• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.1
• /
• pp.69-72
• /
• 2015

This study investigated the effects of oil dose and soil texture on the analysis results for total petroleum hydrocarbon (TPH) in artificially oil-contaminated soils. The same amount of diesel was mixed with soils having different soil texture, and soil TPH concentrations were then analyzed for comparison. Presence of clay in the soil showed lower soil TPH analysis results than that of sand only. As the clay content was increased in the soil, the lower soil TPH concentration was obtained by incompleteness of solvent extraction. As the organic matter content in soil was increased from 5.2% to 10% (weight basis), a higher concentration of TPH was obtained by TPH analysis. However, at a higher organic content in the soil, 18%, resulted in a lower TPH concentration than those of 5.2% and 10%. Gasoline dose to the soil resulted in a significantly low TPH concentration due to the volatilization of gasoline while soil mixing and analysis. This study results would provide fundamental information either to the expectation of TPH concentration in artificially oil-contaminated soil or to estimation of oil release in the real oil-contaminated site.

• Analytical Science and Technology
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2004

The synergistic solvent extraction of Mn(II) by N-nitroso-N-phenylhydroxylamineammonium salt (cupferron) and tetrabutylammonium ion ($TBA^+$) has been studied. In the presence of $TBA^+$, over 95% Mn(II) was extracted from an aqueous solution into chloroform by the cupferron in the pH range of 4 to 10. But a part of Mn(II) was extracted with only cupferron. The ternary complex of Mn(II) was more efficiently extracted into $CH_2Cl_2$ and $CHCl_3$ than other nonpolar solvents. The extracted Mn(II) was determined in the back-extracted $HNO_3$ solution by GF-AAS. This fixed procedure was applied to the determination of trace Mn(II) in tap water samples of pH 5.0. The detection limit equivalent to 3 times standard deviation of the background absorption was 0.37 ng/mL and Mn(II) was determined with the range of 0.4 to 1.01 ng/mL in our laboratory's tap water. And the recovery was 94 to 107% in samples in which 2.0 ng/mL Mn(II) was spiked. The interferences of common concomitant elements such as Cu(II), Ca(II), Fe(III) and so on were not shown up to $10{\sim}20{\mu}g/mL$. From these results, this procedure could be concluded to be applied for the determination of trace Mn(II) in other environmental water samples.

• Journal of Energy Engineering
• /
• v.28 no.3
• /
• pp.1-9
• /
• 2019

A major stress determining the remaining life of the tube in feedwater heater of fossil fuel power plant is hoop stress by the internal pressure. However, thermal stress due to temperature difference across the wall thickness also contributed to reduce the remaining life of the tube. Therefore, thermal loading must be considered even though the contribution of internal pressure loading to the stresses of the tube was known to be much higher than that of the thermal loading. In this study, thermal stress of the tubes in the de-superheating zone was estimated, which was generated due to the temperature difference across the tube thickness. Analytic equations were shown for determining the hoop stress and the radial stress of the tube with uniform thinning and for the temperature across the tube thickness. Accuracy and effectiveness of the analytic equations for the stresses were verified by comparing the results obtained by the analytic equations with those obtained from finite element analysis. Using finite element analysis, the stresses for eccentric thinning were also determined. The effect of heat transfer coefficient on thermal stress was investigated using series of finite element analyses with various values of heat transfer coefficient for both inner and outer surface of the tube. It was shown that the effect of heat transfer coefficient at outer surface was larger than that of heat transfer coefficient at inner surface on the thermal stress of the tube. Also, the hoop stress was larger than the radial stress for both cases of uniformly and eccentrically thinned tubes when the thermal loading was only considered without internal pressure loading.

