• Journal of Energy Engineering
• /
• v.4 no.3
• /
• pp.402-406
• /
• 1995

다리우스 풍력터빈의 속도설정을 터빈이 만드는 토크와 발전기가 요구하는 토크의 \평형을 통해 찾아 낼 수 있음을 검토하였다. 풍속에 따른 속도-토크곡선에서 일정충력곡선이 만나는 점이 터빈의 동작점으로 되며 이는 안정 및 불안정이 될 수도 있다. 풍속과 출력이 각각 변할 때 이 동작점이 어떻게 이동되는가 하는 점을 제시하였다. 또한 터빈의 속도에 관한 제어 블록선도를 제시하여 그 출력변화에 따른 속도변화의 전달함수를 알아내고 이의 형태는 1차 시지연 함수로 유도된다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.6
• /
• pp.602-611
• /
• 2004

Servo system has commonly adapted PI controller with fixed gains, because of its simplicity and determinative relationship among the parameters. The fixed gains PI system may be applied well to some operation conditions, but not non-linearities, complex and time variant operation conditions. For solving these problems, another conventional method, 'variable gun schedule according to speed', is published. The value of gain is determined according to the absolute value of the mover real speed. In this paper, FSTPIC(Fuzzy Self-Tuning PI Controller) is proposed based on various experiences to rapidly reduce speed error and to secure a good speed response characteristics. The effectiveness of proposed algorithms is demonstrated by comparing to two conventional gain systems via 4-quadrant operation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.6
• /
• pp.517-523
• /
• 2002

A sensorless control of a PM synchronous motor with the compensation of the motor parameter variation is presented. The rotor position is estimated by using the d-axis and q-axis current errors between the real system and motor model of the position estimator. The stator resistance is measured at low speeds when the motor changes its rotating direction and the variation of the stator resistance and back emf constant caused by the temperature variation is compensated. The gains in the position estimator are also adapted according to the motor speeds.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.271-276
• /
• 1994

본 연구에서는 외부 호스, 내부 충진유 및 탄성체 핵으로 구성된 다층 재질의 무한히 긴 원통형 실린더가 자유 흐름 중에 있을 때, 유체 유동에 의한 난류 경계층내 벽면 압력 변동(wall pressure fluctuation)이 내부 탄성체 핵의 표면에 미치는 영향을 분석하기 위하여 난류 경계층에 의한 다층 재질의 실린더 내부 압력 변동 해석 이론을 정립하였다. 본 해석 이론에서는 파동 방정식을 이용하여 외부 호스 벽면 압력에 대한 전달 함수를 도출하고, 난류 경계층내 벽면 압력 변동은 Corcos Model을 기초로 하여 Strawderman이 제안한 실험식을 사용하여 추정하였다. 또 이를 바탕으로 자유 흐름 속도 변화등에 따른 실린더 내부 압력변도의 변화를 분석하여 보았다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.33-37
• /
• 2010

본 연구는 암거흐름 8형식 중 Class-II군 즉, 암거 유입부가 잠수된 조건하에서 저류지 방류암거의 흐름 특성을 분석한 것으로서 유입부 수위가 저류지의 제방고를 넘지 않는 범위에서 저류지 방류암거 설계인자들의 관계를 분석하여 설계범위를 결정해 본 결과 암거의 직경과 유출부 초기수위의 변동은 유입부 수위의 변동에 큰 영향을 주었으며, 상대적으로 암거의 경사와 연장은 그 영향이 미미하였다. 또한 암거 흐름분류가 Class-II군 Type-2에 속하는 경우에는 암거 직경이 일정하여도 유입부의 수위가 변동되지 않으면서 적정 유출량을 방류시킬 수 있었으며, 암거 흐름분류가 Class-II군Type-3에 속하는 경우에는 유출부 수위변화에 따라 암거직경변화가 크게 나타났다.

• Journal of Life Science
• /
• v.8 no.5
• /
• pp.557-562
• /
• 1998

This study was conducted to investigate the influence of soil moisture on the photosynthetic rate, transpiration rate, stomatal conductance, leaf water content and its any correlation in soybean. Followings were achieved as a conclusion. At the soil moisture was moved from drought condition to saturation condition, the photosynthetic rate, transpiration rate, stomatal conductance and leaf water content were gradually increased on the period of re-watering treatment. The recovery of photosynthetic rate was faster than others. There were positive correlation with the photosynthetic rate and leaf water content, the stomatal conductance and leaf water content, the photosynthetic rate and stomatal conductance respectively, but the correlation coefficient of photosynthetic rate and leaf water content was high.

• Journal of Wetlands Research
• /
• v.9 no.3
• /
• pp.51-61
• /
• 2007

In natural river, river-bed change is greatly influenced by the various factors such as river improvement, change of watershed land use, construction of dam and reservoir, gravel mining, and so on. The knowledge about river-bed change in the river is essential in the river modification, wetlands plan, and maintaining stable alluvial rivers. In this study, river-bed change in the future was predicted by investigating river channel characteristics which play dominant role in the formation of channel and based on the numerical model through river survey and the grain size analysis. The Proposed investigation and model was applied to the Geum river and the Miho stream which have been experienced river degradation due to river aggregate dredging and now seams to be stable. The result of potential river-bed change which was estimated by investigating channel characteristic including slope of channel, friction velocity, and so on is similar to that which was estimated based on the numerical model. It was found that the Geum river and the Miho stream will be stable. In the future, if considering the characteristics of river channel which is estimated by the river-bed scour, sediment, and so on, it is possible that river improvement and wetland restoration plan are established stably and naturally.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.1
• /
• pp.150-156
• /
• 2001

This paper proposed a speed estimator using MRAC(Model Reference Adaptive Control) for sensorless vector control. It is robust for parameter variation or disturbance and the estimated speed is used as feedback in a vector control system. Experiment is presented to confirm the theoretical analysis.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.15-18
• /
• 2004

본 논문에서는 표면 부착형 영구자석형 동기 전동기(SPMSM)의 가감속과 부하 변동에 따른 속도 특성 향상을 위해 실제 속도와 부하 토크 관측기를 통한 부하 토크를 입력 변수로 설정하여 가변 이득 조절 알고리즘을 제안한다. 제안된 알고리즘을 증명하기 위해 여러 운전 조건에서 기존의 이득 시스템과 가변 이득 조절 시스템을 비교하여 제안된 알고리즘의 효용성을 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.87-88
• /
• 2012

본 논문에서는 영구자석 동기전동기 구동 시 제정수 변동에 의한 전압변동 분을 옵저버를 이용하여 추정하고, 이를 이용하여 변동된 제정수를 추정하여 실시간 제어 알고리즘에 적용할 수 있는 기법을 제안한다.