• Korean Journal of Agricultural Science
• /
• v.21 no.1
• /
• pp.60-66
• /
• 1994

Among the various bacterial isolates from municipal sewages which utilized linear alkylbenzene sulfonate (LAS) as a sole source of carbon. 3 potent strains - KL-3, SH-2 and EN-1 - were selected. The strains were classified: KL-3 as a strain belong to the genus Klebsiella; SH-2 Shigella; and EN-1 Enterobacter, respectively. They were grown in a broth containing 200 ppm of LAS, using a laboratory scale fermentor: the bacterial growth reached stationary phase after 2 days with a maximum viability of $10^8cfu/mL$ of the culture; initial rates of LAS degradation were high during the first 24 hours of cultivation (KL-3 and SH-2, approx. 50%; EN-1, 20%); after 1 day a lag period of about 24 hours was observed for all the strains, and thereafter break-down proceeded rapidly; final rates after 7 days were approximately 85% by KL-3, 82% by SH-2 and 75% by EN-1. Adsorption of LAS by the bacterial cell mass was high for the strain SH-2, as Freundlich equation: Y= 0.030X + 0.95 was calculated.

• Korean journal of applied entomology
• /
• v.54 no.4
• /
• pp.303-310
• /
• 2015

The diamondback moth, Plutella xylostella, overwinters in some protected areas in Korea. Using a sex pheromone trap, the adults were monitored since the occurrence of the overwintering populations. In Andong, P. xylostella exhibited four adult peaks in a year. Biological characters, such as cold tolerance, insecticide susceptibility, and developmental rate, were analyzed and showed a significant variation among different local overwintering populations. Population genetic variation was assessed with molecular markers, in which the initial high genetic variation among the overwintering populations decreased with the progress of seasons. These results suggests that there may be a significant migration of P. xylostella to decrease the genetic variation among the different local populations that are different in biological characters.

• The Korean Journal of Mycology
• /
• v.26 no.1 s.84
• /
• pp.91-96
• /
• 1998

Optimal conditions for the preservation of mushroom cultures in sterile distilled water were investigated. Mycelial disks from 12 mushroom cultures were preserved at room temperature, $5^{\circ}C,\;-20^{\circ}C$ and $-75^{\circ}C$ using sterile water and 6 cryoprotectants for 12 months. The maximal viability of mycelial disks was observed at room temperature and $5^{\circ}C$ with the value of 91.7%. At $-75^{\circ}C$, the viability was highest in polyethylene glycol (PEG) and lowest in 10% dimethyl sulfoxide (DMSO). The average mycelial growth was highest for disks preserved at $-75^{\circ}C$ in PEG. PEG was the most suitable for the preservation at $-75^{\circ}C$, although this chemical has rarely been used as a cryoprotectant in fungal culture preservation. The laccase isozyme patterns of the preserved isolate of H. ferrugineum were not changed during preservation at $5^{\circ}C$ in sterile distilled water as compared to that of slant culture.

• Applied Biological Chemistry
• /
• v.40 no.5
• /
• pp.395-399
• /
• 1997

Lintnerization properties and yield of enzyme-resistant starch in maize starches with different amylose content were investigated. Hydrolytic patterns of starches showed two distinct stages. With decreasing the amylose content, hydrolysis extents of starch increased. X-ray diffraction patterns of Amloca, PFP and commercial maize starch were the A crystalline type, and those of Amaizo 5 and Amylomaize VII were the B crystalline type. As acid hydrolysis time increased, the relative crystallinity of starches increased. After heating-cooling treatment was repeated up to 4 times, the yield of RS increased with increasing the amylose content. The yields of RS in lintnerzed maize starches decreased with acid treatment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1581-1588
• /
• 2011

In this study, flow characteristics in a multi-cavity injection molding process were investigated. One of main problems occurred in the multi-cavity molding is a flow imbalance among cavities since it affects physical properties and quality of products. Charge imbalance is caused by the uneven shear stress. Therefore, changes in viscosity affect the physical properties of resin and injection conditions differ in the filling imbalance phenomenon. Through, this study focus on experimental studies of flow imbalance for PC and PP resin occurring in a balanced delivery system. Experimental results were compared with CAE results. By experimental and CAE analysis, main cause for the flow imbalance is temperature distribution in cross section of runner. New runner system with a simple change of runner shape was suggested to avoid the flow imbalance. A series of simulation to confirm feasibility of Volume Runner's effects was conducted using injection molding CAE.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.587-587
• /
• 2012

