• Title/Summary/Keyword: 손실요인

Search Result 639, Processing Time 0.036 seconds

The effect of Nutrient Intake and Past Dairy Products Consumption on Bone Mineral Density of Postmenopausal of Korean Women (과거의 우유 및 유제품의 섭취가 한국노인의 골밀도에 미치는 영향)

  • 강은주
    • The Korean Journal of Food And Nutrition
    • /
    • v.11 no.1
    • /
    • pp.87-98
    • /
    • 1998
  • This study was conducted to investigate Osteoporosis on the effect of dietary factors and past young age period's dairy products consumption on BMD in 170 postmenopausal Korean women without diagnosed disease. Bone mineral density(BMD) of lumbar spine was investigated by dual energy X-ray absorptiometry. Dietary assesment of the subjects were measured by Cognitive Food Frequency Recall method. The measurements of group average were 57.9kg of body weight, 36.73 of BMI(Body Mass Index), 2103.3㎉ of energy, 638.7mg of dietary calcium, 70.3g of protein, and 10.58mg of iron. Nutrient intake levels were similar to or more than the level of Korean Recommended Dietary Allowances. Bone Mineral Density(BMD) of Lumbar spine(L2-L4) of group average was 0.912g/$\textrm{cm}^2$, and under 50 yr's 1,02g/$\textrm{cm}^2$, 50~54 yr's 0.92g/$\textrm{cm}^2$, 55~59 yr's 0.85g/$\textrm{cm}^2$, over 60 yr's 0.85g/$\textrm{cm}^2$, had been getting low degree on aging. BMD of the Lumbar spine was positively correlated with calorie, body weight, dietary calcium, protein, phosphorus and serum albumin. Past dairy products consumption experiment was highly significant on BMD in teenage period(R square = 26, p-value 0.0031). Particularly in over 60 yr group, the correlations between BMD and past dairy products consumption in teenage period had shown highly significance(r=0.48, p<0.02). 55~59 yr age group had also positive correlation(R squae = 0.29, p<0.05). This results confirm that the most effective way of preventing osteoporosis and the fractures is to maximize peak bone mass in early life and to minimize bone loss through the balanced intake of Ca and other nutrients and regular physical activity.

  • PDF

Growth Efficiency, Carcass Quality Characteristics and Profitability of Finishing Pigs Slaughtered at 130 vs. 110Kg (110kg 대비 130kg에 도축된 비육돈의 성장효율, 도체 품질 특성 및 수익성)

  • 이철영;권오천;하덕민;신호원;이제룡;하영주;이진희;하승호;김원기;김광위;김두환
    • Journal of Animal Science and Technology
    • /
    • v.48 no.4
    • /
    • pp.493-502
    • /
    • 2006
  • The slaughter weight (wt) is a most important economic factor in swine roduction. The present study was undertaken to determine if it is feasible to increase the slaughter wt of finishing pigs to 130kg without significantly affecting the growth efficiency and carcass quality. One hundred and sixty gilts and 160 barrows born from lean-type Yorkshire×Landrace (YL)-dam and Duroc (D)-sire lines, which are most widely used for terminal breeding for pork production in Gyeongsangnam-do, were randomly allocated into 16 pens under a 2 (sex)×2 (slaughter wt; 110 vs. 130kg) factorial arrangement of treatments. The animals were fed ad libitum a diet containing 3,200kcal DE/kg and 15.5% crude protein. After slaughter at the predetermined wt, yields of trimmed primal cuts and physicochemical characteristics of the longissimus dorsi muscle (LD) were measured or analyzed. Average daily gain was greater (P<0.01) in barrows than in gilts (0.86 vs. 0.79kg), but it was not different between the 110- and 130-kg slaughter wt groups (P>0.05). Backfat thickness was greater in the 130- vs. 110-kg group in both sexes (gilts: 21.6 vs. 17.6 mm, barrows: 25.1 vs. 20.8 mm). The yield percentage of belly was greater in barrows than in gilts (21.2 vs. 20.5%) and also in the 130-kg vs. 110-kg group (21.4 vs. 20.2%). Major physicochemical characteristics of LD including the color, percentage of 48-h drip loss, 24-h pH and percentages of crude protein and fat were not influenced by slaughter wt. Marginal profit of the 130-kg vs. 110-kg market pig was approximately 󰠏20,000 won/head, which resulted primarily from the heavy carcass weight of the former exceeding the upper limit of the A- or B-grade. However, if it had not been for the carcass weight limit of the current grading system, a 130-kg market pig would have had a potential marginal profit greater than 20,000 won. Results suggest that slaughter wt of lean-line finishing pigs can be increased to 130kg without significantly compromising the growth efficiency and carcass quality and accordingly, the upper weight limit of the ‘good-grade’ carcass needs to be increased or abolished to accommodate the larger market pigs.

