• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.5
• /
• pp.407-415
• /
• 2021

The performance of satellite parts must be verified under the space orbit environment before the launch. This paper develops a model formula considering the thermal environment such as conduction, radiation, heat loss and internal heating between satellite parts and a small thermal vacuum chamber for thermal vacuum tests. System identification is carried out using test data from 20 recent thermal vacuum tests conducted by the Korea Aerospace Research Institute. It is verified that the model formula and the identification results are valid, except when the heating of the functional test of the test specimen is not constant.

• Journal of Astronomy and Space Sciences
• /
• v.13 no.2
• /
• pp.41-51
• /
• 1996

KITSAT-1 and 2 are microsatellites weighting 50kg and all the on-board data are processed by the on-board computer system. Hence, these on-board computers require to be highly reliable and be designed with tight power consumption, mass and size constraints. On-board computer(OBC) systems for KITSAT-1 and 2 are also designed with a simple flexible hardware for reliability and software takes more responsibility than hardware. KITSAT-1 and 2 on-board computer system consist of OBC 186 as the primary OBC and OBC80 as its backup. OBC186 runs spacecraft operating system (SCOS) which has real-time multi-tasking capability. Since their launch, OBC186 and OBC80 have been operating successfully until today. In this paper, we describe the development of OBC186 hardware and software and analyze its in-orbit operation performance.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.8
• /
• pp.767-773
• /
• 2010

This paper describes development of a non-explosive separation device which can be equipped on small satellites. The spur geared micro DC motor, which has high reliability and advantage of price, is adopted as an actuator. The proposed separation device has resettability and it does not need extra jig to reload. In addition, the simple structure makes it easy to fabricate and assemble. To verify the performance of the proposed device, the response time tests, maximum preload tests and maximum shock level tests were performed. Also, through the vibration tests and thermal vacuum tests, feasibility of the proposed separation device was shown in launching and space environments. Therefore, we expect that the proposed separation device can replace the imported separation devices in near future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.5
• /
• pp.487-494
• /
• 2019

A Small-Sat Power System Design and Development should be depend on space environment such as solar wind with Electromagnetic field by hurdle of techniques. It is surmount solution of trend that will unitize and converge with power module in these days. The level of modularize means that applying Universal Middleware for payload power module requirements. The scope of target system is a main power provider module and operational subunit that can be implemented with the final power module distribution loads to consume for continuous process. A Universal Middleware strengthen to build power module from satellite power system should be accuracy and consuming data. A Power Service Module and dynamic system drive interactive management between power distribution and consumer module by Range Control. Consequently, suggesting evaluation, unexpecting payload system power consumer that makes fine variable resources in the development design process and efficiency.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.33-37
• /
• 1993

연결부를 지닌 대형의 노즐형상 제품은 대형산업기기에서 용기의 일부 및 추진체 및 인공위성 발사 대등에서 쓰이는 제품으로 목적하고자 하는 최종 조립품의크기에 따라 제품자체의 지름이 1m 에서 수m 에 이르는 대형으로 제작된다. 대형노즐형 제품은 제품 자체의 강도, 정확한 치수 및 소요재료의 다수등도 중요한 요소이나, 가공하중의 크기에 따라 다르지만 제품을 만들기 위해서는 수만톤을 필요로하기 때문에 제품제조의 가능여부가 성형기의 능력에 의존하게 된다. 본 연구는 비교적 소형장비로써 대형 노즐형단조 품의 제작이 가능한 새로운 성형공정을 개발하는데 그 목적이 있으며 공정개발은 비교적 소형 장비로써 대형단조품의 제작이 가능하도록 하는데 촛점을 맞추고서 이루어 졌다. 이를 위해 여러가지 가능한 방법 들을 제안하고, 각각의 공정 방법들에 대해서 Plasticine 모델 시험을 통하여 소성유동에 의한 성형성과 하중을 검토한 후에 국내에서 사용가능한 장비 및 하중능력, 그리고 성형성 등을 고려하여 적절한 공정방법을 선택하였다. 선택된 공정에서 점진적 팽창단조를 위한 예비 성형체의 결정 및 공정변수의 결정등을 납 모델링실험을 행하여하였으며 실재 재료의 축소모형실험을 수행하여 공정을 확인 하였다.

