• Current Research on Agriculture and Life Sciences
• /
• v.31 no.1
• /
• pp.38-44
• /
• 2013

To estimate the radiative heat loss from greenhouses, a new equation for calculating the sky temperature is presented. The sky temperature in the Daegu region was measured using a pyrgeometer and calculated using different equations according to the cloudiness. The calculated and measured results were then compared to identify the best equation for calculating the sky temperature. The difference value between the air and sky temperature was dissimilar and increased as the cloud amount decreased. On clear days the difference value was 10~20 times greater than that on cloudy and rainy days. When analyzing the correlationship between the calculated and measured sky temperatures on clear days, Bliss's and Clark & Allen's equations were found to be superior to the other equations. However, on cloudy days, the best correlationship between the calculated and measured sky temperatures was exhibited by Fuentes's equation. Therefore, a new equation is proposed for calculating the sky temperature on a cloudy day.

• Explosives and Blasting
• /
• v.31 no.1
• /
• pp.11-22
• /
• 2013

This study compared and analysed ground vibration, size of underwater background noise in fish farms and underwater object noise of blasting and obtained ground vibration prediction equation through a regression analysis and correlation equation between underwater object noises in order to predict degrees of underwater noise in blasting and organize underwater noise control regulations. Before the study, when background noise of fish and shellfish farms with different conditions was measured, levels of background noise were different according to environmental characteristics of each farm. Ground vibration which causes underwater noise was measured to obtain a correlation equation between ground vibration and underwater object noise. Therefore, if underwater noise is predicted for each construction with a use of a correlation and permissible standards appropriate for each condition are applied for design and construction, financial loss from damages to fish and shellfish caused by development of insufficient technological and engineering logic can be prevented and successful construction with safety of underwater creatures guaranteed can be achieved.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11a
• /
• pp.759-762
• /
• 2002

생체 특징에 기초한 개인적인 및 인증 방법의 하나인 홍채의 패턴 인식에 있어서 전처리 기술은 사용자의 홍채 정보 손실로 인한 오인식을 최소로 하여야한다. 본 논문에서 전처리 기술 중 프리위트(Prewitt) 필터와 sobel 필터를 이용한 홍채의 인식률을 비교하고 전처리된 영상으로부터 추출된 특징값에 대해 저용량을 유지하면서 손실된 정보가 없고 실시간 처리가 요구되는 정보 보호를 위한 특징추출 방법 중 고차 국소 자동상관함수를 이용한 특징추출 방법을 제시하여 인식률을 향상시키는 방법을 제시하고자 한다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.3
• /
• pp.231-239
• /
• 2002

Experiments on the single phase cooling heat transfer and pressure drop with microfin tubes were performed using water as a test fluid. Experimental data were obtained in the range of Reynolds number 3000 ~40000 and Prandtl number 4-6. The data of microfin tubes presented the characteristics of rough surface tube in pressure drop and heat transfer Experimental data were compared with the heat transfer and friction factor correlations of smooth tubes. Heat transfer enhancements of microfin tubes were lower than pressure drop penalty factors. The helix angle is more significant parameter in both of the pressure drop and heat transfer than the relative roughness. The correlations of Nusselt number and friction factor were suggested for the tested microfin tubes. Maximum deviations between correlations and experimental data were within $\pm15$% for Nusselt number and $\pm10$% for friction factor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1583-1591
• /
• 1998

In this paper, we consider the quasi maximum likelihood(quasi-ML) detector which uses antenna arrays in asynchronous time-varing channels. It is shown that the proposed quasi-ml detector can be regarded as a beamformer followed by a decorrelator: a method based on the eigendecomposition of the correlation matrix of the inverse-filtered signal is proposed to estimate the channel vectors. We also show that the proposed algorithm estimates the channel vector within small mismatch loss in severe propagation environment through computer simulations.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.496-496
• /
• 2023

상수도관의 노후화 등으로 발생하는 누수는 안정적인 급수운영을 저해하고 경제적 손실을 발생시킬 뿐만 아니라 지반 침하 등 2차 피해가 발생할 수 있다. 상수도관 누수는 배관 내·외부 부식으로 발생하는 핀홀(Pin Hole)로 인한 관통누수, 강관 용접 시 발생하는 시공불량, 볼트 및 고무패킹 등 부자재의 노후화, 굴착 등 작업에서 발생하는 물리적 충격 등 여러 원인으로 발생할 수 있다. 상수도관에서 누수가 발생할 경우, 관 내부수가 관 밖으로 유출되어 발생하는 파열음, 유출수와 지반과의 마찰로 인한 진동 및 소음 등이 발생할 수 있다. 청음식, 상관식 누수탐사와 같은 기존 누수탐사 방식은 전문가의 경험에 대한 의존도가 매우 높으며, 기존 장비의 특성상 비금속관 및 대구경관 등 특정 환경에서는 적용이 어려우며, 효율적인 탐사가 쉽지 않은 실정이다. 이에 대한 해결책으로 본 논문에서는 상수도 누수가 의심되는 구간을 대상으로 실시간 누수음 데이터 수집 및 인공지능(Artificial Intelligence) 분석을 실시하여 기존 조사방법보다 효율적이고 신뢰성 있는 누수탐사를 수행한 사례를 분석하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.942-942
• /
• 2012

