• Journal of the korean veterinary medical association
• /
• v.18 no.12
• /
• pp.29-34
• /
• 1982

두가지 방법의 Tension Suture가 개에서 손상을 입은 피부의 접합에 평가되어졌다. 이들 술식은 Vertical Mattress Tension Suture와 'Walking'봉합이다. 7주후에 타원형으로 손상된 피부의 반흔조직을 추적하여 면적을 측정하였다. 흠손된 피부의 반흔조직의 평균 넓이는 V.M.T.S의 $5.29cm^2$에 비해 'Walking'봉합의 경우는 $2.07cm^2$였다. 이는 'Walking'봉합의 경우가 명백히 반흔조직이 좁다는 것이 관찰되었다. 더구나 어떤 손상의 경우더라도 'Walking'봉합은 열개(봉합한 자국)가 발견되지 아니했다.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1674-1678
• /
• 2008

자가손상복구 기법에서 마이크로캡슐은 손상복구 효율을 좌우하는 중요한 역할을 한다. 본 연구에서는 다양한 종류의 손상복구액을 함유한 마이크로캡슐을 Melamine/Urea/Formaldehyde를 외벽물질로 하여 in-situ 중합법에 의해서 oil-in-water emulsion 방법으로 제조하였다. 제조된 마이크로캡슐을 광학현미경, 주사전자현미경으로 캡슐 모폴로지, 외부 및 내부표면, 외벽 두께 등을 조사하였다. 그리고 입도분석기를 이용하여 캡슐의 크기를 측정하였으며 그 결과 캡슐의 직경은 평균 약 120 마이크론 정도였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.329-329
• /
• 2010

반도체 및 디스플레이의 진공부품은 알루미늄 모제에 전해연마법(electrolytic polishing), 양극산화피막법(Anodizing), 플라즈마 용사법(Plasma spray) 등을 사용하여 $Al_2O_3$ 피막을 성장시켜 사용되고 있다. 반도체 제조공정 중 30~40% 이상의 비중을 차지하는 식각(etching) 및 증착(deposition) 공정은 대부분 플라즈마를 사용하고 있다. 플라즈마에 의해 화학적, 물리적 침식이 발생하여 코팅막에 손상을 일으켜 코팅막이 깨지거나 박리되면서 다량의 Particle을 생성함으로써 생산수율에도 문제를 야기 시킨다고 알려져 있다. 하지만 이들 코팅막을 평가하는 방법은 거의 전무하여 산업계에서 많은 애로를 겪고 있다. 이러한 코팅부품의 내플라즈마 성능평가 방법과 기준이 없어 적절한 교체시기를 파악하기 위한 코팅부품의 손상정도를 정량화 및 평가 방법의 표준화를 구축하는 연구를 수행하였다. 본 연구에서는 이러한 소재의 특성평가를 위해 공정에서 사용 중 손상되어 교체된 샘플의 모폴로지 관찰하고 내전압 측정으로 전기적 특성을 분석하여 손상 전, 후의 변화를 관찰하였다. 또한 플라즈마의 영향에 따른 코팅 막 형태 변화 및 전기적 특성의 변화를 알아보기 위하여 양극산화피막법(Anodizing)으로 $Al_2O_3$를 성장시킨 평가용 샘플을 제작한 후, Plasma chamber 장비를 이용하여 플라즈마 처리에 따른 코팅막의 내전압, 식각율, 표면 미세구조의 변화를 측정하였고 이를 종합적으로 고려하여 진공 장비용 코팅부품의 공정영향에 의한 내플라즈마 특성평가방법 개발에 관하여 연구하였다. 이러한 실험을 통해 플라즈마 처리 후 코팅 막에 크랙이 발생되는 것을 확인할 수 있었고 코팅 막의 손상으로 전기적 특성이 감소를 것을 확인할 수 있었다. 또한 ISPM 장비를 이용하여 진공 장비용 코팅부품이 플라즈마 공정에서 발생하는 오염 입자를 측정할 수 있는 방법을 연구하였다. 이러한 결과를 이용하여 진공공정에서 사용되는 코팅부품이 플라즈마에 의한 손상정도를 정량화 하고 평가방법을 개발하여 부품 양산업체의 진공장비용 코팅부품 개발 신뢰성 향상이 가능할 것으로 본다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.3
• /
• pp.179-186
• /
• 2021

In general, the daily safety inspection activities, which investigate damages in structures and measures the size of the damage, have been relied heavily on the visual inspection so far. Since the probe of the condition and performance of facilities by such personnel is often dependent on the subjective judgment of the investigator, the consistency and repeatability of the probing results may reduce. Particularly, damage located in a difficult-to-reach place depends mainly on experience with the naked eye, and an unsafe method using a ladder has mainly applied when necessary. Therefore, in this study, we tried to propose a way of using images that can reduce the deviation between safety inspection investigators, enhance objectivity, and improve the safety of workers. In this study, we have applied homographic transformation as a method of correcting the image. As a result of analyzing the size of the damage in the corrected image of the test subject, it confirms that the accuracy of measuring the magnitude of the damage can satisfy the target levels of 5.0mm and 0.005m², the target accuracy levels. As a result of the field verification test to which the proposed image correction technique applied, the coefficient of variation of the crack length in the structure decreased from 5.4~7.0% to 0.072~0.12%, and that of the damaged area from 10.9% to 1.6%. It confirms that the measurement accuracy is improved. Therefore, it is expected that this study on the image utilization technique in safety inspection activities can increase the accuracy of damage measurement and improve the reliability of the safety inspection reports and exterior survey drawings.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.2
• /
• pp.204-212
• /
• 2001

