가변 인덕터를 사용한 고효율 임계 도통 모드 (CRM) 부스트 power factor corrector (PFC) 을 제안한다. 입력 전압에 따라 부스트 인덕턴스 ($L_B$) 을 변화시킴으로써 고효율이 요구되는 $230V_{ac}$의 노미날 입력 전압에서 스위칭 손실을 줄일 수 있다. 가변 인덕터는 코어에 충분한 직류 전류가 흐를 때 투자율이 변하는 코어 본연의 성질을 이용해 구현 가능하다. 노미날 입력시에는 큰 $L_B$을 갖음으로써 스위칭 손실을 줄일 수 있다. $255V_{ac}$ 이상의 큰 입력 전압이 들어오는 경우에는 인덕턴스를 줄여준다. 실험을 통해 제안한 컨버터의 성능을 검증하였다.
In this paper, we propose the method to use power-saving mode (PSM) applicable to non real-time traffic and PSM applicable to real-time traffic simultaneously, for VoIP traffic with silence suppression. The proposed method uses PSC II during talk-spurt interval of parties A and/or B and uses PSC I or probabilistic sleep interval decision (PSID) method during mutual silence interval, respectively. To evaluate the performance of hybrid PSM (HPSM) based on PSC II or PSID method, we present average buffering delay, energy consumption of mobile station and VoIP packet drop probability with simulation runs. Results shows that proposed HPSM decreases energy consumption of mobile station up to 25 % while satisfying the packet drop probability within QoS requirement in case of end-to-end VoIP connection.
Proceedings of the Korean Society of Broadcast Engineers Conference
/
2015.07a
/
pp.549-551
/
2015
HEVC의 화면 내 예측에서는 35가지의 화면 내 예측 모드 중 최적의 모드를 결정하기 위한 다양한 과정이 있다. 이러한 과정 속에서 특히나 많은 비중을 차지하는 부분이 바로 RQT 과정이다. RQT 과정을 거치기 전에 35가지의 모드 중, RMD 과정을 거쳐 RQT 과정을 거칠 RD 후보 모드 군을 결정한다. RQT 과정은 각 모드 별로 RD-cost를 구하여 최적 모드가 결정되기 때문에, 많은 복잡성이 요구 된다. 본 논문에서는 최소한의 화질 열화와 함께 인코더의 빠른 부호화를 위하여 RQT 과정을 거치게 될 RD 후보들의 수를 PU 주변의 화면 내 예측 모드 정보를 이용하여 현재 PU의 방향성을 어느 정도 예측 하여 보다 빠르고 효율적인 화면 내 예측 방법을 제안한다. 실험 결과에서 ${\Delta}BD$-PSNR은 최대 0.059dB 정도의 손실만을 유지하면서, 인코더 복잡성은 최대 7.63%까지 빨라짐을 확인 하였다.
The Journal of Korean Institute of Electromagnetic Engineering and Science
/
v.14
no.11
/
pp.1198-1206
/
2003
In this paper, a MMIC waveguide mixer module based upon the novel suggested mode converter for wave-guide-to-microstrip transition was fabricated and measured. The insertion and return losses of the mode converter was optimized by compensating the discontinuity effect between ridge and microstrip with the modification of 50 $\Omega$ microstrip line pattern. Due to the low loss nature of the mode converter, a millimeter wave MMIC mixer chip can be successfully applied as a waveguide module for mmW waveguide communication system. The measured results of the module showed the successful MMIC chip application in waveguide and the negligible degradation of the supplied chip specification.
To increase the tolerance for passive fiber alignment, a single mode polymer waveguide with a large core structure is demonstrated. The large core waveguide is designed to have a mode profile comparable to that of a thermally expanded core (TEC) fiber, and it can be connected to a high-contrast waveguide through an adiabatic transition taper structure. From a waveguide with a rectangular core of 25 ${\times}$ 25 ${\mu}{\textrm}{m}$$^2$, a single mode propagation is observed when the index contrast is as low as 0.0005. A UV-cured injection molding method is used to fabricate the thick core structure. Due to the large mode size, the insertion loss of the device is below 0.5 dB until the lateral displacement of the TEC fiber is 4.5 ${\mu}{\textrm}{m}$. The low insertion loss is important for reproducible passive alignment.
The Journal of the Institute of Internet, Broadcasting and Communication
/
v.23
no.6
/
pp.41-46
/
2023
Design of W-band TE10 to TEM mode converter for radial power combiner is proposed in this paper. The proposed structure is used with generally available pin to realize TEM mode and is designed to convert TE10 to TEM mode gradually using 2-step impedance transformer and back short. The pin of proposed mode converter is well bonded to the housing so that environment conditions such as vibration or shock are not affected. The proposed mode converter, in a back-to-back configuration, has less than 1.55 dB insertion loss and more than 10 dB return loss from 92.5 GHz to 97.7 GHz. Proposed converter is expected compact radar and various applications requiring for high power and stable environment conditions.
Proceedings of the Optical Society of Korea Conference
/
2000.02a
/
pp.280-281
/
2000
Internet사용자의 급격한 증가에 따라 저가격이며 대용량의 optical access network의 구축이 시급한 실정이다. 광통신의 infrastructure를 구성하기 위해서는 광모듈의 저가격화가 가장 시급한 문제이다. 광모드 변환기가 집적된 반도체 레이저(SSC-LD)는 단일모드광섬유와의 광결합 손실 및 정렬허용오차, 동작시간, 광출력 등을 향상시킬 수 있어, 광가입자계 광송수신모듈의 가격을 낮출 수 있어 최근 매우 활발히 연구되고 있다. (중략)
Proceedings of the Optical Society of Korea Conference
/
2001.02a
/
pp.30-31
/
2001
다중모드간섭을 이용한 소자는 집적광학에서 광신호의 분리와 결합에 있어서 널리 사용되고 있다. 이러한 소자는 편광상태와 파장에 덜 민감하며, 광 대역폭과 제작 허용오차가 크다는 장점을 가진다. 이러한 다중모드간섭기의 설계에 있어서 간섭기의 폭은 주로 출력단에서의 도파로 폭과 도파로간 간격으로부터 정해져왔다. 본 연구에서는 특별히 광신호의 효율적인 분배를 위해 간섭기의 폭과 관련하여 광 분배기의 손실 및 균일도를 최적화하기 위한 방안을 강구하였으며, 근사적인 이론식에 의한 결과와 비교하였다. (중략)
Journal of the Korean Institute of Telematics and Electronics
/
v.6
no.1
/
pp.54-56
/
1969
무손실 주기구조에 의한 단대역의 제거와 영, π모드에 대한 공류현상에 대하여 기술하였다. 특수한 2개의 구조내의 2개의 통과모드가 공류점에서 영이 아닌 군속도를 가질 수 있음이 해석에 의하여 알려졌으며 이 공류현상은 모드분리를 뚜렷이 하기 때문에 선형가속기로서 유용하다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.