• Journal of Korean Society of Forest Science
• /
• v.112 no.3
• /
• pp.290-302
• /
• 2023

The aim of this study was to examine the changes in the initial tree growth characteristics of Q. variabilis planted in forest fire-damaged areas treated with soil moisturizers such as biochar and to identify the factors that affect tree growth. To evaluate the effectiveness of soil moisture treatment in the area planted with QV, an experimental plot was created according to the treatment method (spread and mix) and treatment ratio (0, 4, and 40 t/ha). The survival rate of QV was 20% higher in the treatment plot than in the control plot. The height and root collar diameter (RCD)growths of QV were high on the northern slope with spread treatment and on the southern slope with mix treatment. The relative growth rate (RGR) according to the soil moisturizer treatment method was higher in the mix treatment, showing a significant difference in RCD. The northern slope had a higher RGR and significant growth rate. This suggests that the growth improvement effect may depend on the soil moisturizer treatment method. The aspect or treatment method affectsthe drying conditions of the soil, which in turn affects its moisture content or nutrient dynamics. The present research results can be used to establish soil moisturizer treatment standards that are suitable for growth purposes. In addition, this study demonstrates that biochar treatment can be considered as an effective alternative to boost biomass and facilitate early restoration of forest fire-damaged areas.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.439-446
• /
• 2023

Ceramic membranes are generally used for various industrial processes operating under extreme conditions because of its high thermal and chemical stability. However, due to the trade-off phenomenon of permeability and mechanical strength, preparation of high permeability-high strength membrane is necessary. In this study, the change in characteristics and performances of ceramic membranes was analyzed depending on the type of polymer binder and its mixing ratio. Because the solubility between solvent and polymer binder was higher in PSf (polysulfone) than in PES (polyethersulfone), the viscosity and discharge pressure of the PSf-based dope solution were higher than those of PES-based dope solution. When PSf was used as a polymer binder, ceramic membrane showed high mechanical strength and low water permeability due to the dense structure. On the other hand, in case of PES, the mechanical strength was slightly reduced and the water permeability was increased. It was confirmed that the optimum mixing ratio of the PSf and PES with high water permeability and mechanical strength was 9:1.