현재 대부분 하천관리의 흐름해석에서 주가 되었던 1차원 분석은 하천 단면에 따른 횡적인 수면차, 유속분포를 분석할 수 없다는 단점을 가지고 있으며, 특히 유량 및 유속이 급속도로 늘어나는 홍수시에는 그 오차가 더욱 커질 수 있다. 반면에 2차원 모형의 흐름해석은 사행하천의 흐름 특성과 만곡부에서의 종 횡방향 수면경사 및 양안의 수면차와 합류지점의 횡방향 흐름 등의 영향을 고려할 수 있으며 1차원 해석과는 달리 전 단면에 걸쳐 유속 및 수위 분포를 나타낼 수 있어 실제흐름에 가까운 수리량을 얻을 수 있다. 본 연구를 위해 적용된 해석모형인 SMS는 미국 Brigham Young 대학의 환경모형연구실과 미공병단(USACE)의 수로실험국(WES) 등에서 개발한 프로그램으로서 RMA2, RMA4, SED2D 모형 등으로 구성되어 있다. 각각의 모형은 수리 동역학적 해석, 오염물 이송확산 해석, 유사의 이송 및 퇴적 해석이 가능하며 이 중 RMA2를 이용한 2차원 흐름해석을 통하여 보다 적합한 하천관리에 이용가능하도록 하고자 한다. 연구대상 지역은 제주도 한천 하류부로서 제주도 하천 특성상 평상시 건천의 상태를 이루고 있으나 태풍 및 집중호우시 홍수유출이 발생하여 수위가 급격하게 상승하는 양상을 보인다. 대표적인 예로 태풍 '나리'시 최대 일강우량 420mm로 인한 인근 지역에 0.5 ~ 1.5m의 침수흔적을 보이고 있다. 본 연구에서는 2011년 최고수위를 기록한 태풍 '무이파'를 대상으로 하였으며 대상지역의 Kalesto를 이용한 수위-유속 자료를 이용하여 산출된 유량을 경계조건으로 사용하였고 격자망 형성을 위한 지형 데이터는 지형도 및 측량자료를 이용하여 구축하였다. 사용된 대표적인 매개변수는 하상의 조도계수를 나타내는 Manning의 n값과 유체의 밀도, 속도구배, 구조 등 여러 가지의 유체조건에 따라 변하는 성질인 와점성계수(eddy viscosity)로 요약할 수 있으며 Manning의 n값은 하천설계기준에 따른 하천기본계획의 조도계수를 사용하였고 와점성계수는 적합한 흐름 분포를 결정하기 위해 흐름이 안정될 때까지 변화시켜 해석을 시행하였다. 해석결과 만곡부에서는 급한 흐름을 보이고 있으며 최대하폭 구간에서는 완만한 흐름이 나타나 사행하천의 흐름특성과 횡적인 하천단면에 따른 변화, 하상고 차이로 인한 유속분포를 확인할 수 있으며 이는 보다 유용한 하천관리에 이용가능할 것으로 사료된다.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.667-673
• /
• 1998

Rebar corrosion in a simulated pore solution (SPS) with chloride ion was analyzed by Tafel and AC impedance method and corrosion effects of surface roughness and iron oxide layer were also investigated. Corrosion estimation of rebar by electrochemical impedance spectroscopy is very useful, and the measured value can be adapted to proposed electrochemical equivalent circuit model. Corrosion potential increased to the cathodic direction as the concentration of chloride ions increased and corrosion current had the same tendency as above. Surface films were analyzed with scanning electron microscope and Auger electron spectroscopy. Thermally oxidized layer by torch flame for 15 sec was very poor at anti-corrosive property. The corrosion rate of rebar increased as the surface roughness increased. Also, higher temperatures above RT of SPS in initial stage caused a rebar to be corroded faster.

• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1326-1330
• /
• 2000

Kimchi, made from seasonal baechu (Chinese cabbage), was sealed in PP trays with a Nylon/CPP lid film and stored at various temperatures (0, 10, $20^{\circ}C$) to investigate the feasibility of detecting its fermentation degree by measuring gas composition inside the packages. The gas composition inside the kimchi package continuously changed due to $CO_2$ evolution during fermentation. Regardless of temperature, the fermentative gas accumulation in the package caused $CO_2$ concentration to increase by two-stepwise pattern, but $O_2$ concentration to decrease exponentially. As $CO_2$ concentration increased secondarily, the pH values of kimchi decreased proportionally (r>0.968). The production of $CO_2$ during kimchi fermentation was stimulated at higher temperatures and affected by seasonal factor. Kimchi made from winter baechu produced more fermentative gas than that from summer baechu. It was suggested that the changes in $CO_2$ concentration could be used as a characteristic index for indicating the fermentation course of packaged kimchi products.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.5
• /
• pp.587-594
• /
• 2019

This study experimentally investigated the effects of high and low densities of vegetation patches on the flow characteristics in a stream-scale outdoor experimental channel with rooted willows. Stream-scale experiments on vegetated flows were carried out for an emergent condition of vegetation. Vegetation patches were arranged by alternate bar formation and the flows in vegetated and non-vegetated sections were compared. Three-dimensional flow structure was measured by ADV (Acoustic Doppler Velocimeter) and the vertical distributions of longitudinal velocity were mainly analyzed from the measurements at various points. Flow velocities show different patterns depending on the density of vegetation patches. The difference in flow velocity between in the vegetated and non-vegetated sections appear to large in the dense patches and the flow becomes complicated at the downstream edge of the patch. Despite the upstream flow disturbed by the first patch, the flows over the second patch show the similar pattern.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.6
• /
• pp.1-8
• /
• 2021

The performance of hidden camera cameras is improving day by day due to miniaturization and advanced technology integration according to the speed of technological development of smartphones. As this external networking computing environment is advanced and diversified, exposure to hidden cameras in addition to general safety cameras is also increasing. On the other hand, the technology for detecting and preventing hidden cameras is not keeping up with the development and speed of these hidden cameras. Therefore, in this study, the heat of the hidden camera was detected using infrared thermal detection technology based on general image and thermal image synthesis technology, and the reflectance of each wavelength according to the difference in ambient temperature was analyzed to reduce the false positive rate.