Social Network Analysis for the Effective Adoption of Recommender Systems (추천시스템의 효과적 도입을 위한 소셜네트워크 분석)

  • Park, Jong-Hak;Cho, Yoon-Ho
    • Journal of Intelligence and Information Systems
    • /
    • v.17 no.4
    • /
    • pp.305-316
    • /
    • 2011
  • Recommender system is the system which, by using automated information filtering technology, recommends products or services to the customers who are likely to be interested in. Those systems are widely used in many different Web retailers such as Amazon.com, Netfix.com, and CDNow.com. Various recommender systems have been developed. Among them, Collaborative Filtering (CF) has been known as the most successful and commonly used approach. CF identifies customers whose tastes are similar to those of a given customer, and recommends items those customers have liked in the past. Numerous CF algorithms have been developed to increase the performance of recommender systems. However, the relative performances of CF algorithms are known to be domain and data dependent. It is very time-consuming and expensive to implement and launce a CF recommender system, and also the system unsuited for the given domain provides customers with poor quality recommendations that make them easily annoyed. Therefore, predicting in advance whether the performance of CF recommender system is acceptable or not is practically important and needed. In this study, we propose a decision making guideline which helps decide whether CF is adoptable for a given application with certain transaction data characteristics. Several previous studies reported that sparsity, gray sheep, cold-start, coverage, and serendipity could affect the performance of CF, but the theoretical and empirical justification of such factors is lacking. Recently there are many studies paying attention to Social Network Analysis (SNA) as a method to analyze social relationships among people. SNA is a method to measure and visualize the linkage structure and status focusing on interaction among objects within communication group. CF analyzes the similarity among previous ratings or purchases of each customer, finds the relationships among the customers who have similarities, and then uses the relationships for recommendations. Thus CF can be modeled as a social network in which customers are nodes and purchase relationships between customers are links. Under the assumption that SNA could facilitate an exploration of the topological properties of the network structure that are implicit in transaction data for CF recommendations, we focus on density, clustering coefficient, and centralization which are ones of the most commonly used measures to capture topological properties of the social network structure. While network density, expressed as a proportion of the maximum possible number of links, captures the density of the whole network, the clustering coefficient captures the degree to which the overall network contains localized pockets of dense connectivity. Centralization reflects the extent to which connections are concentrated in a small number of nodes rather than distributed equally among all nodes. We explore how these SNA measures affect the performance of CF performance and how they interact to each other. Our experiments used sales transaction data from H department store, one of the well?known department stores in Korea. Total 396 data set were sampled to construct various types of social networks. The dependant variable measuring process consists of three steps; analysis of customer similarities, construction of a social network, and analysis of social network patterns. We used UCINET 6.0 for SNA. The experiments conducted the 3-way ANOVA which employs three SNA measures as dependant variables, and the recommendation accuracy measured by F1-measure as an independent variable. The experiments report that 1) each of three SNA measures affects the recommendation accuracy, 2) the density's effect to the performance overrides those of clustering coefficient and centralization (i.e., CF adoption is not a good decision if the density is low), and 3) however though the density is low, the performance of CF is comparatively good when the clustering coefficient is low. We expect that these experiment results help firms decide whether CF recommender system is adoptable for their business domain with certain transaction data characteristics.

Effect of Freezing and Thawing Condition on the Physical Characteristics of Blanched Bean Sprouts as Home Meal Replacement (냉.해동 조건에 따른 간편편이식 콩나물의 물리적 품질 변화)