• Economic and Environmental Geology
• /
• v.20 no.4
• /
• pp.273-288
• /
• 1987

연화(蓮花) 연(鉛) 아연광산(亞鉛鑛山)은 광체(鑛體)의 분포(分布)에 따라 본산지구(本山地區), 동점지구(銅店地區) 및 태백지구(太白地區)로 구분할 수 있다. 태백지구(太白地區)에 대한 본격적인 탐광(探鑛)이 시작되기 전인 1981년 당시, 약 25년 동안 채광작업(採鑛作業)이 진행되어 온 본산지역(本山地域)은 주종광체(主宗鑛體)인 월암(月岩) 및 남산광체(南山鑛體)가 -600m level에서 하한(下限)이 드러남에 따라 광량(鑛量)이 크게 소진(消盡)된 상태였으며, 동점지성(銅店地城)은 상하(上下)의 광황변화(鑛況變化)는 크지 않으나 광체(鑛體)의 규모(規模)가 비교적 작아, 조업(操業)의 안정(安定)을 위해서는 신광화대(新鑛化帶)의 개발(開發)이 시급(時急)한 과제(課題)로 대두되었다. 이에 따라 평천(平川), 태백(太白), 동점역(銅店驛), 방터골, 삼방산광화대(三芳山鑛化帶) 등 연화(蓮花) 전역(全域)에 걸쳐 모암(母岩)의 분포(分布), 지질구조(地質構造), 광징(鑛徵) 등을 검토한 결과 탐광대상(探鑛對象)에서 제외되어 왔던 태백지구(太白地區)가 다음과 같은 점에서 유망(有望)한 탐사후보지(探査候補地)로 부각되었다. 첫째, 지표(地表)에서는 풍촌석회암층(豊村石灰岩層)이 분포(分布)되지 않으나 지질구조(地質構造)를 검토한 결과 -300m level 하부(下部)에서는 이의 전층(全層)이 분포(分布)할 것으로 예상되며, 둘째, 두무동층(斗務洞層) 및 동점규암층내(銅店珪岩層內)에서 발견된 광징(鑛徵)들이 하부(下部)의 풍촌석회암내(豊村石灰岩內)로 연장(延長)되면 부광부(富鑛部)를 이룰 것으로 기대되고, 셋째, 지층(地層)의 경사(傾斜)가 $50^{\circ}$ 이상(以上)인 점, 석영반암(石英斑岩)이 분포(分布)하는 점 등은 광상배태(鑛床胚胎)에 양호(良好)한 조건(條件)이고, 넷째, 본산지구(本山地區)의 월곡(月谷), 월암(月岩), 남산(南山)등 주종광화대(主宗鑛化帶)의 연장부(延長部)인 점, 다섯째, 중앙견갱(中央堅坑)으로부터 약 2km 거리로 탐사단계(探査段階)에 별도의 신규투자(新規投資) 없이 굴진(掘進)이 가능하다는 개발조건상(開發條件上)의 이점(利點)이 있었다. 이에 따라 태백지구(太白地區)에 대한 지표정사(地表精査), 물리탐사(物理探査) 및 지화탐(地化探)을 실시하고, 20여년간 축적된 연화광산(蓮花鑛山)의 지질(地質), 광상자료(鑛床資料)를 정리(整理), 그 특성(特性)을 태백지구(太白地區) 탐사(探査)의 가설(假說)로 적용하여 시추계획(試錐計劃)을 수립, 1982년 구조시추(構造試錐)를 실시한 결과 지질구조(地質構造), 풍촌석회암층(豊村石灰岩層)의 분포(分布) 등이 거의 예상했던 대로 밝혀졌으며 태백(太白) 1호광체(號鑛體)의 일단(一端)이 확인되기에 이르렀다. 1983년(年) 7월(月) 본산지구(本山地區) -600m level에서 태백(太白) 크로스 탐광굴진(探鑛掘進)이 착수되었으며, 1985년에 마침내 갱내(坑內)에서 태백(太白) 1호(號), 2호(號) 광체(鑛體)가 착광(着鑛)되었다. -600m level에서의 태백(太白) 1호광체(號鑛體)의 규모(規模)는 연장(延長) 300m, 평균맥폭(平均脈幅) 8.5m이며, 품위(品位)는 Pb 4.5%, Zn 4.5%, Ag 109g/t이다. 태백광화대(太白鑛化帶)의 지질학적(地質學的) 예상광량(豫想鑛量)은 1,000만(萬)t 이상(以上)이 될 것으로 추정(推定)되며, 현재 -480m level에서 -720m level에 이르기까지 5개 level에서 가행(稼行)되고 있다. 현재 level에서 태백(太白) 1호(號) 광체(鑛體)는 풍촌석회암층(豊村石灰岩層) 및 화절층(花折層)을 모암(母岩)으로 하여 맥상광상(脈狀鑛床)으로 생산(生産)되며, 맥석광물(脈石鑛物)은 능망간석, Mn-방해석(方解石), 방해석(方解石), 석영(石英) 등이고 광석광물(鑛石鑛物)은 섬아연석(閃亞鉛石), 방연석(方鉛石), 황철석(黃鐵石), 자유철석(磁硫鐵石), 유비광석(硫砒鑛石), 황동석(黃銅石), 사면동석(四面銅石), 엘렉트럼 등이다. 태백지구(太自地區)는 광상(鑛床)의 산출상태(産出狀態) 및 지질(地質), 광상학적(鑛床學的) 환경(環境)이 본산지구(本山地區)와 거의 동일(同一)함이 밝혀지고 있다. 태백지구(太白地區)에서는 현재 태백(太白) 1호(號), 2호(號), 3호(號), 5호(號) 및 절골 1호(號), 2호(號) 등 6개 광화대(鑛化帶)에 대한 탐광(探鑛)이 진행되고 있다.