강우-유출에 대한 수문해석에 있어 유효강우량 산정방법으로는 여러 가지가 있으나 국내외로 미농무부(United States Department of Agriculture)에서 제안한 NRCS-CN 방법이 널리 사용되고 있다. SCS-CN 방법은 1개의 매개변수만을 사용하여 방법이 간략하고 유역 토양특성의 반영이 가능하다는 장점이 있으나 공간적 규모에 따른 효과반영이 불가하고 초기손실우량비를 0.2로 고정하는 가정의 문제점 등이 있다. 많은 연구자들이 SCS-CN 방법의 문제점을 보완하고자 다양한 방법을 제시하였으며 특히 Michel 등(2005)은 토양수분계산가정(Soil Moisture Accounting Procedure)에서 유출기준저류고를 새로운 매개변수로 제안하여 초기손실우량비 가정의 불합리성을 개선하고 새로운 AMC 조건식을 산정하였다. 그러나 범용적인 AMC 조건식을 제안하고자 140개 유역에 적용한 결과를 통해 유출기준저류고는 토양의 최대잠재보유수량의 1/3으로 일괄 적용하는 문제점이 있으며, 민감도분석을 통해 전체 결과의 효율이 좋은 값으로 선정하였다. 이에 본 연구에서는 일 단위 집중형 장기유출모형인 GR4J(Ge'nie Rural a' 4 parame'tres Journalier)를 Michel이 제안한 모형을 적용하기 위해 선정하였으며 토양수분계산과정에서 새로운 매개변수인 유출기준저류고를 최적화기법인 화음탐색법을 적용하여 결정하였다. 적용대상은 국내의 달방댐, 횡성댐, 섬진강댐, 청주댐, 대청댐유역에 적용하였으며 본 연구에서 제안한 방법이 강우-유출 결과의 정확성을 향상시키는 것을 볼 수 있었다. 최종적으로 최적화된 유출기준저류고와 유역크기와의 상관성분석을 통하여 관계식을 도출하였다. 토양수분과정에 대한 고려는 유출량을 산정하는 데 있어서 정확성을 높이는 데 기여할 수 있으며 더불어 본 연구에서 제안한 관계식을 통하여 유출기준저류고와 유역특성과의 연관성을 확인할 수 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4364-4374
• /
• 2015

In this study, heat transfer and friction characteristics of compound enhanced fin-and-tube heat exchangers were experimentally investigated. Louver-finned heat exchangers were also tested for comparison purpose. The effect of fin pitch on j and f factor was negligible. The j factor decreased as number of tube row increased. However, f factor was independent of number of tube row. Louver fin samples yielded higher j and f factors than compound enhanced fin samples. For one row, j and f factors of louver fin were 23% and 27% higher than those of compound enhanced fin. For two row, those were 11% and 8%, and for three row, those were 10% and 9%. However, heat transfer capacities at the same pressure drop of the compound enhanced fins were 6.4% for one row, 11.1% for two row and 13.6% for three row larger than those of louver fins, Existing louver fin correlation overpredicted the present j factors and underpredicted the present f factors.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.12
• /
• pp.1111-1119
• /
• 2010

In this study, condensation heat transfer coefficients of R-410A were obtained in flattened tubes made from round tubes with an inner diameter of 5.0 mm. The saturation temperature was $45^{\circ}C$; the heat flux, 10 kW/$m^2K$; the mass flux, 100-400 kg/$m^2s$; and the quality, 0.2-0.8. The results showed that the effect of the aspect ratio on the condensation heat transfer coefficient depended on the flow pattern. For annular flow, the heat transfer coefficient increased as the aspect ratio increased. For stratified flow, however, the reverse was true: the pressure drop increased as the aspect ratio increased. Existing correlations adequately predicted the heat transfer coefficients and pressure drops of the flattened tubes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.5778-5788
• /
• 2015

In this study, wet surface heat transfer and friction characteristics of compound enhanced fin-and-tube heat exchangers were experimentally investigated. Louver-finned heat exchangers were also tested for comparison purpose. The effect of fin pitch on j and f factor was negligible. Both j and f factor decreased as number of tube row increased. Compound enhanced fin samples yielded higher j and f factors than louver fin samples. For one row, j and f factors of compound enhanced fin samples were 11% and 43% higher than those of louver fin samples. For two row, those were 8% and 50%, and for three row, those were 17% and 53%. Heat transfer capacities at the same pressure drop of the compound enhanced fin samples were 2.0% for one row, 3.1% for two row and 8.4% for three row larger than those of louver fin samples, Data were compared with predictions of existing louver fin correlations.