• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.376-382
• /
• 2007

A Collapse of bridge by ship's collision to the bridge post may lead a great calamity. This paper investigates on avoiding collision between a ship and bridge by improvement of environmental factors, submitting a counter plan of reducing collision effect by triangular type of collision protecting bar and ship maneuvering skills. Putting up collision protecting bar fences of triangular type around the bridge posts would decrease the collision impact force by 75 percent.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.31-33
• /
• 2007

최근에 선박이 대형화, 고속화되면서 선수 충격파 영향으로 인하여 선체 또는 화물에 잦은 손상을 초래하기도 하고, 극단적인 상황에서는 선박이 절단되기도 한다. 본 논문에서는 내항성능 평가요소 중 하나인 상하가속도 값을 선교에 설치된 선체감시장치를 이용하여 해상상태별 변화량을 계측하고, 이를 모형시험 및 이론계산 결과와 상호 비교하였다. 또한 ITTC 에서 제시하는 내항성능 기준치와도 비교함으로써 실습선 한바다호의 내항성능을 확인하였다. 이러한 결과는 앞으로 경험할 수 있는 다양한 해상상태에서의 작업가능성 및 위험성 정도의 예측을 가능하게 함으로써 선박의 안전운항에 큰 도움이 될 것으로 판단되며, 또한 다양한 실선계측 자료를 통하여 조선소에서는 보다 우수한 성능의 선박 건조가 가능하리라 본다.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.3
• /
• pp.113-122
• /
• 2000

본 논문에서는 손상선박의 안전대책에 관한 연구의 일환으로서, 황천항행중인 선박이 충돌, 좌초 등 원인에 의해 조종불능이 되었을 때를 가상하고, 예선ㆍ피예선계의 침로안정성에 미치는 풍향, 풍속, 예항삭의 길이의 영향을 이론적으로 검토하고, 풍압하에서 피예선을 다른 안전한 장소로의 예항에 대하여 하나의 지침을 주는 것을 목적으로 한다. 여기에서 실선은 Hulk carrier와 Passenger liner를 모델로 삼았고 외력으로서는 파도가 충분히 발달되지 않은 바람이 부는 초기상태 혹은 저속으로 항행하는 상태를 고려하여 바람의 영향만을 취급하며 피예선은 조타를 하지 아니한다.

• Journal of Korea Ship Safrty Technology Authority
• /
• v.7
• /
• pp.27-37
• /
• 2001

소형 어선의 조업 환경을 개선하고자 하는 선주와 어민 입장에서 연안에서 번번히 발생하는 그물 걸림이나 충돌시 손상이 적은 추진장치를 저렴하게 공급받기를 원한다. 어선의 고속화 및 낚시전용선 개발 추제에 부응하여 어선용 소형 물제트 추진장치의 특성을 파악하고, 시스템의 개념 설계, 시제품 제작과 시운전 시험을 통하여 실용화 가능성을 검토하였다. 어선의 저항 감소, 캐비테이션 억제 등과 관련된 한계 기술을 개발하는 후속 연구가 진행되고 있다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.160-161
• /
• 2021

추진동력원인 모터의 동력을 외부 수중에 있는 프로펠러에 전달하는데 있어서 해수 유입을 막은 수밀화 장치를 해야하고 매년 정기적으로 또는 손상시 본 부품을 교체하는데 많은 비용을 들어 선박을 Dry dock나 Slip Way에 상가해서 교체하는 단점을 가지고 있다. 크루선에 장착된 Azipod System은 조정성이 우수해 자력 이접안이 가능하다. K-Azipod형 무접촉 동력전달 장치는 Azipod 및 일반 선박에도 적용이 가능한 제품이다.