  • Jang, Min-Young;Jung, You-Kyoung;Min, Sang-Gi;Cho, Eun-Kyung;Lee, Mi-Yeon
    • Culinary science and hospitality research
    • /
    • v.20 no.6
    • /
    • pp.235-244
    • /
    • 2014
  • The purpose of this study was to investigate the effect of freezing and thawing rate on the physical properties of soybean sprouts to improve the quality of processed soybean sprouts during distribution and storage. Cooked soybean sprouts were frozen by air-blast freezing (ABF) system at $-45^{\circ}C$ or natural air convection freezing (NCF) system at $-24^{\circ}C$, then thawed using microwave oven by varying output power (0, 400, 800 and 1,000 W) until $75^{\circ}C$. The quality of soybean sprouts was measured by the water content, hardness and springiness. In addition, the internal microstructure of soybean sprouts was observed by optical microscope. For results, water content of soybean sprouts thawed by 1,000 W in a microwave showed the lowest value after natural air convection freezing. Springiness of soybean sprouts thawed by all amounts of output power was decreased in comparison with control. Hardness was increased only in soybean sprouts thawed by 1,000 W after air-blast freezing. However the gaps between springiness and hardness were relatively small with control at 1,000 W thawing, after air-blast freezing. Internal microstructure of the soybean sprouts was more damaged as freezing and thawing time were increased. In conclusion, high freezing and thawing rate might improves the quality of soy bean sprout, and IQF freezing and 1,000 W of microwave thawing appears to be the optimum condition for frozen HMR production. From the results freezing and thawing process parameters might can be use as quality control parameters as various type of sprout products processing.

Effect of Exogenous Application of Salicylic Acid or Nitric Oxide on Chilling Tolerance and Disease Resistant in Pepper Seedlings (외생 살리실산과 일산화질소 처리가 고추묘의 저온 내성 및 병 저항성에 미치는 영향)

  • Park, Song-Yi;Kim, Heung-Tae;Oh, Myung-Min
    • Journal of Bio-Environment Control
    • /
    • v.23 no.4
    • /
    • pp.329-336
    • /
    • 2014
  • As an abiotic stress, chilling stress is one of the major factors limiting plant growth and increasing susceptibility to pathogens. Therefore, enhancing stress tolerance in plants is an important strategy for their survival under unfavorable environmental conditions. The objective of this study was to determine the effects of the exogenous application of salicylic acid (SA) or nitric oxide (NO) on chilling tolerance in pepper seedlings. Pepper (Capsicum annuum L. 'kidaemanbal') seedlings were grown under normal growing conditions ($20/25^{\circ}C$, 15 hours photoperiod, $145{\pm}5{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, fluorescence lamps) for 23 days after transplanting. The solution (3 mL) of 1 mM SA and 0.3 mM NO with surfactant triton 0.1% were sprayed two times a week, respectively. Right after the completion of chemical application, seedlings were subjected to chilling condition at $4^{\circ}C$ for 6 hours under dark condition and then the seedlings were recovered at the normal growing conditions for 2 days. In order to assess plant tolerance against chilling stress, growth characteristics, chlorophyll fluorescence (Fv/Fm), and membrane permeability were determined after chilling stress imposition. Total phenolic concentration and antioxidant capacity were measured during the whole experimental period. Disease incidence for pepper bacterial spot and wilt was also analyzed. Pepper seedlings treated with SA or NO were maintained similar dry mass ratio, while the value in control increased caused by chilling stress suggesting relatively more water loss in control plants. Electrolyte leakage of pepper seedlings treated with SA or NO was lower than that of control 2 days after chilling treatment. Fv/Fm rapidly decreased after chilling stress in control while the value of SA or NO was maintained about 0.8. SA increased higher total phenolic concentration and antioxidant capacity than NO and control during chemical treatment. In addition, increase in total phenolic concentration was observed after chilling stress in control and NO treatment. SA had an effect on the reduction of bacterial wilt in pepper seedlings. The results from this study revealed that pre-treatment with SA or NO using foliar spray was effective in chilling tolerance and the reduction of disease incidence in pepper seedlings.

Factors Affecting True Metabolizable Energy Determination of Poultry Feedingstuffs IV. The Effect of Protein Levels of Basal Diets on the Corrected Apparent Metabolizable Energy of Farrell and True Metabolizable Energy Values of Corn and Soybean Meal (양계사료의 True Metabolizable Energy 측정에 영향하는 요인에 관한 시험 IV. 기초사료의 단백수준이 옥수수와 대두백의 Corrected Apparent Metabalizable Energy of Farrell 및 True Metabolizable Energy 가에 미치는 영향)

