC which is composed of LNA, Mixer, LO-amp and temperature compensation circuit is designed on a single chip. For the performance comparison, a FMCW radar transceiver module using commercial MMICs is also implemented. As a result, Multi-channel Transceiver using manufactured MMIC shows an improved performance such as noise figure and gain flatness compare to purchased MMIC.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.267-272
• /
• 2006

In this paper, an integrated and small Ka-band transceiver module has been developed for measuring distance at the radar systems. Oscillator of cavity type, The MMIC such as VCO, power amplifier, LNA, and mixer, and passive components are integrated on carriers and these are assembled in the transceiver module directly. The test result shows the output power of 21dBm and the noise figure of 5dB using developed transceiver module. Using developed FMCW transceiver module. We can measure the 60m range target by detecting the beat frequency and distinguish both earth and sky using radiometer signal. So we defined that the integrated module using MMIC had a good performance for the radar and radiometer at Ka-band.

• Information and Communications Magazine
• /
• v.24 no.8
• /
• pp.53-58
• /
• 2007

본고에서는FTTH의 최근 기술현황과 장비에 사용되는 GE-PON ONU와 OLT 광(光)송수신모듈의 기술에 대하여 알아본다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.63-70
• /
• 2020

In this paper, the transmit-receive module for military seekers has been designed and fabricated in 35 GHz. To increase the performance of substrates and high integration of circuits in millimeter-wave band, a 4-layer LCP(Liquid Crystal Polymer) substrate was developed. This substrate was implemented with three FCCL substrates and two adhesive layers, and a process using the difference in melting point between the substrates was used for lamination. Using a strip line and a microstrip line was confirmed by the transmission loss along the length of the substrate, and the performance of LCP substrates was validated with a power divider in 35 GHz. After confirming the performance of individual blocks such as power amplifier and low noise amplifier, a single channel Ka-band transmission/reception module was developed using a 4-layer liquid crystal polymer substrate. The transmit power of this module has above 1.1W in pulse duty 10% and has an output power of 1.1W and it has receive noise figure less than 8.5 dB and receive gain more than 17.6 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.940-945
• /
• 2008

In this paper, we have designed the Brick Transmit/Receive Module for K-band which can be applied to active phase array radar system. The proposed structure of T/R Module for K band is brick type for MCM(Multi Chip Module) form and the satisfaction of tile type T/R Module can apply to structure of cavity and main characteristic. The fabricated brick type T/R Module confirmed the main characteristic for electrical goal performance in test and this structure can be applied to active phase array radar.

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.346-348
• /
• 2003

본 논문에서는 플라스틱 광섬유용(POF) 광커넥터와 광송수신모듈을 설계. 제작하여 특성을 평가하였다. 650nm와 850nm POF 광커넥터는 광학적, 기계적, 환경적 신뢰성 시험을 통해 안정성을 확증할 수 있었다. POF 광송수신모듈은 1.25Gbps와 155Mbps급의 SC, RJ-45 형태의 구조로 제작되었고, 이를 적용하여 S/W Hub 및 광전 Outlet, Media Converter등을 구현하였다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.53-56
• /
• 2000

본 논문에서는 ISM 대역에서 동작하는 상용화된 RF 모듈을 사용하여 근거리 통신용 송수신 시스템을 구현하고 그 특성을 측정하였다. 기저 대역 데이터를 발생시켜 RF 모듈에 연결하여 전송하고, 수신측에서는 RF 모듈에서 복조된 데이터를 오실로스코우프를 사용하여 확인하였다. 본 실험에서 사용한 RF 모듈은 424MHz부터 429MHz까지의 영역에서 동작하며, FM 방식을 사용한다. 본 대학의 산학협동관 건물내에서 측정한 결과 거리에 따른 신호 감쇠와 신호 수신 감도를 파악할 수 있었으며, 이를 이용하여 건물 내에서의 근거리 통신에 적용할 수 있음을 확인하였다.