• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.392-393
• /
• 2019

본 논문에서는 전기 보트 추진을 위한 SPMSM(Surface mounted Permanent Magnet Synchronous Motor) 구동 시스템을 개발하였다. 전차원 폐루프 관측기를 이용하여 외란 토크 관측기를 구성하고, 관측된 외란 성분을 속도 제어기 출력에 보상하여 속도 제어 성능을 향상시켰다. 리튬이온 배터리, 인버터 및 1kW SPMSM으로 구성된 전기 보트 추진 시스템을 이용한 구동 실험을 통해 추진용 전동기의 속도 제어 특성을 확인하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.5
• /
• pp.459-466
• /
• 2000

A new control method for precision robust speed control of a PMSM(Permanent Magnet Synchronous Motor) using load torque observer is presented. Using this system, we can more precisely evacuate of vestibular function. Until now a rotating chair system, so called 2D-stimulator, which has vertical rotate axis is used to make dizziness. However, an inclined rotating chair system witch is called 3D-stimulator is needed to obtain the precise dizziness data. This 3D-stimulator include unbalanced load caused by unbalanced center of mass. In this case, new compensation method is considered to obtain robust speed control using load torque observer. To reduce the effect of this disturbance, we can use dead-beat observer that has high gain. The application of the load to torque observer is published in for position control. However, there is a problem of using speed information such as amplifying effect of noise. Therefore, we can reduce a noise effect by moving average process. The experimental results are depicted in this paper to show the effect of this proposed algorithm.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.1
• /
• pp.7-14
• /
• 2015

To implement an automatic picking system (APS) in distribution center with high precision and high dynamics, this paper presents a high gain observer-based robust speed controller design for a linear induction motor (LIM) drive. The force disturbance as well as the mechanical parameter variations such as the mass and friction coefficient gives a direct influence on the speed control performance of APS. To guarantee a robust control performance, the system uncertainty caused by the force disturbance and mechanical parameter variations is estimated through a high gain disturbance observer and compensated by a feedforward manner. While a time-varying disturbance due to the mass variation can not be effectively compensated by using the conventional disturbance observer, the proposed scheme shows a robust performance in the presence of such uncertainty. A Simulink library has been developed for the LIM model from the state equation. Through comparative simulations based on Matlab - Simulink, it is proved that the proposed scheme has a robust control nature and is most suitable for APS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.4
• /
• pp.627-634
• /
• 1998

This paper proposes an algorithm which improves capacity of a state observer and low speed driving characteristics of a induction motor by inertia moment identification. In induction motet driving systems, it is difficult to obtain the accurate speed information by a low resolution encoder because the encoder pulses are very few in a low speed range. To improve this problem, state observer based on the Gopinath' theory which estimates speed and disturbance was designed, and disturbance rejection control was realized by application of the observer. Also, inertia moment of the motor was estimated and the nominal inertia of the observer was identified to minimize the error of estimated speed and disturbance. From the simulation and experimental results, it is showed that the proposed observer improved the transient response characteristics in low speed region below 6［rpm］.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1354-1360
• /
• 2001

Calculated velocity distribution was used to visual information by image that is obtained from camera. The visual velocity of object that is obtained from this visual information were fused and experimented. That is, need motion of eye that motion of head that happen by external disturbance or move of camera itself to get stable image in environment that receive external disturbance can be compensated. In this treatise, algorithm that control gaze which vision and sense of equilibrium are fused in environment with external disturbance proposed, and thing that compare with that it controls gaze only that control gaze which vision and sense of equilibrium are fused in the experiment result and position deflection is few confirmed. This was because action of camera prop is effect that record conclusion error of the speed because the appearance speed is decreased being compensated by angular velocity sensor.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.976-977
• /
• 2006

