• Journal of KSNVE
• /
• v.8 no.6
• /
• pp.1030-1036
• /
• 1998

When the lateral dimensions of a duct is larger than or comparable to the wavelengths of Interest, higher order modes propagate in the duct. These modes will be radiated and produce noise. A number of sensors and actuators for control of radiating noise from the duct have to be incorporated with the number of modes which one wants to control. These considerations motivated the present study that considers a control system which has less microphones and control sources than required. In this work, by theoretical analysis, the control performance of such a kind of system is investigated in terms of sound-field variables and control system variables. The possible maximum and minimum value. mean and variance of residual acoustic potential energy are derived for the set of primary sound fields.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.301-306
• /
• 2004

자동차의 경음기는 보행자나 다른 차량에게 경고를 보내기 위해 필요한 장치로 너무 작은 소리를 내는 경우에는 경고를 전달할 수 없는 문제점이 생기고, 너무 큰 소리를 내는 경우에는 소음피해를 주게 된다. 경음기의 소리 크기 뿐만 아니라 음색 또한 무시할 수 없는 중요한 인자라 할 수 있는데 이것은 경고음에 대한 사람의 반응에 영향을 줄 뿐만 아니라 자동차에 대한 고객들의 감성적인 평가에 영향을 미치기 때문이다. 본 연구에서는 자동차용 디스크 타입 경음기의 특징을 이해하기 위해 진동 및 음향특성에 관한 실험을 수행하였고, 이를 기반으로 전자기적, 기계적인 힘의 상호관계를 바탕으로 FEM, BEM 등의 방법으로 해석하였으며, 경음기의 소음 진동 특성을 시뮬레이션하였다. 이를 바탕으로 경음기의 형상 인자와 경음기의 소음 특성간의 관계를 해석하여 진동판과 방사판의 형상에 따른 주파수 특성관계를 도출하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.6
• /
• pp.521-527
• /
• 2010

This article presents a method to calculate the sound radiation of transmission gearbox housing by using Helmholtz integral. Rayleigh integral is used to verify the method. Half-space radiation is considered because the actual gearbox housing is on hard place like concrete. For optimization, orthogonal array is used as a fractional factorial design method. Sound Radiation is calculated with simple source like plate and sphere shape, then actual gearbox BEM model is applied to the method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.891-896
• /
• 2007

Noise radiated from the powertrain is an important factor of the vehicle interior noise. In this paper, Finite Element(FE) model and Boundary Element(BE) models were created. The FE model was updated by doing a correlation between experimental modal analysis(EMA) values and finite element analysis(FEA) values. Main bearing forces were calculated using a running modal data. The forced vibration analysis was simulated using the software MSC/NASTRAN, and the radiated noise was predicted using the software LMS/VIRTUAL.LAB.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.269-274
• /
• 2007

With the importance of comfortable environment, research about noise reduction of construction is consisting much. If construction receives the input force, noise will be generated thereby. We must predict vibration and noise characteristic to reduce structured borne noise, and construction which become a basis of such research is plate. In order to predict the radiating noise from the vibrating surface. It is required to know the velocity distribution of vibration surface exactly. It is good to use bead for reducing vibration and noise of plate. In this study, we have analyzed structure-borne noise of plate with bead and compare with plate that there is no bead about equal exciting force.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.524-529
• /
• 1998

Analogous problem for a gear dynamics where helical gears excite logitudinal forces in the shaft is studied. These shaft forces excite the supporting gear housing through bearing, causing structural vibration. In this study, shaft is modeled as a rod, and bearing is modeled by a massless spring. A simple model for gear housing is a clamped circular plate. To model this force transmission, the transfer functions from the shaft to a clamped circular plate are analytically derived by using the spectral method and four-pole parameter. Finally, radiated noise is computed, using the acoustic relations due to plate surface vibration.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.317-322
• /
• 1994

본 연구에서는 원통면 음향 홀로그래피 방법에 대한 세밀한 고찰을 통하여 이 방법을 이용한 음장예측의 실제 적용에 도움을 주고자 한다. 먼저 원통면 음향 홀로그래피 방법의 기본적인 이론에 대한 고찰을 하였고, 원통면 음향 홀로그래피 방법의 실제 적용시 나타나는 창문함수의 영향(window effect)이나 공간상의 엘리어싱(spatial aliasing), 둘러싸기 오차(wraparound error)와 같은 오차에 대하여 모의 실험을 통하여 살펴보았다. 이러한 오차해석을 통하여 가능한 한 오차를 줄이고 신뢰할 수 있는 예측결과를 얻을 수 있는 측정조건을 제시하였으며, 오차를 감소시킬수 있는 Tukey 창문함수의 사용과 제로패딩(zero padding) 방법을 제시하였다. 이러한 기본적인 이해를 바탕으로 원통형 구조물의 방사음장을 예측하는 실험을 하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.518-523
• /
• 2009

Main source of URN(Underwater Radiated Noise) which is related to the ship's survivability is divided into two groups. Cavitation is main source of URN when the speed of ship is upper than CIS(Cavitation Inception Speed). But when the speed of ship is lower than CIS, main source of URN is structure-borne noise on the hull which is originated from propulsion system, pump system or transmitted vibration of pipe system. In this paper, to reduce the vibration of discharge pipe and valve system, back flow prevent globe valve and new rubber mount are applied to the ship. As the result of applying new valve and mount, the vibration is reduced drastically.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.759-762
• /
• 2002

Automobile aeroacoustics Is a developing area of technology where experimental and theoretical tools are being continuously refined to understand, analyze and modify the noise-generating mechanisms in the vehicle flow. Main sources of ground vehicle exterior noise are the tires (tire/road interaction) and the unsteady flow field around the vehicle. In this study, the sound source localization of a rolling tire was applied to the measurement of radiated sound by using an acoustic mirror system. A possible flow pattern that develops is suggested based on detailed wind tunnel investigations with a rotating wheel in contact with a moving belt.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.138-142
• /
• 2001

A comparison between theoretical and measured transfer function, which relates structure-borne noise source level to underwater radiated noise, of a naval ship is presented in this study. Transfer functions are obtained by dividing far field underwater noise by the value of structure borne noise source levels below machinery mounts. In prediction, statistical energy analysis of the whole ship structure is used to get vibration levels of wetted hull plates below water line. Then, far field radiated noise is calculated by summing up contributions from each plates using vibration levels and radiation efficiencies. And 1/3-octave band underwater sound pressure at the distance of 1 m away from the hull were measured to get experimental transfer functions. The two transfer functions are compared to show resonable agreements in spite of the subtle physical differences between each other.