• Korean Journal of Environment and Ecology
• /
• v.29 no.4
• /
• pp.580-589
• /
• 2015

The artificially grown forests of larch, planted in accordance with the nationwide afforestation policy in the 1970s, are located inside national parks. This study intended to induce a forestation system by which the forests develop into an ecologically healthy and broadleaved ecosystem with broad species diversity. For this, the aspects of natural regeneration of broadleaves from 2010 to 2013 after thinning by density (30%, 50%, and 70%) in 2009 were surveyed using the larch forest in the Woljeong Temple region inside Odaesan National Park. There were no trees that were larger than 2 cm in in diameter at breast height among the trees recently introduced between 2012 and 2013. A significant number of herbs have been introduced to the subsurface alongside young arboreal trees species such as Bumalda bladdernut, Acer triflorum, Cornus controversa etc and shrubs. However, many woody species did not survive the competition with herbs and repeated withering and regeneration. The number of woody species generated within the 30% cutting area was 440 species in 2013 and this figure has been increasing twofold each year. The number of woody plants within the 50% cutting area also showed an upward tendency and most plants did not survive in the competition with herbs and Sasa borealis and withered in only 1 ~ 2 years after generation. Unlike other thinning areas, the 70% cutting area showed 608 broadleaved trees, reflecting a decrease from 748 trees in 2012. This appeared to be attributed to the luxuriance of S. borealis and the sharp increase of fatsia following the inflow of total sunlight to the forest floor. Herbs were hardly generated due to the influence of S. borealis. Regarding the density for thinning at 50% or upper height, the forest treatment division shall maintain a proper density in the course of inducing artificial forestation of larch into natural broadleaved forests considering the luxuriance of sasa borealis and herbs due to the inflow of total sunlight to the forest floor.

• Journal of Korean Society of Forest Science
• /
• v.100 no.4
• /
• pp.585-590
• /
• 2011

The purpose of this research is to suggest economic feasibility of cultivating Acer Mono by using profitability analysis to forest owners. To achieve this research objective, forest owner household survey with intensive cultivating has been conducted about a sap production on its age of tree. And input costs and sap production costs are calculated with silvicultural system from plant to regeneration cutting. Total income is the sum of its sap sales and thinning and regeneration cutting. The method of profitability analysis was used on the NPV(Net Present Value) and IRR(internal rate of return). Finally, when 3% discount rate is applied, NPV is about 59,436 thousand won and IRR value is 9.22% at this point. This result, therefore, proves that cultivating Acer Mono is economical feasibility to forest owners.

• Journal of Korean Society of Forest Science
• /
• v.105 no.3
• /
• pp.342-350
• /
• 2016

This study aims to make the stand density management diagram which is very useful for establishing systematic management plan and obtaining management goal in Pinus densiflora forest. To estimate 5 models mainly composed of stand density management diagram, we used total of 1,886 sample plots having more than 75% of the total basal area of the pine trees in each stand. To test the goodness of fit, $X^2$ was computed with a significance level of 5%, and the acceptable error range as 20%. Also standard deviation of the model was $34.59m^3{\cdot}ha^{-1}$, minimum acceptable error range was 16.59% and coefficient of variation was 22.11%. If we use the stand density management diagram, it would be useful to establish the timber yield and thinning plan understanding the pathway of stand density management.

• Journal of Korean Society of Forest Science
• /
• v.107 no.2
• /
• pp.174-183
• /
• 2018

This study aims to make the stand density management diagram which is useful for establishing stand density management system in Chamaecyparis obtusa forest. By using 216 sample plots to estimate Yield-Density relationship ($R^2=0.743$), the stand density management diagram was modeled by the estimated parameters. As a result of this diagram, after planting 3,000 trees per hectare the mortality rate of this unthinned C. obtusa stands over 80 years was estimated to be equal to $12.0{\sim}18.1trees{\cdot}ha^{-1}{\cdot}year^{-1}$, and stand volume was $463.1{\sim}695.4m^3{\cdot}ha^{-1}$, and stand density was $1,555{\sim}2,038trees{\cdot}ha^{-1}$. Developed stand density management diagram for C. obtusa is effective to establish the management criteria and production objective. Therefore, this study allowed us to make the optimal forest working plan.