• Asia Marketing Journal
• /
• v.13 no.3
• /
• pp.55-77
• /
• 2011

This study investigate the interaction effects of bundle price discount framing and message framing on consumer's attitude of bundle component. Although each effect of bundle price discount framing and message framing has been explored individually, few attempts have been made to invest them jointly. This study tests the interaction effects of bundle price discount framing and message framing on consumer's evaluation of bundle component. Moreover, this research focuses on consumer's evaluation of individual bundle component while the existing research on bundling primarily focused on consumer's evaluation of the bundle. Prior research suggests that consumers are sensitive to the framing of prices and discounts in the presentation of the bundle offer. For example, there is considerable evidence that partitioning or consolidating the prices of a bundle can influence the attractiveness of the bundle offer. Similarly, there is evidence that an equivalent price reduction to the overall bundle, one of the individual products in the bundle, or distributed among the individual products in the bundle can alter the perceived attractiveness of the offer (e.g. Chakravarti, Krish, Paul, and Srivastava 2002; Hamilton and Srivastava 2008; Janiszewski and Cunha 2004; Johnson, Herrmann and Bauer 1999; ; Morwitz, Greenleaf, and Johnson 1998; Yadav 1994; 1995). In line with these earlier research, this research suggests that the bundle type can influence the consumer's evaluation of bundle component. There are two types of bundle - mixed-leader bundle and mixed-joint bundle. In mixed-leader bundling, the price of one of the two products is discounted when the other product is purchased at the regular price. In mixed-joint bundling, a single price is set when the two product are purchased jointly. This study supposes that the teeth whitening product is the leader product in a mixed-leader bundle. So bundle price discount framing is manipulated such as "Buy the teeth whitening product (regular price \80,000) and get 50% discount on the functional toothpaste(regular price \40,000), special set price \100,000" or "Buy the functional toothpaste and the teeth whitening product as a set and get discount for the set, special set price \60,000". Message framing is manipulated through the product claims described in an advertising bill. The positive framing presents that "Over 95% of users achieved the expected 2-3 shades of improvement in two weeks" where as the negative framing presents "less than 5% of users did not achieve the expected 2-3 shades of improvement in two weeks". This study uses hypothetical brand name of the teeth whitening product and the functional toothpaste This study is based on a 2x2 factorial design with bundle discount framing (mixed-leader bundle vs. mixed-joint bundle) and massage framing (positive vs. negative). The dependant variables are consumer's perceived quality and attitude of the teeth whitening product The data reveals that two dependant variables are correlated, so the data is analyzed with two-way MANOVA. This research explores the significant interaction effect of bundle discount framing and message framing on consumer's perceived quality and attitude of the teeth whitening product. When the message framing is positive, consumer's perceived quality and attitude of the teeth whitening product is higher in mixed-leader bundle than mixed-joint bundle condition. However, when the message framing is negative, consumer's evaluation is higher in mixed-joint bundle than mixed-leader bundle. The author explains this result by stating that consumers are less likely to use heuristics such as price-quality association and value discounting hypothesis(Raghubir 2004) in the negative message framing condition. Additionally, consumer's perceived risk of the teeth whitening product in the negative message framing condition can be more reduced by the bundle partner(e.g. the toothpaste) in mixed-joint bundle than mixed-leader bundle. Based on the results, marketing managers are advised to use different bundle type based on message framing of their product.

• Food Science and Preservation
• /
• v.23 no.5
• /
• pp.718-726
• /
• 2016

Sweet pumpkin paste (SPP) was fermented by Leuconostoc mesenteroides SM at $25^{\circ}C$ for 3 days for enhancing its physicochemical properties. SPPs with 5%, 10%, and 15% solid contents (SC) were fortified with 20% sucrose and 0.5% yeast extract. The unfermented SPP with 15% SC indicated L, a, and b color values of 25.02, 4.66, and 13.35, respectively, and a consistency index of $48.6Pa{\cdot}s^n$. During the 3 days of fermentation, both the a and b color values decreased slightly, whereas the consistency index increased to $188.8Pa{\cdot}s^n$, giving the fermented product a pudding-like consistency. This fermented SPP (15% SC) showed the highest acid production and viable cell counts among samples, indicating pH 3.85, 1.30% acidity and $9.2{\times}10^8CFU/mL$ respectively. The added sucrose was completely utilized after 1 day of fermentation. After 3 days, the insoluble and soluble dextran contents were 8.9% and 4.5%, respectively. Furthermore, the contents of mannitol and fructose were 3.11% and 1.76%, respectively. Regarding the sensory evaluation, this fermented sample also indicated the highest color, taste and texture scores, and was the overall preferred sample. In conclusion, the fermented SPP with 15% SC was carotinoid-rich a wholesome pumpkin-based product that is rich in probiotics and lactic bacteria-produced mannitol and dextran, which gave the product an acceptable viscous pudding-like consistency and good organoleptic properties.