  • 이영철
    • Korean Journal of Poultry Science
    • /
    • v.11 no.2
    • /
    • pp.99-108
    • /
    • 1984
  • The experiment was performed with the aim to study not only the effect of protein levels of basal diets on apparent and true metabolizable energy (AME and THM), AME of Farrell(AME$\_$F/), and corrected AME$\_$FC/ values of corn and soybean meal but also the effect of collection time of excreta on AME and TME values of corn and soybean meal. The AME$\_$F/ and AME$\_$FC/ values of test materials were determined through rapid AME bioassay, and AME and TME by the TME bioassay. The protein levels of basal diets had range from 10% crude protein(CP) to 30% CP. The results obtained were as follows; 1. The AME$\_$F/ values of basal diets showed much difference among treatments (P<0.05) but those of corn and soybean meal had no significant differences (P>0.05)and the AHE$\_$FC/ values of basal diets were proved to be variable according to level of protein of the diets. the AME$\_$FC/ values of com were not different while those of soybean meal in 20% and 30% were reduced significantly(P<0.05). 2. The protein intake/bird/day did not differ significantly due to variation of feed intake using rapid AME bioassay. 3. The protein levels of basal diets did not influence upon the AME value of basal diets, corn and soybean meal (P>0.05), and no clear trend was found in the TME values of corn and soybean meal because of the variation of metabolic fecal energy plus endogenous urinary energy (FEm+UEe) losses fed different diets. 4. Collection time of excreta affected the AME and TME values of basal diets in 10, 15, 20% CP treatments, but the AME and TME of corn and soybean meal were not affected by collection time; Thus, a time of 24 hours was mough for 24 hr to clean the digestive tract when fed corn and soybean meal substituted diets regardless of protein levels.

  • PDF

Overview of Real-time Visibility System for Food (Livestock Products) Transportation Systems on HACCP Application and Systematization (축산물 유통단계의 HACCP 적용과 체계화를 위한 실시간 관제시스템에 대한 현황)

  • Kim, Hyoun-Wook;Lee, Joo-Yeon;Hong, Wan-Soo;Hwang, Sun-Min;Lee, Victor;Rhim, Seong-Ryul;Paik, Hyun-Dong
    • Food Science of Animal Resources
    • /
    • v.30 no.6
    • /
    • pp.896-904
    • /
    • 2010
  • HACCP is a scientific and systematic program that identifies specific hazards and gives measurements in order to control them and ensure the safety of foods. Transportation of livestock and its products is one of the vulnerable sectors regarding food safety in Korea, as meats are transported by truck in the form of a carcass or packaged meat in a box. HACCP application and its acceleration of distribution, in particular transportation, are regarded as important to providing consumers with ultimately safe livestock products. To achieve this goal, practical tools for HACCP application should be developed. Supply chain management (SCM) is a holistic and strategic approach to demand, operations, procurement, and logistics process management. SCM has been beneficially applied to several industries, notably in vehicle manufacture and the retail trade. HACCP-based real-time visibility system using wireless application (WAP) of the livestock distribution is centralized management system that enables control of temperature and HACCP management in real-time for livestock transportation. Therefore, the application of HACCP to livestock distribution (transportation, storage, and sale) can be activated. Using this system, HACCP management can be made easier, and distribution of safe livestock products can be achieved.

Phytochemical compounds and quality characteristics of spray-dried powders with the blanching condition and selected forming agents from pressed extracts of Ligularia fischeri leaves (블랜칭 처리 및 부형제 종류에 따른 곰취 착즙액 분무건조 분말의 phytochemical 성분 및 품질특성)

  • Kim, Jae-Won;Park, In-Kyung;Youn, Kwang-Sup
    • Food Science and Preservation
    • /
    • v.20 no.5
    • /
    • pp.659-667
    • /
    • 2013
  • This study was performed to determine the effects of the blanching condition (immersion ratio 1:15 (w/v) for 3 min at $95^{\circ}C$, and solution containing 1% sodium chloride) and selected forming agents (dextrin DE=10, dextrin DE=20, ${\beta}$-cyclodextrin; each forming agents added 5%) on the phytochemical compounds and quality characteristics of Ligularia fischeri leaves. The moisture was not affected by the forming agent. The color of a, b and chroma values were low in the blanching treatment groups and were significantly lowest with ${\beta}$-cyclodextrin (CD). The polyphenol and flavonoid contents in the blanching treatment groups were higher than those in the non-blanching-treatment group. The ascorbic acid content was higher in the non-blanching-treatment group and was significantly highest in the group treated with dextrin (DE=10) whereas the blanching treatment groups showed lower dehydroascorbic acid content than the non-blanching-treatment group. The water absorption was higher in the non-blanching-treatment group and was significantly highest in the group treated with CD. The water solubility in the blanching treatment groups treated with dextrin (DE=20) and CD was higher than that in the blanching treatment group treated with DE=10. The total chlorophyll and chlorophyll a and b contents were high in the blanching treatment group treated with CD, and for the total carotenoid contents, the same tendency as that seen with the chlorophyll content was observed. With regard to the particle diameter, those in the blanching treatment groups were lower than that in the non-blanching-treatment group and was significantly lowest in the blanching treatment groups treated with DE=20 and CD. The result of SEM observation showed that the spray-dried powders in blanching treatment groups treated with the DE=20 and CD forming agents had uniform particle distribution.