• Korean Journal of Environment and Ecology
• /
• v.29 no.6
• /
• pp.907-916
• /
• 2015

The purpose of this study was to identify characteristics of vegetation structure, vegetation succession, and species diversity of artificially planted Chamaecyparis obtusa (CO) stands. The study was carried out by performing vegetation survey for eight CO stands located in Jeollanam-do Province, Korea. Analysis on vegetation classification and ordinations of the stands was conducted using the data from the vegetation survey, and as a result, the stands were classified into five types of communities. Community I showed a considerably lower index of species diversity when compared to other communities because the canopy of the dominant CO was so highly dense that the low-height vegetation was not able to develop or the low-height vegetation almost disappeared due to elimination of weed trees. Meanwhile, the Community II - IV had relatively higher indices of species diversity because various native tree species mixed with the low-height vegetation and competed with each other in the understory and shrub layers to some degree of stability or in their early stage of vegetation development. Community V, lastly, showed higher use intensity as a recreational forest, thus developing simpler vegetation structure on account of artificial intervention. There was positive correlation between photosynthetically active radiation entering the forest floor, number of observed species and index of species diversity. Such characteristics of vegetation structure in CO stands are closely associated with forest management and prescription for planting reforestation, thinning, and brush cutting in the past. There was a slight difference in vegetation structure and species diversity by communities, based on rotation time of the vegetational succession, process of disturbance frequency and disturbance, development, and maturity by planting CO stands. However, when compared to natural forests, the CO stands showed simpler vegetation structure. Because artificial forests are vulnerable in ecosystem service with lower species diversity, a drive for ecological management is needed for such forests to change into healthy ecosystems that can display functions of public benefit.

• Journal of Forest and Environmental Science
• /
• v.27 no.3
• /
• pp.195-203
• /
• 2011

Forest in the our country is in the age that needs positive operation in order to foster economical forest. Multiple operations for making valuable forest should be conducted steadily and timely from afforestation to harvesting. In order to execute these kinds of forest operations, the construction of skid trail network that can be effectively used as a pathway for forestry machine and working space is necessary. To investigate facility effect of skid trail network, we executed the location of skid trail network through centroid method by GIS for 50ha of harvesting workplace in mechanized model forest located in Hongcheon, Gangwon Province. As a result of this research, skid trail density in this area changed from 79m/ha with current method to 42m/ha with improved method. It appeared that skid trail density with improved method is nearly half of current method even though the cutting area is the same as the current cutting area. Also, skidding distance changed from 117m with current method to 57m with improved method. It appears that skidding distance with improved method is nearly half of current method even though cutting area was enlarged in adjacent tending cutting area.

• Journal of agriculture & life science
• /
• v.50 no.1
• /
• pp.105-115
• /
• 2016

This study was carried out to establish the optimum forest management plan for the Cryptomeria japonica plantations in southern inland and Jeju island in Korea. Sixty seven circular sample plots of 0.04ha were established and we surveyed vegetation structure and growth characteristics from three layers(upper, middle, and lower). As a result of cluster analysis obtained by importance values of each tree species, the community type of C. japonica stands were classified into C. japonica group(C1) and C. japonica-C obtusa group. C. obtusa community were also sbudivided into P. thunbergii-Q. serrata group(C2) and Q. serrata-C obtusa group(C3). In tree layers importance value(IV) of C. japonica were 97.2% in C1, 80.7% in C2, and 47.6% in C3 and in sub-tree layers IV were 8.9% in C1, 15.2% in C2, and 5.7% in C3. Especially in C3 there are bamboo species (Smilacina japonica var. lutecarpa and Pseudosasa japonica) it is necessary for us to control them. In shrub layers C. japonica were found in C1(9.2%) and C2(7.0%), but except for C3. In tree layer species diversity indices of each community ranged from the lowest 0.059 in C1 to the highest 0.548 in C3. Dominance ranged from 0.958 in C1 to 0.393 in C3 which may caused by interspecific competition. Current annual increment of diameter growth ranged from 7.01mm/yr to 8.04mm/yr. As a result of our study we recommend the application of proper thinning and pruning for C1 and C2.