• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.544-549
• /
• 2007

Carrier-to-noise and interference ratio (CNIR) measurement is important in providing accurate channel quality measurements for orthogonal frequency division multiplexing (OFDM) systems in different bit loading environments. Interference and noise power estimation for CNIR measurement nay be carried out either with known data or without any prior knowledge about the transmitted data. With prior knowledge on transmitted data, better estimation can be achieved. However, this results in huge increase in system load. As for estimation methods without any prior knowledge, poor system performance results under certain circumstances. In this paper, we investigate the effect due to different interference and noise power on decision-directed (DD) CNIR estimation for OFDM systems and propose a new CNIR estimation scheme that provides optimal trade off between the performance and system load.

• The Journal of Information Technology
• /
• v.7 no.1
• /
• pp.43-56
• /
• 2004

The purpose of this paper is to study the send and receive of the message in the TEDI System. The TEDI System replaces a series of trade documents with electronic date, and it realizes secure and reliable transactions of data among parties by means of open networks, such as the Internet. The TEDI system is composed of Web browsers, TC Serves, a RSP Server, and Certification Servers. TEDI has development the system and legal frame work. Exporters, importers, carriers, banks insurance and companies those who engage in the trade releated business have tested TEDI system and evaluated the legal frame work from the practical point of view. TEDI is now refining the system and preparing for the service. A fundamental feature of the TEDI System is the attribution to participants of data messages through public key certificates issued by certification authorities that allow for verification of digital signatures. Access to servers maintained by such certification authorities also takes place through the internet. In principle, certificates used by any reputable certification authority may be employed as long as they are compatible with X.509 V3.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.5
• /
• pp.122-130
• /
• 2008

Improving the transmission rates of multi-media delivery, such as moving pictures and internet services, has become increasingly important in modern society. To satisfy such high data rate requirements, the MIMO technique, which has the capacity to transmit large amounts of data using limited frequency resources, was developed. The Space Division Multiplexing (SDM) system is one of the MIMO techniques to be able to improve the transmission capacity. However, it is unable to achieve diversity gain because of interference due to the use of multiple antennas. In this paper, an SDM system that utilizes a Multi-Block method as an advanced transmission technique in a wireless communication system to obtain diversity gain is proposed and discussed fur the performance of the proposed system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.11
• /
• pp.1428-1433
• /
• 2019

Interest in mountain accidents among the technical trends of disasters in Korea is increasing continuously. When accidents occur, the most common methods are location tracking and accident reporting using smartphones, and rescue activities are being carried out by using them. In this paper, we proposed an improvement of wireless safety system for mountain climbing safety using 447 FSK. Using the 447 MHz band transmitter / receiver, it accumulates position coordinates and data through position transmission and rescue signal transmission in case of anomalies. If a sender is out of the threshold of the set area range, a danger warning notification can be generated to quickly exit the danger zone. Provide services. In addition, it is considered that the health condition of the sender is continuously checked and the receiver is warned when the specified threshold is exceeded, so that it is possible to respond to the sender's disaster.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.6
• /
• pp.65-76
• /
• 2007

The P2P file sharing system sends the results to users by searching the files in the shared folders. In the process of it, the problem is that the transferred information includes the pathname and file information and it can be revealed who searches which files. In related to this problem, anonymous file sharing P2P protocol has been an active research area where a number of works have been produced. However, the previous studies still have a few of weakness. Therefore, We propose two anonymous P2P file sharing protocols based on the decentralized and unstructured Random Walk. The first scheme uses the dynamic onion routing where the requester can receive the wanted file without knowing other peers' IDs. The second scheme uses the IP multicast method which lowers the computational overhead. Both of them are more suited for the dynamic P2P system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.9-18
• /
• 2021

The 5G communication system employs the millimeter wave with the extremely high frequency. Since the high frequency signal has the strong straightness, the beamforming technology based on the multiple base stations is required for services covering wide range. The beamformer needs the angle-of-arrival(AOA) information of the signal incident to the antenna, and it is generally estimated through the high resolution AOA estimation algorithm such as Multiple Signal Classification (MUSIC) or Estimation of Signal Parameters via Rotational Invariacne Technique (ESPRIT). Although various antenna array shapes can be employed for the beamformer, a single shape (square, circle, or hexagonal) is typically utilized. In this paper, we introduce a transmitting/receiving beamforming system based on the combined array antenna with square and circular shapes, which is proper to various frequency signals, and evaluate its performance. For evaluating the performance of the proposed beamforming system based on the combined array antenna, we implement the computer simulation employing various scenarios.

• Journal of Navigation and Port Research
• /
• v.46 no.6
• /
• pp.576-584
• /
• 2022

AIS is widely utilized in vessel traffic services for marine traffic safety. In 2021, Korea deployed the high-speed maritime wireless communication system (LTE-Maritime) on the sea following IMO's proposal for the introduction of e-Navigation. In this paper, vessel trajectory data from AIS and LTE-Maritime were used for vessel trajectory prediction to compare and analyze the two systems. The results show that the trajectory prediction error of LTE-Maritime was smaller than that of AIS due to the granular and uniform data provided by LTE-Maritime. Additionally, it was revealed that time interval is the most important factor influencing the errors in trajectory prediction, with the prediction error of LTE-Maritime growing at a slower rate of 17% than AIS. This research contributes to the literature by quantitatively comparing AIS and LTE-Maritime systems for the first time.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.2
• /
• pp.37-44
• /
• 2009