Primary Adenosquamous Carcinoma of the Stomach (위에서 발생한 선-편평세포암종)

  • Cho, Yong-Kwon;An, Ji-Yeong;Hong, Seong-Kweon;Choi, Min-Gew;Noh, Jae-Hyung;Sohn, Tae-Sung;Kim, Sung
    • Journal of Gastric Cancer
    • /
    • v.6 no.1
    • /
    • pp.31-35
    • /
    • 2006
  • Purpose: A primary adenosquamous carcinoma of the stomach is relatively rare, accounting for only about 0.5% of all gastric cancers. However, its histopathologic characteristics are still unclear, and the most appropriate form of therapy has not been established yet. Materials and Methods: We retrospectively reviewed the clinicopathologic features of 8 patients with pathologically confirmed primary adenosquamous carcinomas out of 8,268 patients who underwent gastric cancer surgery at Samsung Medical Center between September 1994 and December 2004. Results: The median age of the 8 patients was 49 ($41{\sim}69$) years, and the male : female ratio was 5 : 3. In 3 patients, the tumor was located at the mid body of the stomach, and in 5 patients, at the lower body or antrum. The tumor sizes were $2.5{\sim}8cm$. Seven patients showed metastases to the regional lymph nodes. The UICC stage distribution were: 5 stage II, 2 stage III, and 1 stage IV. In the stage IV patient, a palliative gastrojejunostomy was performed, and he died 5 months after surgery. Of the 7 patients who underwent a radical gastrectomy and adjuvant chemotheratpy, the median survival was 34 ($12{\sim}66$) months, 2 patients died of cancer recurrence, and 4 patients are being followed up without evidence of recurrence. Conclusion: As for an adenocarcinoma of the stomach, a radical gastrectomy including regional lymph node dissection and postoperative adjuvant therapy should be performed for appropriate treatment of an adenosquamous carcinoma of the stomach.

  • PDF

A Fluid Analysis Study on Centrifugal Pump Performance Improvement by Impeller Modification (원심펌프 회전차 Modification시 성능개선에 관한 유동해석 연구)

  • Lee, A-Yeong;Jang, Hyun-Jun;Lee, Jin-Woo;Cho, Won-Jeong
    • Journal of the Korean Institute of Gas
    • /
    • v.24 no.2
    • /
    • pp.1-8
    • /
    • 2020
  • Centrifugal pump is a facility that transfers energy to fluid through centrifugal force, which is usually generated by rotating the impeller at high speed, and is a major process facility used in many LNG production bases such as vaporization seawater pump, industrial water and fire extinguishing pump using seawater. to be. Currently, pumps in LNG plant sites are subject to operating conditions that vary depending on the amount of supply desired by the customer for a long period of time. Pumps in particular occupy a large part of the consumption strategy at the plant site, and if the optimum operation condition is not available, it can incur enormous energy loss in long term plant operation. In order to solve this problem, it is necessary to identify the performance deterioration factor through the flow analysis and the result analysis according to the fluctuations of the pump's operating conditions and to determine the optimal operation efficiency. In order to evaluate operation efficiency through experimental techniques, considerable time and cost are incurred, such as on-site operating conditions and manufacturing of experimental equipment. If the performance of the pump is not suitable for the site, and the performance of the pump needs to be reduced, a method of changing the rotation speed or using a special liquid containing high viscosity or solids is used. Especially, in order to prevent disruptions in the operation of LNG production bases, a technology is required to satisfy the required performance conditions by processing the existing impeller of the pump within a short time. Therefore, in this study, the rotation difference of the pump was applied to the ANSYS CFX program by applying the modified 3D modeling shape. In addition, the results obtained from the flow analysis and the curve fitting toolbox of the MATLAB program were analyzed numerically to verify the outer diameter correction theory.