• Journal of the Korean Magnetics Society
• /
• v.21 no.2
• /
• pp.61-66
• /
• 2011

The miniaturization of electrostatic precipitator is becoming a key element to the success of the efficient electrostatic precipitator due to the limited space allowed to install electrostatic precipitator in subway tunnel. Nowadays, a research on electrostatic precipitator in urban railroad equipment technology is under an active study. Finite element method has been used one of the most popular techniques, but it consumes a lot of time especially in computation iterations. Accordingly, the lumped parameter analysis can be an alternative tool to FEM because of its computation iteration capability with fair accuracy. In this paper, lumped parameter model and the simulation results are presented. In addition, the result of lumped parameter analysis is compared with those obtained from finite element analysis for verification.

• Journal of the Korean Society of Visualization
• /
• v.16 no.2
• /
• pp.45-52
• /
• 2018

The tangential and axial cyclones were fabricated using a 3D printer and the total collecting efficiency, cut-diameter, and pressure drop characteristics of the two types of cyclones with the same inlet area were investigated experimentally. The results show that the total collecting efficiency tends to increase as the inlet velocity increases. However, at a 20m/s condition of the tangential cyclone, the collected particles were re-entrained to the ascending vortex flow, resulting in a decrease of the total collecting efficiency. In the axial cyclone, the cross-sectional area is designed to increase at the inlet and the velocity is reduced, so that the re-entrainment effect does not appear in this study. The pressure loss of the tangential cyclone was larger than that of the axial cyclone. The cut-diameter tends to decrease with increasing the inlet velocity in two types of cyclones, except for the 20m/s condition of the tangential cyclone.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.5
• /
• pp.67-75
• /
• 2013

This study is flow analysis on the smoke collector in smoking room. The smoke collector for improving impure air at smoking area is analyzed and the inner flow filed in smoke collector is confirmed on the study result. The velocity with pressure distribution according to suction flow rate at filter entrance is also compared. Pressure characteristic and pressure resistance coefficient are analyzed according to flow analysis result for each other filter. The pressure drop of about 15 Pa occurs at the normal driving mode to strainer inlet from HEPA filter outlet. On the other hand, the pressure drop about 44% increases at turbo mode.

• 전기의세계
• /
• v.33 no.10
• /
• pp.625-630
• /
• 1984

압전변압기는 압전효과를 응용한 점화소자와 필터의 중간적인 존재로서 그 두 기능을 합친 것과 같은 특성을 가지며, 전기적 에너지가 기계적 에너지로 변환된 후 다시 전기적 에너지로 환원되는 과정을 통하여 고전압을 얻는 변압기이다. 이러한 변압기는 자속을 응용하는 일반적인 변압기와는 달리, 유전체인 압전세라믹소자의 압전현상과 공진현상을 응용하므로 주파수대역이 좁고 취급되는 전류가 적다는 단점이 있으나, 구조가 간단하고, 제작이 용이하며, 소형이고, 손실이 적은 장점들이 있어서 특히 고전압고전류원을 필요로하는 음극선관, 음이온발생기, 집진기, 전자복사기, 도장기 등에 이용되고 있으며, 최근에는 다른 분야에도 응용이 시도되고 있다. 여기서는 기존의 압전변압기 중에서 가장 많이 쓰이고 있는 Rosen형(또는 transverse형)압전변압기의 구조와 특성들을 간단히 기술하고, 새로운 형태인 적층형 압전변압기에 관하여 소개하고자 한다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.11
• /
• pp.17-23
• /
• 2021

A cyclone is a dust-separating mechanism that works on the principle of centrifugal force. The performance of a cyclone is evaluated using pressure loss and collection efficiency. A multi-cyclone arrangement is used to improve the collection efficiency within a limited area. In this study, experiments and numerical analyses were conducted on a dual arrangement of mini-hydrocyclone separators, which was fabricated using 3D printing. The experiment was performed at an inlet flow rate of 0.7 m/s, and alumina powder with a particle size of 0.5, 15, and 50 ㎛. ANSYS FLUENT, was used for the numerical analysis. The reliability of the numerical analysis was verified through a comparison with the experimental results. The errors in the experiment and numerical analysis were confirmed to be 2% at the outlet flow rate.