In this paper, we propose an efficient method which improves the performance of transmission of PGA which is essential data for real-time earthquake monitoring system. Currently, above 120 earthquake stations were installed nationwide and additional installation is expected because the social interesting of earthquake hazard is rising. Real-time earthquake monitoring system checks earthquake occurrence by using PGA were calculated from acceleration data of each seismic station. An efficient method of PGA data transmission is key factor of real-time monitoring. The key idea of proposed method is to deal with each seismic station using an unique ID, to assign one bit to indicate whether a packet include a station's data or not. Proposed method can contain more station data and decrease the data loss compared to current method. To verify proposed method, we investigate the turnaround time and ratio of data loss using above 91000 packets. As results of experiment. the proposed method is proven that the method need more time about 50% but reduce the data loss about 87% as compared to previous method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.872-882
• /
• 1994

In this paper, the Low Noise Amplifier(LNA) is designed and fabricated to include a band pass filter characteristics considering the antenna system characteristics according to the transmitting and receiving signal level of communication satellite transponder. As an example, a 2-stage low noise amplifier and a 4-stage amplifier and designed, fabricated and measured at 14,0~14.5GHz of receiving frequency band. This fabricated LNA has shown the gain with very good flatness within pass-band, and its gain decreases rapidly out of band resulting in supperssion of the transmitting signal power leakage. It has shown the 20.3dB +- 0.1dB of pass-band gain, the 1.44dB +-0.04dB of noise figure and the 14dB rejection out of band(12.25~12.75GHz). The gain flatness, noise figure and group delay of this 2-stage LNA satisfactorily met the simulation results. And the fabricated 4-stage amplifier has shown the more than 42dB of pass-band gain, the +-0.25dB of flatness and the 28dB of the rejection effect for transmitting power leakage. The 2-stage LNA and 4-stage amplifier, in this paper, will bring a design margin for the input filter and also result in the system cost reduction.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2000.05a
• /
• pp.101-106
• /
• 2000

자동화 기기 분야에서 컴퓨터의 적용 및 응용은 하드웨어 발달에 따라 매우 빠르고 민감하게 반영되어왔다. 이는 컴퓨터 하드웨어의 빠른 개발 주기에 맞춰 저 가격, 고 효율성, 높은 신뢰성, 호환성 등의 장점을 가진 PC가 현대의 컴퓨터 흐름을 주도하게 되면서 자동화 산업분야 또한 이를 적용하여 왔기 때문이다. 이에 따라, 자동화 기기 분야에서는 고 가격, 긴 개발기간 등을 필요로 했던 과거와 달리 저 가격, 짧은 개발기간, 다양한 개발환경 등을 이룰 수 있었다. 또한, 생산량 증가에만 의존하던 과거와 달리 현대에 이르러서는 시스템의 최적화, 효율의 극대화, 시스템의 안정성, 운용의 편리성, 호환성 등의 개념들이 도입되고 있는 것이다. 자동화 기기를 구성하는 요인으로는 크게 시스템의 틀을 이루는 기계부분과 이를 제어하는 제어 시스템부로 나뉠 수 있다. 제어 시스템에서는 기계부분의 동작을 제어하는 동작 제어부와 이에 관한 정보를 화면에 나타내는 GUI(Graphical User Interface)부분으로 나뉘게된다. 현재에는 이를 통합하여 하나의 하드웨어에서 제어부와 GUI를 모두 담당하는 방법이 연구 진행되고 있으나, 하드웨어를 둘로 나누거나 하나로 하여도 제어부와 GUI 사이의 통신부분은 빼놓을 수 없는 요소가 된다. 따라서, 본 논문에서는 시스템의 안정성을 위하여 두 시스템간에 송·수신되는 데이터를 추적할 수 있도록 하는 Emulate 기법을 구현 및 개발하고자 한다. 이는, 두 시스템간의 통신 데이터를 실시간으로 누적, 저장하여 사용자로 하여금 시스템의 운용상태를 분석할 수 있게 하였으며, 시스템 오류발생 시 Emulate 자료를 근거로 시스템의 운용상태를 파악할 수 있게 하였다.근 제한기능을 제공하며 각 클라이언트와 서버간의 실시간 연결 혹은 지연연결을 지원하는 독립적인 애플리케이션이다. 이러한 처방전달 메시징시스템을 구성하는 각 요소에 대해 정의하고 개념적 모델을 설계하고자 한다.에게 청구되며, 소비자에게 전송 되는 청구서는 사용자DB를 참조하여 사용자가 미리 정의한 원하는 형태로 변환되어 전달되며, 필요시 암호화 과정을 거치는 것이 가능해야 한다. 전송된 청구서는 전자우편의 경우, 암호해독이 가능한 전용 브라우저를 통해 열람 되며, 이는 다시 전용 브라우저를 통해 지불인증이 승인되어 청구 제시서버에게 전송된다. EBPP 시스템의 제어 흐름은 크게 기업이 청구 정보를 소비자에게 제시하는 흐름과 소비자의 지불 승인으로 인해 기업이 은행에 지불을 요구하는 흐름으로 구분할 수 있다. 본 논문에서는 통합 청구서버 및 정구 제시서버의 역할 및 구성 요소들에 대해 서술하고, EBPP 시스템과 연동하여야 하는 메일 서버와의 상호 작용에 대해 서술할 것이다. 본 시스템을 아직 구현이 되지 않은 관계로 시스템의 성능 등의 수치적 결과를 제시할 수 없는 상태다., 취약계층을 위한 일차의료, 의약관리), ${\circled}2$ 보건소 조직 개편 및 민간의료기관과 협력체계 확립, ${\circled}3$ 전문인력 확보 및 인력구성 조정, 그리고 ${\circled}4$ 방문보건사업의 강화 등이다., 대사(代謝)와 관계(關係)있음을 시사(示唆)해 주고 있다.ble nutrient (TDN) was highest in booting stage (59.7%); however no significant difference was foun