선형전동기와 같은 선형운동을 하는 기기에서 원형운동을 하는 경우 속도가 0 이되는 부분에서 비선형적인 마찰력이 작용하며 이로 인한 운동괘적의 외곡 현상이 발생한다. 본 연구에서는 이러한 마찰력을 비롯한 모든 외란을 하나의 비선형적인 외란으로 간주하여 실용적으로 사용할 수 있는 간단한 형태의 외란 관측기를 제시한다. 또한 모든 외란 관측기에서 피할수 없는 문제의 하나인 전동기 관성(모멘트)의 변동 문제를 해결하기 위하여 제한적이지만 매우 효과적으로 관성을 추정해낼 수 있는 새로운 방법을 제안한다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.1
• /
• pp.134-140
• /
• 1998

포항제철 2열연공장의 사상압연에 사용되고 있는 DC 모터를 가지는 열간압연 구동기에 대한 견실 H/sup .inf./ 속도제어기 설계방법을 제안한다. 기존에는 PI 재어기법을 이용하여 속도를 제어하고 있으므로 불확실성과 외란등이 존재할 경우 양호한 제어 성능을 얻기 힘들다. 이를 해결하기 위해 주파수 하중 함수를 가지는 혼합감도최소화 문제를 설정하여 견실성을 보장하는 H/sup .inf./ 속도제어기를 설계한다. 이때 주파수 하중함수는 루프쉐이핑기법을 이용하여 주어진 구동기 플랜트에 적합하도록 선택한다. H/sup .inf./ 속도제어기 설계는 Pasek이 제시한 DC 모터의 모델링 방법에 의해 얻어진 모델을 포함하는 구동기 모델에서 속도제어기 부분을 제외한 모델을 대상으로 한다. 제안한 견실 속도제어기 설계방법은 파라미터 변화나 부하토크 변동 등의 외란에 대하여 폐루프 시스템의 견실안정성과 원하는 속도에 좋은 추적 성능을 보인다. 제어 대상인 포항제철 2열연공장의 열간압연 구동기에 대한 시뮬레이션을 통해 기준속도 추적성, 응답속도, 불확실성과 외란에 대한 견실성 등의 성능에 기존의 PI 속도제어기보다 양호함을 확인함으로써 제안한 견실 H/sup .inf./ 속도제어기 설계 방법의 타당성을 보인다.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.523-524
• /
• 2016

본 논문에서는 자기저항 (Magnetic Resistive, MR)각도 센서에서 자속 간섭 및 축 진동과 같은 외란에 의해 발생하는 각도맥동을 해결하는 방법이 연구되었다. 외란에 의한 각도 맥동은 일정한 기계각 속도 한 주기 내에서 전기각 속도가 불균일하게 측정되는 현상이다. 이를 해결하기 위해 위상동기루프 (phase locked loop, PLL)를 적용하였고, 자기저항 각도 센서의 각도 맥동을 효과적으로 제거하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.4
• /
• pp.366-374
• /
• 2003

In electric motor coaches, the rolling stocks move by the adhesive effort between rail and driving wheel. Generally, the adhesive effort is defined by the function of both the weight of electric motor coach and the adhesive effort between rails and driving wheel. The characteristics of adhesive effort is strongly affected by the conditions between rails and driving wheel. When the adhesive effort decreases suddenly, the electric motor coach has slip phenomena. This paper proposes a re-adhesion control algorithm which uses the maximum adhesive effort by instantaneous estimation of adhesion force using load torque disturbance observer. Based on this estimated adhesive effort, the re-adhesion control Is peformed to obtain the maximum transfer of the tractive effort.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.58-66
• /
• 2009

In this paper, vector control to applied disturbance offset feedforward loop control for changing disturbances with various mechanical parameter is suggested. The proposed system estimate load torque based on induction motor torque using minimum diemension state observer. Because speed controller using state observer is used on condition of feedforward loop fur a torque, the robust speed control system realized. In this study, the proposed paper does to heighten reliability of system by presuming and use the speed by voltage and current that is detected without speed sensor. To prove the propriety of this paper, the various simulation carried out adequacy using a Matlab Simulink, and at the same time real system is made, using a ADMC300 digital signal processor, so it is proved. As the experimental result of embodying the system, the robust system is realized.