• Journal of Digital Convergence
• /
• v.15 no.10
• /
• pp.211-219
• /
• 2017

Currently, enterprises are in a rapid flow of comvergence of industries in the ear of the 4th Industrial Revolution. Under this circumstances, change of economic condition, change of industrial structure, increase of women's advance into society. Based on such background of the times, the aim of this study is to examine the effect of work-home conflict on burnout and the moderating effect of self-efficacy in that relation. The research samples were obtained from nurses at hospitals in Daejeon-si, Sejong-si, Chungcheongnam-do and Chungcheongbuk-do. Total 360 copies of valid questionnaire was used for analysis. Specific analysis results from the research are as follows. Firstly, it was found that Work Interference with Family(WIF) had positive (+) impact on physical burnout. Family Interference with Work (FIW) had no impact on physical burnout. Secondly, it was found that Work Interference with Family(WIF) had positive (+) impact on emotional burnout and Family Interference with Work (FIW) had negative (-) impact on emotional burnout. Thirdly, self-efficacy had a buffer effect on the negative impact of Work Interference with Family upon emotional burnout. However, there was no moderating effect of self-efficacy in the relationship between Family Interference with Work (FIW) and emotional burnout. Therefore, it needs to consider a plan to reduce conflicts between work and family according to the causes of conflicts and it also needs to consider relevant results.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.4
• /
• pp.1-12
• /
• 2010

This paper deals with the transmission interval of vehicle data in smart highway where WAVE (Wireless Access for Vehicular Environments) systems have been installed for advanced road infrastructure. The vehicle data could be collected at every second, which is containing location information of the vehicle as well the vehicle speed, RPM, fuel consuming and safety data. The safety data such as DTC code, can be collected through OBD-II. These vehicle data can be used for valuable contents for processing and providing traffic information. In this paper, we propose a model to decide the collection interval of vehicle information in real time environment. This model can change the transmission interval along with special and time-variant traffic condition based on the 32 scenarios using microscopic traffic simulator, VISSIM. We have reviewed the transmission interval, communication transmission quantity and communication interval, tried to confirm about communication possibility and BPS, etc for each scenario. As results, in 2-lane from 1km highway segment, most appropriate transmission interval is 2 times over spatial basic segment considering to communication specification. In the future, if a variety of wireless technologies on the road is introduced, this paper considering not only traffic condition but also wireless network specification will be utilized the high value.

• Korean Journal of Environment and Ecology
• /
• v.29 no.5
• /
• pp.651-680
• /
• 2015

In order to investigate vertical plant distribution on Namdeogyu of Mt. Deogyu National Park by temperature change, vascular plants of nine areas with 100-meter-high difference were surveyed from the Deogsangyo (650m alt.) to the Namdeogyusan (1,507m alt.). A total of 455 taxa belonging to 99 families, 280 genera, 402 species, 5 subspecies, 43 varieties, 4 forms and 1hybrid were vegetated on survey areas. Around 700 m high did species diversity of vascular plants decrease rapidly. The Detrended correspondence analysis (DCA) divided distribution of vascular plants into five groups; areas below 700m alt., 700~1,100m alt., 1,100~1,300m alt., and areas above 1,300m alt.. These results showed that vegetation of vascular plants on investigated areas has high correlation with climate elements of temperature. Vascular plants should be crowded within their own optimal ranges of vegetation. Climate change would result in shift of these distribution ranges, and thus vegetation shift will be happened accordingly.

• Korean Journal of Environment and Ecology
• /
• v.26 no.2
• /
• pp.156-185
• /
• 2012

In order to investigate vertical plant distribution on Osaek valley of Mt. Seorak by temperature change, vascular plants of fourteen areas with 100-meter-high difference were surveyed from the Osaekgyo(345m alt.) to the Daecheongbong(1708m alt.). A total of 449 taxa belonging to 94 families, 279 genera, 397 species, 5 subspecies, 45 varieties, and 2 forma were vegetated on survey areas. Around 500 m high did species diversity of vascular plants decrease rapidly. The Detrended correspondence analysis(DCA) divided distribution of vascular plants into five groups; areas below 500m alt., 500~900m alt., 900~1400m alt., 1,400~1,600m alt., and areas above 1,600m alt.. These results showed that vegetation of vascular plants on investigated areas has high correlation with climate elements of temperature. Vascular plants should be crowded within their own optimal ranges of vegetation. Climate change would result in shift of these distribution ranges, and thus vegetation shift will be happened accordingly.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.49-49
• /
• 2010