In this study, an FRF-based structural damage identification method (SDIM) is proposed for plate structures. The present SDIM is derived from the partial differential equation of motion of the damaged plate, in with damages we characterized by using a damage distribution function. The appealing features of the present SDIM include the followings. First, the modal data of the damaged structure are not required. Secondly, a sufficient number of information can be generated from the measured FRFs by simply varying excitation frequencies and response measurement points. The feasibility of the present SDIM is verified through some numerically simulated damage identification tests.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2819-2830
• /
• 2009

Load bearing structural members in a wide variety of applications accumulate damage over their service life. During experiment much effort and cost is needed for measuring structural safety assessment. The sparseness and errors of measured data have to be considered during the safety estimation of structures. This paper introduces parameter estimation and damage identification algorithm by a system identification using static and dynamic response. The equation error estimator and response error widely used in system identification are based on the minimization of least squared error between measured and calculated responses by a mathematical model of a structure. Since each estimator has a specific form of application in noisy environment and proposes different definitions for these forms. To study the behaviour of the estimators in noisy environment Using Monte Carlo simulation, and a data measured pertubation scheme is adopted to investigate the influence of measurement errors on identification results. The assessment result by static and dynamic response were compared, and the efficiency and applicabilities of the proposed algorithm are demonstrated through simulated static and dynamic responses of a dimensional truss type structures.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.200-204
• /
• 2009

구조물의 건전도를 평가하기 위하여 계측된 데이터로부터 구조물의 동특성 변화를 분석하여 손상정도를 추정하는 방법이 많이 사용되고 있다. 최근, 다점 측정된 가속도 데이터로부터 구조물의 고유진동수 및 모드형상을 추출하고 이를 초기값과 비교하여 손상탐지를 실시함으로써 손상위치 및 손상정도를 추정하는 기법이 활발히 연구되고 있다. 그러나 이러한 방법을 실제 적용하기 위해서는 계측시스템 구축에 많은 비용이 소요되며, 손상탐지를 위한 해석과정이 복잡하기 때문에 실시간에 가깝게 유용한 정보를 거주자에게 제공하는데 한계가 있다. 따라서 본 연구에서는 실용적인 계측유지관리 시스템을 구축할 수 있도록 구조물의 손상도에 따른 동적특성의 변화를 사전에 예측하여 실제 계측된 동적특성에 대한 관리 한계치를 제공하는 방안을 제시하고자 한다.

• Clinical and Experimental Pediatrics
• /
• v.46 no.7
• /
• pp.687-694
• /
• 2003

Purpose : Regeneration and repair after ischemic renal injury appears to be modulated by circulating or locally produced growth factors. This study examined the changes of serum insulin like growth factor(IGF-I) and renal expression of IGF-I and II, vascular endothelial growth factor(VEGF), transforming growth $factor-{\beta}$($TGF-{\beta}$), and connective tissue growth factor(CTGF) during the active regeneration period after acute ischemic injury. Methods : Sera and kidney tissue samples(whole kidney, cortex, outer medullae and inner medullae) were obtained before and after one, three, five and seven days of 40 minutes bilateral renal pedicle clamping. Acute renal failure was assessed by measuring the concentration of serum creatinine. Serum IGF-I level was measured by radioimmunoassay. The mRNA expression in kidney was measured by RT-PCR. The distribution of IGF-I and CTGF was detected by immunohistochemistry. Resuts : Serum IGF-I concentration after one day following acute ischemic renal injury was significantly decreased compared to preischemic value. The mRNA levels of IGF-I, IGF-II, $TGF-{\beta}1$ and VEGF in whole kidney were temporally decreased on day one of ischemic injury. IGF-I and IGF-II expressions in outer medullae were significantly decreased on day one after ischemic injury. $TGF-{\beta}1$, CTGF and VEGF expressions were markedly decreased in medullae after one day of ischemic injury compared to other kidney sections. IGF-I was markedly decreased in cortical tubules on day one of uremic rat. CTGF was markedly increased on tubule within three days of ischemic injury. Conclusion : These findings suggest that IGFs, $TGF-{\beta}1$ and CTGF may involve in the pathogenesis or the recovery from acute ischemic renal injury.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.117-123
• /
• 1998

We investigated the effect of mechanical backside damage in Czochralski grown silicon wafer. The intensity of mechanical damage was evaluated by minority carrier recombination lifetime by laser excitation/microwave reflection photoconductivity decay method, photo-acoustic displacement method, X-ray section topography, and wet oxidation/preferential etching methods. The data indicate that the higher the mechanical damage intensity, the lower the minority carrier lifetime, and the photo-acoustic displacement values increased proportionally, and it was at Grade 1: Grade 2:Grade 3 = 1:19.6:41 that the normalized relative quantization ratio of excess photo-acoustic displacement in damaged wafer was calculated, which are normalized to the excess PAD from sample Grade 1.

• Journal of Ocean Engineering and Technology
• /
• v.8 no.1
• /
• pp.144-153
• /
• 1994

An algorithm to locate and estimate severity of damage in jacket-type offshore structures for which modal responses are availabit' for very few vibrational modes is presented. First, a theory of damage locaization and severity estimation(which yields information on the location and severity of damage directly from changes in mode shapes) is formulated. Next, the feasibility the damage detection algorithm is demonstrated by using a numerical example of an offshore jacket platform for which only three vibration modes are measured. Form the material presented here, two major results are observed. First, all damage locations in the offshore jacket platform are correctly predicted. Next, predicted damage is relatively correctly estimated.