• Management & Information Systems Review
• /
• v.35 no.1
• /
• pp.287-305
• /
• 2016

This study confirms that there is a correlation between managers' incentive-compensation system(introduction of the compensation committee) and corporate governance mechanisms (ownership structure, proportion of outside directors, debt ratio, competitive strength), and analyzes whether firm value is affected by corporate governance mechanisms. The purpose of this paper are empirically tested using 318 firm-year data listed on the KRX from 2001 to 2010 and 2SLS(two-stage least square method) were used for the analysis of the hypotheses. The results of empirical tests are as follows. Firstly, there is no correlation between introduction of the compensation committee and corporate governance mechanisms. In addition, the results show that there is a causal relationship between some variables. Secondly, results from the analysis of the impact of corporate governance mechanisms on firm value, only introduction of the compensation committee and foreign investors ownership were analyzed as a positive impact on the firm value. This result means that most domestic firm don't actively used for managers' incentive-compensation system as a useful control device for improving corporate governance.

• Journal of Advanced Navigation Technology
• /
• v.18 no.5
• /
• pp.455-460
• /
• 2014

The system performance is analized for the optimal design of the transmission links with dispersion management and optical phase conjugation for compensating for the optical signal distortion due to the group velocity dispersion and optical nonlinear Kerr effects in the long-haul optical transmission system. That is, the effect of the relation of the residual dispersion in both half transmission sections with respect with optical phase conjugator (OPC) on the net residual dispersion (NRD) is assessed. It is conformed that the best compensation is obtained in NRD of 10 ps/nm, which is only controlled by the difference of the residual dispersion between each half transmission sections.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.3
• /
• pp.154-161
• /
• 2005

This paper proposes a speed-sensorless induction motor control system using a rotor speed compensation. To explain the proposed system, this paper describes an induction motor model in the synchronous reference frame for the vector control. The rotor flux is estimated by the rotor flux observer using the reduced-dimensional state estimator technique. The estimated rotor speed is directly obtained from the electrical frequency, the slip frequency, and the rotor speed compensation with the estimated q-axis rotor flux. The error of the rotor time constant is indirectly reflected in the rotor speed compensation using the compensation of the flux error angle. To precisely estimate the rotor flux, the actual value of the stator resistance, whose actual variation is reflected, is derived. An implementation of pulse-width modulation (PWM) pulses using an effective space vector modulation (SVM) is briefly mentioned. For fast calculation and improved performance of the proposed algorithm, all control functions are implemented in software using a digital signal processor (DSP) with its environmental circuits. Also, it is shown through experimental results that the proposed system gives good performance for the speed-sensorless induction motor control.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.128-139
• /
• 1999

This paper proposes a linearization technique for the space vector modulation method, which increases the linear control range of inverter up to the 6-step inverter. This method is based on fourier series expansion of the desired output voltage of the inverter to calculate the compensation angle in continuous switching mode and holding angle in discontinuous switching including the 6-step mode respectively. The approximation equation of these angles are used for compensation of fundamental voltage in overmodulation range. Therefore, it is possible to obtain the linear control and the maximized utilization of PWM inverter output voltage.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.655-658
• /
• 2012

Optimal net residual dispersion (NRD) and distribution pattern of (SMF) length and residual dispersion per span (RDPS) in optical transmission links with artificial distribution of SMF length and RDPS required to flexibly design of optical links in dispersion management (DM) technique for compensating the distorted 960 Gbps optical signals due to interaction of group velocoty dispersion (GVD) and optical nonlinear effects are induced.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.638-641
• /
• 2012

Optimal net residual dispersion (NRD) and effective launching power range of optical transmission links with random distribution of single mode fiber (SMF) length and residual dispersion per span (RDPS) required to flexibly design of optical links in dispersion management (DM) technique for compensating the distorted 960 Gbps optical signals due to interaction of group velocoty dispersion (GVD) and optical nonlinear effects are induced.

• Journal of Broadcast Engineering
• /
• v.7 no.4
• /
• pp.317-326
• /
• 2002

The adaptive coding schemes in H.264 standardization provide a significant ceding efficiency and some additional features like error resilience and network friendliness. The variable block size motion compensation using multiple reference frames is one of the key H.264 coding elements to provide main performance gain, but also the main culprit that increases the overall computational complexity. For this reason, this paper proposes a selective motion estimation algorithm based on variable block size for fast motion estimation in H.264. After we find the SAD(Sum of Absolute Difference) at initial points using diamond search, we decide whether to perform additional motion search in each block. Simulation results show that the proposed method is five times faster than the conventional full search in case of search range $\pm$32.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.11
• /
• pp.1198-1206
• /
• 2003

In this paper, a MMIC waveguide mixer module based upon the novel suggested mode converter for wave-guide-to-microstrip transition was fabricated and measured. The insertion and return losses of the mode converter was optimized by compensating the discontinuity effect between ridge and microstrip with the modification of 50 $\Omega$ microstrip line pattern. Due to the low loss nature of the mode converter, a millimeter wave MMIC mixer chip can be successfully applied as a waveguide module for mmW waveguide communication system. The measured results of the module showed the successful MMIC chip application in waveguide and the negligible degradation of the supplied chip specification.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1047-1056
• /
• 2007

Basically, an ultrasonic imaging system has two fundamental imaging modes available. One is the B-mode imaging modality which provides an image of reflection coefficient, and the other is the Doppler color flow mode that maps blood flow inside the human heart and blood vessels. This paper presents a new method of detecting and compensating for aliasing that occurs when the Doppler frequency exceeds one-half of the pulse-repetition frequency (PRF). Its validity is shown by computer simulation. The new method not only extends the measurable Doppler frequency, but also helps to reduce the effect of noise. The results show that the aliasing can be compensated for correctly fur signal-to-noise ratios down to 20 dB.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.6
• /
• pp.41-48
• /
• 1995

In field oriented control of Induction motors, speed sensor is required, which reduces the sturdiness of drive system and together with the expenditure of hardware for faultless transmission and processing of sensor signals it causes considerable expenses. These expensive sensors can be replaced by speed sensorless concept. And for good control, the knowledge of the rotor flux component or the rotor resistance are needs. Thus, this paper is based on a Extended Kalman Filter (EKF) that estimates the state variables that are required for the control by only measuring the line voltages and currents of the machine. the rotor time constant and speed estimated by the EKF show satisfactory agreement with the real values, with the simulation approaches.