용접은 산업계의 기계 조립 및 접합을 위한 공정의 주요한 작업으로 조선, 중공업, 건설 등 산업현장에서 사람에 의한 수동적인 작업으로 대부분 수행된다. 이러한 용접 작업을 수행하는 용접 기술자는 산업 현장 훈련원과 직업 교육 학교에서 양성되지만 용접 훈련 과정은 실습 초보자에게 위험하고, 장시간 교육하기에 어려울 뿐 아니라 재료 낭비, 의사 소통의 한계, 즉석 결과 평가의 한계, 공간부족 등 다양한 문제가 있다. 그러므로, 안전하고 반복적인 실습 환경 제공하고 장시간 및 다수 교육참여 지원 등이 가능한 시스템을 구축하여 숙련된 우수 인력 조기 확보와 훈련 비용을 절감할 필요가 있다. 본 논문에서는 실제와 동일한 상호작용을 제공할 뿐만 아니라 고품질로 훈련 환경을 가시화하여 용접 상황을 동일하게 모사하는 가상 현실 기반 용접 훈련 시뮬레이터를 제시한다. 이 시스템은 용접의 형상과 환경의 고품질 가시화, 경험 DB를 통한 용접의 비드 형상 데이터 획득, 용접 토치를 이용하는 사용자 상호작용, 용접 훈련 결과 평가 및 최적 작업 가이드, 용접 콘텐츠 저작, 다양한 용접 훈련을 가시화하는 하드웨어 플랫폼으로 구성된다. 고품질 가상 용접 가시화는 경험 DB 기반 비드 형상 데이터와 신경회로망을 이용한 비드 형상 예측을 통해 실시간 비드 표현이 이루어지며 쉐이더 기반 고품질 모재 및 비드 표현, 아크 불꽃 효과 표현을 포함한다. 사용자 상호작용은 현장 작업 도구와 일치된 토치 인터페이스와 위치추적을 이용하여 토치의 작업각, 진행각, 속도, 거리 등을 반영할 수 있으며 진동과 소리 등 용접 훈련의 사실적 상호작용도 재현하였다. 용접 훈련 평가 및 최적 작업 가이드는 훈련자의 용접속도, 거리, 각도 등의 사용자 작업 결과를 그래픽으로 표현하고, 애니메이션을 통한 훈련 자세를 추후 분석할 수 있도록 하였고, 가상토치, 기준선, 수치계기 등을 이용한 최적 작업 훈련 가이드 제시하였다. 훈련 콘텐츠 저작은 메뉴UI 기반으로 용접의 전류, 전압 등의 조건과 상황을 선택하도록 제시하였고, 하드웨어 플랫폼은 워크벤치형 입체 디스플레이 방식으로 용접 환경을 가시화하였고, 위, 정면, 아래보기 등 다양한 용접 자세 변경을 지원 할 수 있도록 구축하였다. 이러한 가상현실 기반 훈련 시뮬레이터는 아크열 발생에 따른 장시간 훈련의 어려움을 극복할 수 있고, 다양한 실습 환경을 바꾸어 가며 반복적인 훈련이 가능하고, 실 재료를 사용하지 않아 재료의 낭비를 줄일 수 있는 환경 친화적인 안전하고 효율적인 훈련 실습 환경을 제공할 수 있다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.1
• /
• pp.1-13
• /
• 2001

Due to the friction characteristics of cylinders and the rail of a passenger car, in the elevator actuated with hydraulic systems, there exist dead zones, which can not be controlled by a PID controller. To overcome the drawbacks, in this paper, we first try a hybrid controller which switches between a fuzzy logic controller and a PID controller. However, because the hybrid control scheme uses only a single type controller, except the switched layer, the high control performance can not be achieved. To solve this problem, we propose a new type fuzzy hybrid control scheme, which outputs of the output mixer arc controlled by a fuzzy logic. The hydraulic elevator system controlled by inverters has more then one switched layers due to the highly nonlinear characteristics. The proposed fuzzy hybrid control scheme achieves improved control performances by using both controllers with weighted outputs depend on the system status, to achieve improved control performances. The effectiveness of the proposed control scheme arc shown by simulation results, which the proposed fuzzy hybrid control method yields good control performance not only in the zero crossing speed region but also in the overall control region including steady-state region.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.77-86
• /
• 2008