• Korean Journal of Remote Sensing
• /
• v.28 no.5
• /
• pp.521-529
• /
• 2012

The evapotranspiration (ET) is one of the most important factor in the hydrological cycle. In this study, remote sensing based ET algorithm using Moderate Resolution Imaging Spectroradiometer (MODIS) was considered. Then, Priestley-Taylor algorithm was used for estimation of potential evapotranspiration in South Korea, and its spatial distribution was analyzed. Overall applicability between estimated potential evapotranspiration and weather station pan evaporation in Nakdong river basin was represented. The results using small pan showed that correlation coefficient in Pohang and Moonkyung Station was 0.70 and 0.55, respectively. However, the results using large pan showed correlation coefficient in Pohang and Moonkyung Station was 0.62 and 0.52, respectively.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.446-451
• /
• 2004

Over testing problems of satellites and theirs components have been issued due to their effects on satellite development cost and schedule. Force limited vibration tests were introduced as solution of the problems in 1980s. Over testing phenomena occurs due to the lack of similarity on interface impedance. Force limited vibration tests control interface force to simulate actual interface impedance. In this research, force limited vibration tests are applied on two satellites environmental tests. Force limits are calculated by using TDFS method and Semi-Empirical method. Four force sensors are employed to control interface force. The tests prove that force limited control reduced maximum interface acceleration in order of 3.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.391-396
• /
• 2004

Spaceborne earth observation or astronomical payloads often use Cassegrain-type telescopes due to the limits in mass and volume. Precision optical alignment of such a telescope is vital to the success of the mission. This paper describes the simulated optical alignment methods using interferograms, wavefront error, and reverse-optimization method for different levels of alignment accuracy. It concludes with the alignment experiment results of a Cassegrain type spaceborne camera with 300mm entrance pupil diameter.

• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.409-414
• /
• 2018

Extrapolating the correction information of ionosphere is essential for expanding wide area differential GPS (WADGPS) service area beyond the reference station network. In this paper, design and analysis of the artificial neural network for expanding the ionospheric correction region will be proposed. First, analysis about influence of each input of neural network were performed. The inputs are the day/year periodic function, sunspot number, and geomagnetic index (Ap). Second, performance analysis with respect to the number of hidden layers and neurons in the neural network is shown. As a result, estimation of total electron contents (TEC) on the high/low latitude regions in solar max(2014) are displayed.

• The Korean Journal of Air & Space Law and Policy
• /
• v.24 no.2
• /
• pp.163-186
• /
• 2009

The missile technology and its development in south Korea have been restrained to the limit of 180 km by America which instead provided to Korea with security protection. In the same vein, America pressured South Korea to abort its nuclear weapons program so as to prevent another possible military encounter that can easily develop into a war between South and North Korea. This restraint was a bit relaxed when South Korea joined the Missile Technology Control Regime (MTCR) in 2001 whereby the limit was 300 km. The situation of South Korea is in much contrast with its neighbor, North Korea, which has fired Taepo Dong 1 and Taepo Dong 2 to put its alleged satellite respectively into the Earth orbit. The range of this rocket believed to be reaching more than 5,500 km, a range of the intercontinental ballistic missile, without any rein. South Korea that has just geared its full powers for its outer space industry, with the current space projects of putting its satellites into the low Earth orbit, will in future put its satellite into the geostationary orbit, 36,000 km above the Earth. To do so, such restraint had better be resolved. Korean space industry, as it is alike in other countries, started with putting and manufacturing sounding rockets, producing satellites but relying on foreign launching facilities, and learning launching capacities. Experiencing three time launchings of KITSAT, the current satellite projects of Korea are undertaken as follows: - Koreasat - STSAT - Komsat - MBSAT - COMS (Communication, Ocean, and Meteorological Satellite) Koreans waked up to the things of outer space in 2008 with the first Korean astronaut Li So-yeon, a lady bio systems engineer. Although the first Korean made rocket in cooperation with a Russian company to fire last August 2009 was a failure, it should be considered as an inevitable process for future endeavors. There are currently three outer space related laws of Korea: Aerospace Industry Development Promotion Act 1987, Outer Space Development Promotions Act 2005, and Space Damage Compensation Act 2008. The first two stemming from the two different ministries are, however, overlapping in many aspects and have some shortcomings to be improved.