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.213-221
• /
• 2007

Recently, environmental design are becoming a matter of grave concern in shipbuilding. Out of these concern, oil spilt which is induced by grounding accidents is very critical reason of the ocean pollution. Therefore, a series qf quarter of 105k tanker model grounding simulations were conducted to analyze it's characteristics for the accident. ship get using LS-DYNA3D. In this paper, to conduct whole simulations, a meshsize convergence test was carried out to determine appropriate meshsize for grounding test. After the series analysis. These results were analyzed as each case.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.4
• /
• pp.87-96
• /
• 2006

A ship collision analysis by finite element method is performed considering the effects of mass and speed of ship and material and shape of structures to analyze the dynamic characteristics by ship collision. From this analysis, collision load-time history and damage of ship and structures are obtained. In this study, results of finite element analysis are compared with previous studies in USA, Japan and some countries of Europe. Dynamic characteristics are different from each other according to interaction between ship and structures. It seems that there are lots of factor to have effects on the ship-structures interaction. Because little information is available on the behavior of the inelastic deformation of materials and structures during the type of dynamic impacts associated with vessel impact, assumptions based on experience and sound engineering practice should be substituted. Therefore more researches on the interaction between ship and structures are required.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.1
• /
• pp.14-21
• /
• 1994

The studios on the stability of damaged ships have been carried out continuously to prevent frequent damages or sinkings which cause large loss of life and fortunes. For dry cargo ships, continuing losses have resulted in new legislation of the probabilistic damage stability. IMO has developed requirements for the subdivison and damage stability of dry cargo ships based on probabilistic concepts. The calculation of the probabilistc damage stability is a complicated and iterative job hence development of computer programs is indispensable. In this research, programming of the probabilistic damage stability according to new requirements has been done and the results were compared with those carried out by the other foreign packages. New algorithm using a grid model in a transversal section was introduced to reduce efforts in preparing input data for damage scenarios and as a result, has brought significant improvement in efficiency and performance.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.4
• /
• pp.332-340
• /
• 2016

Sunken ships cause damage to the environment due to the dispersal of fuel oil and harmful cargo goods in the hull. Since the sunken ship is mostly flooded by the seabed, it tends to be in a relatively stable condition. However, the heavy body, together with the load of remaining goods in the cargo hold, the constant contact with the seabed, and ocean currents and tidal waves, can affect dispersal of residual fuel oils out of the sunken ship. Corrosion of the sunken ship starts upon sinking, decreasing the thickness of the hull structure and sub-materials. Therefore, it is necessary to assess the structural stability against the potential breakdown of the sunken ship. Whilst evaluating the danger of the sunken ship, this result should be reflected in 'the possible discharge'. This study was undertaken to suggest a procedure for a step by step evaluation to assess the structural stability a sunken ship. The structural stability assessment to estimate the collapsibility of the hull was structure targeted at the sunken ship 'No. 7 HaeSung', which was classified as the prime example for the intensive management of sunken ships. This study was undertaken to suggest a procedure for a step by step evaluation to assess the structural stability a sunken ship and to propose a method to conduct a structural safety assessment that estimates the collapsibility of the hull by targeting the sunken ship 'No. 7 HaeSung',which was classified as the prime example for the intensive management of sunken ships. The collapsibility of the hull structure was estimated Based on the damage size of the hull structure, and the corrosion rate of the hull structure and sub-materials due to the seawater after sinking. It was confirmed that there was a low possibility of the total destruction of the hull structure at the current time. However, there is a high possibility in the potential failure of the hull structure due to increased rate of corrosion thereafter. Therefore, we believe continuous study on influence of corrosion and marine environment change to sunken ship's structural safety is necessary.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.355-358
• /
• 2011

방충재(fender)는 항만에서 선박의 안전한 접이안, 계류, 안벽 보호를 하기 위하여 설치된 중요한 안벽 시설 중 하나이다. 기존의 고무 방충재는 접안력에 의한 초기 변형 28% 정도에서 가장 높은 반력이 발생하기 때문에 선박과 안벽에 지속적인 힘을 주기 때문에 안벽 및 선체에 손상을 주고 있다. 이는 잔교식이나 중력식 부두에서도 나타나는 현상이다. 또 선체의 용접 비드에 의하여 방충재 훼손으로 보수 유지비가 증가하고 안벽에 앵커로 고정된 고무 펜더는 유연성이 떨어져 선박 충격에 의한 쉽게 떨어지고 패널패드도 탈락된다. 이 연구에서는 초기 반력이 적은 에어 펜더 혹은 폼 펜더를 제안한다.