• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.4
• /
• pp.60-67
• /
• 2008

This paper presents a new full-bridge soft switching PWM DC-DC converter circuit topology that adding two switcher, two lossless snubber quasi-resonance capacity, two diode to power source for general welding machine. This half bridge soft switching Is low voltage hight current output that first coil current is smaller than second coil current in high frequency transformer can be obtained with decreasing path loss in conventional DC bus line switcher. As it operate ZCS/ZVS in full range, high frequency, high efficiency and high output are implemented at low voltage and high DC current switching power supplies. All of this items are got from simulation and the result of experiment. If make up for the weak points of this proposed circuit, it will be used more easily for next generation TIG, MIG and MAG type of arc-welding machine.

• KIPE Magazine
• /
• v.6 no.1
• /
• pp.12-19
• /
• 2001

• KIPE Magazine
• /
• v.26 no.4
• /
• pp.64-69
• /
• 2021

• Journal of IKEEE
• /
• v.13 no.4
• /
• pp.82-88
• /
• 2009

This paper is analyzed for a step up-down DC/DC chopper of high efficiency added electric isolation. The converters of high efficiency are generally made that the power loss of the used semiconductor switching devices is minimized. To achieve high efficiency system, the proposed chopper is constructed by using a partial resonant circuit. The control switches using in the chopper are operated with soft switching by partial resonant method. The control switches are operated without increasing their voltage and current stresses by the soft switching technology. The result is that the switching loss is very low and the efficiency of the chopper is high. The proposed chopper is also added electric isolation which is used a pulse transformer. When the power conversion system is required electric isolation, the proposed chopper is adopted with the converter system development of high efficiency. The soft switching operation and the system efficiency of the proposed chopper are verified by digital simulation and experimental results.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.1
• /
• pp.59-64
• /
• 2008

Recently, DC-DC choppers must be increased switching frequency in order to achieve a small size, a light weight and a low noise. However, the switches of chopper are subjected to high switching power losses and switching stresses. As a result of these, the chopper system bring on a low power efficiency. To improved these, this paper is studied on a new DC-DC chopper of high efficiency operated with soft switching(that is, zero current switching and zero voltage switching, ZVCS), of semiconductor switches using in chopper. The soft switching operation is applied to a partial resonant method that the switches operate at zero current of inductor and zero voltage of capacitor in resonant circuit. And the partial resonant circuit makes use of a inductor using step-up and a snubber capacitor, the circuit topology of chopper is simple. Some simulative results on computer and experimental results confirm the validity of analytical results of the DC-DC chopper.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.33-34
• /
• 2015

본 논문에서는 넓은 전압 변동을 가지는 에너지 저장장치의 효율을 높이기 위한 새로운 스위칭 기법을 제안한다. 배터리 입출력 전류리플을 줄이기 위하여 3상 인터리브드 방식을 사용하였다. 중부하시 배터리 전압 크기와 부하 변동에 따라 주파수를 가변하여 출력 전력을 제어한다. 그리고 경부하시 스위칭 주파수를 고정하고 듀티를 제어하여 출력 전력을 제어한다. 제안하는 스위칭 기법을 적용한 시스템의 시뮬레이션을 통해 타당성을 검증한다.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.3
• /
• pp.19-25
• /
• 2008

In this paper, author proposes a novel step-up AC-DC chopper operated with power factor correction(PFC) and with high efficiency. The proposed chopper behaves with discontinuous current control(DCC) of input current. The input current waveform in the proposed chopper is got to be a discontinuous sinusoid form in proportion to magnitude of ac input voltage under the constant duty cycle switching. Therefore, the input power factor is nearly unity and the control method is simple. In the general DCC chopper, the switching devices are turned-on with the zero current switching, but turn-off of the switching devices is switched at current maximum value. To achieve a soft switching of the switching rum-off, the proposed chopper is used a new partial resonant circuit. The result is that the switching loss is very low and the efficiency of chopper is high.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.88-94
• /
• 1999

This paper describes the high efficiency inverter ballast circuit using very cheap microprocessor, which has been developed by the author. A variety of soft-switching techniques have been proposed to reduce the switching losses and EMI publems that accur with higher switching frequencies in switched inverter ballast 1be inverter ballast circuit, which employs a temperature sensing circuits has been also proposed to improve starting performance of the fluorescent lamps. That is, the inverter ballast circuit, which employs a soft-starting circuits and soft-switching techniques to implement the power factoc correcticn and to mitigate of power-loss and iocrease a life time of the fluorescent lamps, has become an attractive performance forballasting the fluorescent lamps. In this paper, the operation and the control of the inverter ballast are described in detail and experimental results are presented. As the experimental results, when enviroment temperatture is at TEX>$-40^{\circ}C$, the inverter ballast circuit has low THD(4.8%) of the input current and large power factor(98%) of the lamp current. The proposed improved ballast circuit awears to be a good performance for ballasting fluorescent lamps. lamps.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.2
• /
• pp.142-148
• /
• 2006

In this paper, authors propose a novel step-up AC-DC converter operated with power factor correction (PFC) and with high efficiency. The proposed converter behaves with discontinuous current control (DCC) of input current. The input current waveform in the proposed converter is got to be a discontinuous sinusoid form in proportion to magnitude of at input voltage under the constant duty cycle switching. Therefore, the input power factor is nearly unity and the control method is simple. In the general DCC converters, the switching devices are turned-on with the zero current switching (ZCS). But turn-off of the switching devices is done at the maximum current. To achieve a soft switching at turn-off, the proposed converter uses a new partial resonant circuit, which results in the very low switching loss and the high efficiency of converter.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.4
• /
• pp.377-383
• /
• 1999

A new soft switching single stage AC-DC full bridge boost converter with unit input power factor and isolated output i is presented in this paper. Due to the use of a non-dissipative snubber on the primary side, a single stage high-power f factor isolated full bridge boost converter has a significant reduction of switching losses in the main switching devices. The non-dissipative snubber adopted in this study consists of a snubber capacitor Cr, a snubber inductor Cr, a fast r recovery snubber diode Dr' and a commutation diode Dp. This paper presents the complete operating principles, t theoretical analysis and experimental results.