Traditional cluster-based routing method is a representative method for increasing the energy efficiencies. In these cluster-based routing methods, the selected cluster head collect/aggregate the information and send the aggregated information to the base station. But they have to solve the unnecessary energy dissipation of frequent information exchange between the cluster head and whole member nodes in cluster. In this paper, we minimize the frequency of the information exchange for reducing the unnecessary transmit/receive frequencies as calculate the overlapped area or number of overlapped member nodes between the selected cluster head and previous cluster head in the setup phase. And besides, we consider the direction of super cluster head for optimal cluster formation. So, we propose the modified cluster selection scheme that optimizes the energy dissipation in the setup phase and reuses the saved energy in the steady phase efficiently that prolongs the whole wireless sensor network lifetime by uniformly selecting the cluster head.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1470-1481
• /
• 2008

A demand for spectrum resources, especially in the low frequency bands, is ever increasing with the development of mobile telecommunications and so is their economic value as other national resources. Also, development in mobile broadband require more bandwidth with excellent propagation characteristics, such as those frequencies in the 700/800/900 MHz bands. As a way to enhance the economic efficiency of using spectrum resources, many countries including the U.S., the U.K. and Japan, have recently focused on the refarming plan of the low frequency bands according to the transition from analogue to digital TV. By the way, as a result of WRC-07, those parts of the band $698{\sim}960\;MHz$ in Region 2 and the band $790{\sim}960\;MHz$ in Regions 1 and 3 which are allocated to the mobile service on a primary basis are identified for use by administrations wishing to implement International Mobile Telecommunications (IMT). Therefore, after analogue to digital television switchover, some administrations may decide to use all or parts of the band $698{\sim}806/862\;MHz$ for other services to which the band is allocated on a primary basis, in particular the mobile service for the implementation of IMT, while in other countries the broadcasting service will continue to operate in that band. And to conclude, bands already identified for IMT-2000 will also be able to be used for IMT. This work will help establish a policy direction for spectrum refarming in the low frequency bands in Korea(Rep. of).

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.154-160
• /
• 2006

There wasn't very successful practice cases for the quantity take-off based on the CAD system since the CAD system is used in the construction industry more than 20 years in Korea. It was also not easy to use 3D CAD system in design management and cost management in the construction industry although 3D CAD system is very successful in the manufacturing industry for those areas recently. It is important to construct 3D libraries and to supply those libraries for the designers in time. Architectural work is a kind of creative work. So, Architects like to create their own model. Unlike the manufacturing industry, 3D CAD system can not be survived in the construction industry without new 3D objects supply in the right time. Moreover, the estimation system for 3D must support the schematic design phase, detailed design phase and construction design phase. The product called "Constructor" of Graphisoft consist of modeller, estimator and scheduler based on 3D model. We applied the system to a real project and compared the estimation result and we made a very successful case study.

• The KIPS Transactions:PartD
• /
• v.13D no.7 s.110
• /
• pp.909-922
• /
• 2006

The core assets include all properties which consist of an application in Product Line Engineering. The requirement, one of the core assets, is a basis of other core assets and commonality and variability of other core assets are classified by the requirement. accordingly, commonality and variability of the domain requirement should be managed objectively and it is necessary to make a process to reuse the domain requirements. However the requirement is analyzed by domain experts or developers without proper process. In this paper, we proposed the 4 activities: (1)the domain scoping, (2)the extraction and generalization of the domain requirement, (3)the domain requirement analyzing and modeling, (4)the change management, and sub activities. For all reasons given previously, it is possible to reduce the development time and cost by reusing the architectures and components related to the domain requirement. In addition, it is possible to increase the quality of the artifacts produced based on the requirements by managing them systematically.